AMiRo-OS

/************************************************************************************//**

* \file         Source\ARMCM3_STM32\bluetoothUart.c

* \brief        Bootloader BLUETOOTH UART communication interface source file.

* \ingroup      Target_ARMCM3_STM32

* \internal

*----------------------------------------------------------------------------------------

*                          C O P Y R I G H T

*----------------------------------------------------------------------------------------

*   Copyright (c) 2011  by Feaser    http://www.feaser.com    All rights reserved

*

*----------------------------------------------------------------------------------------

*                            L I C E N S E

*----------------------------------------------------------------------------------------

* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or

* modify it under the terms of the GNU General Public License as published by the Free

* Software Foundation, either version 3 of the License, or (at your option) any later

* version.

*

* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;

* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR

* PURPOSE. See the GNU General Public License for more details.

*

* You should have received a copy of the GNU General Public License along with OpenBLT.

* If not, see <http://www.gnu.org/licenses/>.

*

* A special exception to the GPL is included to allow you to distribute a combined work 

* that includes OpenBLT without being obliged to provide the source code for any 

* proprietary components. The exception text is included at the bottom of the license

* file <license.html>.

* 

* \endinternal

****************************************************************************************/

/****************************************************************************************

* Include files

****************************************************************************************/

#include "boot.h"                                /* bootloader generic header          */

#if (BOOT_COM_BLUETOOTH_UART_ENABLE > 0 || BOOT_GATE_BLUETOOTH_UART_ENABLE > 0)

/****************************************************************************************

* Type definitions

****************************************************************************************/

/** \brief BLUETOOTH UART register layout. */

typedef struct

{

  volatile blt_int16u SR;                           /**< status register               */

  blt_int16u          RESERVED0;

  volatile blt_int16u DR;                           /**< data register                 */

  blt_int16u          RESERVED1;

  volatile blt_int16u BRR;                          /**< baudrate register             */

  blt_int16u          RESERVED2;

  volatile blt_int16u CR1;                          /**< control register 1            */

  blt_int16u          RESERVED3;

  volatile blt_int16u CR2;                          /**< control register 2            */

  blt_int16u          RESERVED4;

  volatile blt_int16u CR3;                          /**< control register 3            */

  blt_int16u          RESERVED5;

  volatile blt_int16u GTPR;                         /**< guard time and prescale reg.  */

  blt_int16u          RESERVED6;

} tBluetoothUartRegs;                                        /**< UART register layout type     */

/****************************************************************************************

* Macro definitions

****************************************************************************************/

#if (BOOT_COM_UART_ENABLE == 0 && BOOT_GATE_UART_ENABLE == 0)

/** \brief USART enable bit. */

#define UART_BIT_UE    ((blt_int16u)0x2000)

/** \brief Transmitter enable bit. */

#define UART_BIT_TE    ((blt_int16u)0x0008)

/** \brief Receiver enable bit. */

#define UART_BIT_RE    ((blt_int16u)0x0004)

/** \brief Transmit data reg. empty bit. */

#define UART_BIT_TXE   ((blt_int16u)0x0080)

/** \brief Read data reg. not empty bit. */

#define UART_BIT_RXNE  ((blt_int16u)0x0020)

#endif /* (BOOT_COM_UART_ENABLE == 0 && BOOT_GATE_UART_ENABLE == 0) */

/****************************************************************************************

* Register definitions

****************************************************************************************/

#if (BOOT_COM_BLUETOOTH_UART_CHANNEL_INDEX == 0)

/** \brief Set UART base address to USART1. */

#define BLUETOOTH_UARTx          ((tBluetoothUartRegs *) (blt_int32u)0x40013800)

#elif (BOOT_COM_BLUETOOTH_UART_CHANNEL_INDEX == 1)

/** \brief Set UART base address to USART2. */

#define BLUETOOTH_UARTx          ((tBluetoothUartRegs *) (blt_int32u)0x40004400)

#else

/** \brief Set UART base address to USART1 by default. */

#define BLUETOOTH_UARTx          ((tBluetoothUartRegs *) (blt_int32u)0x40013800)

#endif

/****************************************************************************************

* Function prototypes

****************************************************************************************/

static blt_bool BluetoothUartReceiveByte(blt_int8u *data);

static blt_bool BluetoothUartTransmitByte(blt_int8u data);

/************************************************************************************//**

** \brief     Initializes the BLUETOOTH UART communication interface.

** \return    none.

**

****************************************************************************************/

void BluetoothUartInit(void)

{

  /* the current implementation supports USART1 and USART2. throw an assertion error in 

   * case a different UART channel is configured.  

   */

  ASSERT_CT((BOOT_COM_BLUETOOTH_UART_CHANNEL_INDEX == 0) || (BOOT_COM_BLUETOOTH_UART_CHANNEL_INDEX == 1)); 

  /* first reset the UART configuration. note that this already configures the UART

   * for 1 stopbit, 8 databits and no parity.

   */

  BLUETOOTH_UARTx->BRR = 0;

  BLUETOOTH_UARTx->CR1 = 0;

  BLUETOOTH_UARTx->CR2 = 0;

  BLUETOOTH_UARTx->CR3 = 0;

  BLUETOOTH_UARTx->GTPR = 0;

  /* configure the baudrate, knowing that PCLKx is configured to be half of

   * BOOT_CPU_SYSTEM_SPEED_KHZ.

   */

  BLUETOOTH_UARTx->BRR = ((BOOT_CPU_SYSTEM_SPEED_KHZ/2)*(blt_int32u)1000)/BOOT_COM_UART_BAUDRATE;

  /* enable the UART including the transmitter and the receiver */

  BLUETOOTH_UARTx->CR1 |= (UART_BIT_UE | UART_BIT_TE | UART_BIT_RE);

} /*** end of BluetoothUartInit ***/

/************************************************************************************//**

** \brief     Transmits a packet formatted for the communication interface.

** \param     data Pointer to byte array with data that it to be transmitted.

** \param     len  Number of bytes that are to be transmitted.

** \return    none.

**

****************************************************************************************/

void BluetoothUartTransmitPacket(blt_int8u *data, blt_int8u len)

{

  blt_int16u data_index;

  blt_bool result;

  /* verify validity of the len-paramenter */

  ASSERT_RT(len <= BOOT_COM_UART_TX_MAX_DATA);

  /* first transmit the length of the packet */  

  result = BluetoothUartTransmitByte(len);

  ASSERT_RT(result == BLT_TRUE);  

  /* transmit all the packet bytes one-by-one */

  for (data_index = 0; data_index < len; data_index++)

  {

    /* keep the watchdog happy */

    CopService();

    /* write byte */

    result = BluetoothUartTransmitByte(data[data_index]);

    ASSERT_RT(result == BLT_TRUE);  

  }

} /*** end of BluetoothUartTransmitPacket ***/

/************************************************************************************//**

** \brief     Receives a communication interface packet if one is present.

** \param     data Pointer to byte array where the data is to be stored.

** \return    Length of message (if the message is invalid, the length will be 0).

**

****************************************************************************************/

blt_int8u BluetoothUartReceivePacket(blt_int8u *data)

{

  static blt_int8u xcpCtoReqPacket[BOOT_COM_UART_RX_MAX_DATA+1];  /* one extra for length */

  static blt_int8u xcpCtoRxLength;

  static blt_int8u xcpUartDataLength;

  static blt_bool  xcpCtoRxInProgress = BLT_FALSE;

  /* start of cto packet received? */

  if (xcpCtoRxInProgress == BLT_FALSE)

  {

    /* store the message length when received */

    if (BluetoothUartReceiveByte(&xcpCtoReqPacket[0]) == BLT_TRUE)

    {

      /* save message length */

      xcpUartDataLength = xcpCtoReqPacket[0];

      if (xcpCtoReqPacket[0] > 0)

      {

        /* indicate that a cto packet is being received */

        xcpCtoRxInProgress = BLT_TRUE;

        /* reset packet data count */

        xcpCtoRxLength = 0;

      }

    }

  }

  else

  {

    /* store the next packet byte */

    if (BluetoothUartReceiveByte(&xcpCtoReqPacket[xcpCtoRxLength+1]) == BLT_TRUE)

    {

      /* increment the packet data count */

      xcpCtoRxLength++;

      /* check to see if the entire packet was received */

      if (xcpCtoRxLength == xcpCtoReqPacket[0])

      {

        /* copy the packet data */

        CpuMemCopy((blt_int32u)data, (blt_int32u)&xcpCtoReqPacket[1], xcpCtoRxLength);        

        /* done with cto packet reception */

        xcpCtoRxInProgress = BLT_FALSE;

        /* packet reception complete */

//        return BLT_TRUE;

        return xcpUartDataLength;

      }

    }

  }

  /* packet reception not yet complete */

//  return BLT_FALSE;

  return 0;

} /*** end of BluetoothUartReceivePacket ***/

/************************************************************************************//**

** \brief     Receives a communication interface byte if one is present.

** \param     data Pointer to byte where the data is to be stored.

** \return    BLT_TRUE if a byte was received, BLT_FALSE otherwise.

**

****************************************************************************************/

static blt_bool BluetoothUartReceiveByte(blt_int8u *data)

{

  /* check if a new byte was received by means of the RDR-bit */

  if((BLUETOOTH_UARTx->SR & UART_BIT_RXNE) != 0)

  {

    /* store the received byte */

    data[0] = BLUETOOTH_UARTx->DR;

    /* inform caller of the newly received byte */

    return BLT_TRUE;

  }

  /* inform caller that no new data was received */

  return BLT_FALSE;

} /*** end of BluetoothUartReceiveByte ***/

/************************************************************************************//**

** \brief     Transmits a communication interface byte.

** \param     data Value of byte that is to be transmitted.

** \return    BLT_TRUE if the byte was transmitted, BLT_FALSE otherwise.

**

****************************************************************************************/

static blt_bool BluetoothUartTransmitByte(blt_int8u data)

{

  /* check if tx holding register can accept new data */

  if ((BLUETOOTH_UARTx->SR & UART_BIT_TXE) == 0)

  {

    /* UART not ready. should not happen */

    return BLT_FALSE;

  }

  /* write byte to transmit holding register */

  BLUETOOTH_UARTx->DR = data;

  /* wait for tx holding register to be empty */

  while((BLUETOOTH_UARTx->SR & UART_BIT_TXE) == 0) 

  { 

    /* keep the watchdog happy */

    CopService();

  }

  /* byte transmitted */

  return BLT_TRUE;

} /*** end of BluetoothUartTransmitByte ***/

#endif /* BOOT_COM_BLUETOOTH_UART_ENABLE > 0 || BOOT_GATE_BLUETOOTH_UART_ENABLE > 0 */

/*********************************** end of bluetoothUart.c *************************************/