AMiRo-OS

/*

AMiRo-LLD is a compilation of low-level hardware drivers for the Autonomous Mini Robot (AMiRo) platform.

Copyright (C) 2016..2019  Thomas Schöpping et al.

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU Lesser General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License

along with this program.  If not, see <http://www.gnu.org/licenses/>.

*/

/**

 * @file    alld_INA219.h

 * @brief   Power Monitor macros and structures.

 *

 * @addtogroup lld_power

 * @{

 */

#ifndef AMIROLLD_INA219_H

#define AMIROLLD_INA219_H

#include <amiro-lld.h>

/******************************************************************************/

/* CONSTANTS                                                                  */

/******************************************************************************/

/**

 * @brief Maximum I2C frequency.

 */

#define INA219_LLD_I2C_MAXFREQUENCY   2560000

/******************************************************************************/

/* SETTINGS                                                                   */

/******************************************************************************/

/******************************************************************************/

/* CHECKS                                                                     */

/******************************************************************************/

/******************************************************************************/

/* DATA STRUCTURES AND TYPES                                                  */

/******************************************************************************/

/**

 * @brief I2C address masks.

 */

enum {

  INA219_LLD_I2C_ADDR_FIXED   = 0x0040u,

  INA219_LLD_I2C_ADDR_A0      = 0x0001u,

  INA219_LLD_I2C_ADDR_A1      = 0x0004u,

};

/**

 * @brief Registers.

 */

typedef enum {

  INA219_LLD_REGISTER_CONFIGURATION = 0x00,

  INA219_LLD_REGISTER_SHUNT_VOLTAGE = 0x01,

  INA219_LLD_REGISTER_BUS_VOLTAGE   = 0x02,

  INA219_LLD_REGISTER_POWER         = 0x03,

  INA219_LLD_REGISTER_CURRENT       = 0x04,

  INA219_LLD_REGISTER_CALIBRATION   = 0x05,

} ina219_lld_register_t;

/**

 * @brief BRNG.

 */

typedef enum {

  INA219_LLD_BRNG_16 = 0x00,

  INA219_LLD_BRNG_32 = 0x01,

} ina219_lld_brng_t;

/**

 * @brief Gain settings.

 */

typedef enum {

  INA219_LLD_GAIN_1_40mV = 0x00,

  INA219_LLD_GAIN_2_80mV = 0x01,

  INA219_LLD_GAIN_4_160mV = 0x02,

  INA219_LLD_GAIN_8_320mV = 0x03,

} ina219_lld_gain_t;

/**

 * @brief ADC settings.

 */

typedef enum {

  INA219_LLD_ADC_9BIT = 0x00,

  INA219_LLD_ADC_10BIT = 0x01,

  INA219_LLD_ADC_11BIT = 0x02,

  INA219_LLD_ADC_12BIT = 0x03,

  INA219_LLD_ADC_2 = 0x09,

  INA219_LLD_ADC_4 = 0x0A,

  INA219_LLD_ADC_8 = 0x0B,

  INA219_LLD_ADC_16 = 0x0C,

  INA219_LLD_ADC_32 = 0x0D,

  INA219_LLD_ADC_64 = 0x0E,

  INA219_LLD_ADC_128 = 0x0f,

} ina219_lld_adc_t;

/**

 * @brief Mode settings.

 */

typedef enum {

  INA219_LLD_MODE_POWERDOWN = 0x00,

  INA219_LLD_MODE_SHUNT_TRIGGERED = 0x01,

  INA219_LLD_MODE_BUS_TRIGGERED = 0x02,

  INA219_LLD_MODE_SHUNT_BUS_TRIGGERED = 0x03,

  INA219_LLD_MODE_ADC_OFF = 0x04,

  INA219_LLD_MODE_SHUNT_CONTINUOUS = 0x05,

  INA219_LLD_MODE_BUS_CONTINUOUS = 0x06,

  INA219_LLD_MODE_SHUNT_BUS_CONTINUOUS = 0x07,

} ina219_lld_mode_t;

/**

 * @brief Config register.

 */

typedef union {

  uint16_t data;

  struct {

    ina219_lld_mode_t mode : 3;

    ina219_lld_adc_t sadc : 4;

    ina219_lld_adc_t badc : 4;

    ina219_lld_gain_t gain : 2;

    ina219_lld_brng_t brng : 1;

    uint8_t zero : 1;

    uint8_t reset : 1;

  } options;

} ina219_lld_cfg_t;

/**

 * @brief Calibration input struct.

 */

typedef struct {

  float shunt_resistance_0;

  float max_expected_current_A;

  uint16_t current_lsb_uA;

  ina219_lld_cfg_t cfg_reg;

} ina219_lld_calib_input_t;

/**

 * @brief Calibration output struct.

 */

typedef struct {

  float max_current_before_overflow_A;

  float max_shunt_voltage_before_overflow_V;

  uint16_t current_lsb_uA;

  uint16_t calibration;

} ina219_lld_calib_output_t;

/**

 * @brief The INA219Driver struct

 */

typedef struct {

  apalI2CDriver_t* i2cd;

  apalI2Caddr_t addr;   /**<The address of the INA219 for I2C communication, which is defined by the wiring of the A0 and A1 pins */

  uint16_t current_lsb_uA;

  ina219_lld_cfg_t *config;

} INA219Driver;

/******************************************************************************/

/* MACROS                                                                     */

/******************************************************************************/

/******************************************************************************/

/* EXTERN DECLARATIONS                                                        */

/******************************************************************************/

#ifdef __cplusplus

extern "C" {

#endif

  apalExitStatus_t ina219_lld_calibration(INA219Driver* const ina219, const ina219_lld_calib_input_t* const calib_data, ina219_lld_calib_output_t* const calib_out);

  apalExitStatus_t ina219_lld_read_register(const INA219Driver* const ina219, const ina219_lld_register_t addr, uint16_t* const data, const uint8_t num, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_write_register(const INA219Driver* const ina219, const ina219_lld_register_t addr, const uint16_t* const data, const uint8_t num, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_read_config(const INA219Driver* const ina219, ina219_lld_cfg_t* const cfg, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_write_config(const INA219Driver* const ina219, const ina219_lld_cfg_t cfg, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_read_calibration(const INA219Driver* const ina219, uint16_t* const calib, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_write_calibration(const INA219Driver* const ina219, const uint16_t calib, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_reset(const INA219Driver* const ina219, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_read_shunt_voltage(const INA219Driver* const ina219, int32_t* const data, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_read_bus_voltage(const INA219Driver* const ina219, uint32_t* const data, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_read_power(const INA219Driver* const ina219, uint32_t* const data, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_read_current(const INA219Driver* const ina219, int16_t* const data, const apalTime_t timeout);

  apalExitStatus_t ina219_lld_bus_conversion_ready(const INA219Driver* const ina219, uint16_t* const buscnv, const apalTime_t timeout);

#ifdef __cplusplus

}

#endif

/******************************************************************************/

/* INLINE FUNCTIONS                                                           */

/******************************************************************************/

#endif /* AMIROLLD_INA219_H */

/** @} */