AMiRo-OS

/**

  ******************************************************************************

  * @file    misc.c

  * @author  MCD Application Team

  * @version V3.5.0

  * @date    11-March-2011

  * @brief   This file provides all the miscellaneous firmware functions (add-on

  *          to CMSIS functions).

  ******************************************************************************

  * @attention

  *

  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS

  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE

  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY

  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING

  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE

  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

  *

  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>

  ******************************************************************************

  */

/* Includes ------------------------------------------------------------------*/

#include "misc.h"

/** @addtogroup STM32F10x_StdPeriph_Driver

  * @{

  */

/** @defgroup MISC 

  * @brief MISC driver modules

  * @{

  */

/** @defgroup MISC_Private_TypesDefinitions

  * @{

  */

/**

  * @}

  */ 

/** @defgroup MISC_Private_Defines

  * @{

  */

#define AIRCR_VECTKEY_MASK    ((uint32_t)0x05FA0000)

/**

  * @}

  */

/** @defgroup MISC_Private_Macros

  * @{

  */

/**

  * @}

  */

/** @defgroup MISC_Private_Variables

  * @{

  */

/**

  * @}

  */

/** @defgroup MISC_Private_FunctionPrototypes

  * @{

  */

/**

  * @}

  */

/** @defgroup MISC_Private_Functions

  * @{

  */

/**

  * @brief  Configures the priority grouping: pre-emption priority and subpriority.

  * @param  NVIC_PriorityGroup: specifies the priority grouping bits length. 

  *   This parameter can be one of the following values:

  *     @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority

  *                                4 bits for subpriority

  *     @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority

  *                                3 bits for subpriority

  *     @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority

  *                                2 bits for subpriority

  *     @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority

  *                                1 bits for subpriority

  *     @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority

  *                                0 bits for subpriority

  * @retval None

  */

void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)

{

  /* Check the parameters */

  assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));

  /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */

  SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;

}

/**

  * @brief  Initializes the NVIC peripheral according to the specified

  *         parameters in the NVIC_InitStruct.

  * @param  NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains

  *         the configuration information for the specified NVIC peripheral.

  * @retval None

  */

void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)

{

  uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;

  /* Check the parameters */

  assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));

  assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));  

  assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));

  if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)

  {

    /* Compute the Corresponding IRQ Priority --------------------------------*/    

    tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;

    tmppre = (0x4 - tmppriority);

    tmpsub = tmpsub >> tmppriority;

    tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;

    tmppriority |=  NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;

    tmppriority = tmppriority << 0x04;

    NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;

    /* Enable the Selected IRQ Channels --------------------------------------*/

    NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =

      (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);

  }

  else

  {

    /* Disable the Selected IRQ Channels -------------------------------------*/

    NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =

      (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);

  }

}

/**

  * @brief  Sets the vector table location and Offset.

  * @param  NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.

  *   This parameter can be one of the following values:

  *     @arg NVIC_VectTab_RAM

  *     @arg NVIC_VectTab_FLASH

  * @param  Offset: Vector Table base offset field. This value must be a multiple 

  *         of 0x200.

  * @retval None

  */

void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)

{ 

  /* Check the parameters */

  assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));

  assert_param(IS_NVIC_OFFSET(Offset));  

  SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);

}

/**

  * @brief  Selects the condition for the system to enter low power mode.

  * @param  LowPowerMode: Specifies the new mode for the system to enter low power mode.

  *   This parameter can be one of the following values:

  *     @arg NVIC_LP_SEVONPEND

  *     @arg NVIC_LP_SLEEPDEEP

  *     @arg NVIC_LP_SLEEPONEXIT

  * @param  NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.

  * @retval None

  */

void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)

{

  /* Check the parameters */

  assert_param(IS_NVIC_LP(LowPowerMode));

  assert_param(IS_FUNCTIONAL_STATE(NewState));  

  if (NewState != DISABLE)

  {

    SCB->SCR |= LowPowerMode;

  }

  else

  {

    SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);

  }

}

/**

  * @brief  Configures the SysTick clock source.

  * @param  SysTick_CLKSource: specifies the SysTick clock source.

  *   This parameter can be one of the following values:

  *     @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.

  *     @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.

  * @retval None

  */

void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)

{

  /* Check the parameters */

  assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));

  if (SysTick_CLKSource == SysTick_CLKSource_HCLK)

  {

    SysTick->CTRL |= SysTick_CLKSource_HCLK;

  }

  else

  {

    SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;

  }

}

/**

  * @}

  */

/**

  * @}

  */

/**

  * @}

  */

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/