adafruit_bno055 / Adafruit_BNO055.cpp @ e8e79779
History | View | Annotate | Download (19.692 KB)
| 1 |
/***************************************************************************
|
|---|---|
| 2 |
This is a library for the BNO055 orientation sensor
|
| 3 |
|
| 4 |
Designed specifically to work with the Adafruit BNO055 Breakout.
|
| 5 |
|
| 6 |
Pick one up today in the adafruit shop!
|
| 7 |
------> http://www.adafruit.com/products
|
| 8 |
|
| 9 |
These sensors use I2C to communicate, 2 pins are required to interface.
|
| 10 |
|
| 11 |
Adafruit invests time and resources providing this open source code,
|
| 12 |
please support Adafruit andopen-source hardware by purchasing products
|
| 13 |
from Adafruit!
|
| 14 |
|
| 15 |
Written by KTOWN for Adafruit Industries.
|
| 16 |
|
| 17 |
MIT license, all text above must be included in any redistribution
|
| 18 |
***************************************************************************/
|
| 19 |
|
| 20 |
#if ARDUINO >= 100 |
| 21 |
#include "Arduino.h" |
| 22 |
#else
|
| 23 |
#include "WProgram.h" |
| 24 |
#endif
|
| 25 |
|
| 26 |
#include <math.h> |
| 27 |
#include <limits.h> |
| 28 |
|
| 29 |
#include "Adafruit_BNO055.h" |
| 30 |
|
| 31 |
/***************************************************************************
|
| 32 |
CONSTRUCTOR
|
| 33 |
***************************************************************************/
|
| 34 |
|
| 35 |
/**************************************************************************/
|
| 36 |
/*!
|
| 37 |
@brief Instantiates a new Adafruit_BNO055 class
|
| 38 |
*/
|
| 39 |
/**************************************************************************/
|
| 40 |
Adafruit_BNO055::Adafruit_BNO055(int32_t sensorID, uint8_t address) |
| 41 |
{
|
| 42 |
_sensorID = sensorID; |
| 43 |
_address = address; |
| 44 |
} |
| 45 |
|
| 46 |
/***************************************************************************
|
| 47 |
PUBLIC FUNCTIONS
|
| 48 |
***************************************************************************/
|
| 49 |
|
| 50 |
/**************************************************************************/
|
| 51 |
/*!
|
| 52 |
@brief Sets up the HW
|
| 53 |
*/
|
| 54 |
/**************************************************************************/
|
| 55 |
bool Adafruit_BNO055::begin(adafruit_bno055_opmode_t mode)
|
| 56 |
{
|
| 57 |
/* Enable I2C */
|
| 58 |
Wire.begin(); |
| 59 |
|
| 60 |
/* Make sure we have the right device */
|
| 61 |
uint8_t id = read8(BNO055_CHIP_ID_ADDR); |
| 62 |
if(id != BNO055_ID)
|
| 63 |
{
|
| 64 |
delay(1000); // hold on for boot |
| 65 |
id = read8(BNO055_CHIP_ID_ADDR); |
| 66 |
if(id != BNO055_ID) {
|
| 67 |
return false; // still not? ok bail |
| 68 |
} |
| 69 |
} |
| 70 |
|
| 71 |
/* Switch to config mode (just in case since this is the default) */
|
| 72 |
setMode(OPERATION_MODE_CONFIG); |
| 73 |
|
| 74 |
/* Reset */
|
| 75 |
write8(BNO055_SYS_TRIGGER_ADDR, 0x20);
|
| 76 |
while (read8(BNO055_CHIP_ID_ADDR) != BNO055_ID)
|
| 77 |
{
|
| 78 |
delay(10);
|
| 79 |
} |
| 80 |
delay(50);
|
| 81 |
|
| 82 |
/* Set to normal power mode */
|
| 83 |
write8(BNO055_PWR_MODE_ADDR, POWER_MODE_NORMAL); |
| 84 |
delay(10);
|
| 85 |
|
| 86 |
write8(BNO055_PAGE_ID_ADDR, 0);
|
| 87 |
|
| 88 |
/* Set the output units */
|
| 89 |
/*
|
| 90 |
uint8_t unitsel = (0 << 7) | // Orientation = Android
|
| 91 |
(0 << 4) | // Temperature = Celsius
|
| 92 |
(0 << 2) | // Euler = Degrees
|
| 93 |
(1 << 1) | // Gyro = Rads
|
| 94 |
(0 << 0); // Accelerometer = m/s^2
|
| 95 |
write8(BNO055_UNIT_SEL_ADDR, unitsel);
|
| 96 |
*/
|
| 97 |
|
| 98 |
/* Configure axis mapping (see section 3.4) */
|
| 99 |
/*
|
| 100 |
write8(BNO055_AXIS_MAP_CONFIG_ADDR, REMAP_CONFIG_P2); // P0-P7, Default is P1
|
| 101 |
delay(10);
|
| 102 |
write8(BNO055_AXIS_MAP_SIGN_ADDR, REMAP_SIGN_P2); // P0-P7, Default is P1
|
| 103 |
delay(10);
|
| 104 |
*/
|
| 105 |
|
| 106 |
write8(BNO055_SYS_TRIGGER_ADDR, 0x0);
|
| 107 |
delay(10);
|
| 108 |
/* Set the requested operating mode (see section 3.3) */
|
| 109 |
setMode(mode); |
| 110 |
delay(20);
|
| 111 |
|
| 112 |
return true; |
| 113 |
} |
| 114 |
|
| 115 |
/**************************************************************************/
|
| 116 |
/*!
|
| 117 |
@brief Puts the chip in the specified operating mode
|
| 118 |
*/
|
| 119 |
/**************************************************************************/
|
| 120 |
void Adafruit_BNO055::setMode(adafruit_bno055_opmode_t mode)
|
| 121 |
{
|
| 122 |
_mode = mode; |
| 123 |
write8(BNO055_OPR_MODE_ADDR, _mode); |
| 124 |
delay(30);
|
| 125 |
} |
| 126 |
|
| 127 |
/**************************************************************************/
|
| 128 |
/*!
|
| 129 |
@brief Use the external 32.768KHz crystal
|
| 130 |
*/
|
| 131 |
/**************************************************************************/
|
| 132 |
void Adafruit_BNO055::setExtCrystalUse(boolean usextal)
|
| 133 |
{
|
| 134 |
adafruit_bno055_opmode_t modeback = _mode; |
| 135 |
|
| 136 |
/* Switch to config mode (just in case since this is the default) */
|
| 137 |
setMode(OPERATION_MODE_CONFIG); |
| 138 |
delay(25);
|
| 139 |
write8(BNO055_PAGE_ID_ADDR, 0);
|
| 140 |
if (usextal) {
|
| 141 |
write8(BNO055_SYS_TRIGGER_ADDR, 0x80);
|
| 142 |
} else {
|
| 143 |
write8(BNO055_SYS_TRIGGER_ADDR, 0x00);
|
| 144 |
} |
| 145 |
delay(10);
|
| 146 |
/* Set the requested operating mode (see section 3.3) */
|
| 147 |
setMode(modeback); |
| 148 |
delay(20);
|
| 149 |
} |
| 150 |
|
| 151 |
|
| 152 |
/**************************************************************************/
|
| 153 |
/*!
|
| 154 |
@brief Gets the latest system status info
|
| 155 |
*/
|
| 156 |
/**************************************************************************/
|
| 157 |
void Adafruit_BNO055::getSystemStatus(uint8_t *system_status, uint8_t *self_test_result, uint8_t *system_error)
|
| 158 |
{
|
| 159 |
write8(BNO055_PAGE_ID_ADDR, 0);
|
| 160 |
|
| 161 |
/* System Status (see section 4.3.58)
|
| 162 |
---------------------------------
|
| 163 |
0 = Idle
|
| 164 |
1 = System Error
|
| 165 |
2 = Initializing Peripherals
|
| 166 |
3 = System Iniitalization
|
| 167 |
4 = Executing Self-Test
|
| 168 |
5 = Sensor fusio algorithm running
|
| 169 |
6 = System running without fusion algorithms */
|
| 170 |
|
| 171 |
if (system_status != 0) |
| 172 |
*system_status = read8(BNO055_SYS_STAT_ADDR); |
| 173 |
|
| 174 |
/* Self Test Results (see section )
|
| 175 |
--------------------------------
|
| 176 |
1 = test passed, 0 = test failed
|
| 177 |
|
| 178 |
Bit 0 = Accelerometer self test
|
| 179 |
Bit 1 = Magnetometer self test
|
| 180 |
Bit 2 = Gyroscope self test
|
| 181 |
Bit 3 = MCU self test
|
| 182 |
|
| 183 |
0x0F = all good! */
|
| 184 |
|
| 185 |
if (self_test_result != 0) |
| 186 |
*self_test_result = read8(BNO055_SELFTEST_RESULT_ADDR); |
| 187 |
|
| 188 |
/* System Error (see section 4.3.59)
|
| 189 |
---------------------------------
|
| 190 |
0 = No error
|
| 191 |
1 = Peripheral initialization error
|
| 192 |
2 = System initialization error
|
| 193 |
3 = Self test result failed
|
| 194 |
4 = Register map value out of range
|
| 195 |
5 = Register map address out of range
|
| 196 |
6 = Register map write error
|
| 197 |
7 = BNO low power mode not available for selected operat ion mode
|
| 198 |
8 = Accelerometer power mode not available
|
| 199 |
9 = Fusion algorithm configuration error
|
| 200 |
A = Sensor configuration error */
|
| 201 |
|
| 202 |
if (system_error != 0) |
| 203 |
*system_error = read8(BNO055_SYS_ERR_ADDR); |
| 204 |
|
| 205 |
delay(200);
|
| 206 |
} |
| 207 |
|
| 208 |
/**************************************************************************/
|
| 209 |
/*!
|
| 210 |
@brief Gets the chip revision numbers
|
| 211 |
*/
|
| 212 |
/**************************************************************************/
|
| 213 |
void Adafruit_BNO055::getRevInfo(adafruit_bno055_rev_info_t* info)
|
| 214 |
{
|
| 215 |
uint8_t a, b; |
| 216 |
|
| 217 |
memset(info, 0, sizeof(adafruit_bno055_rev_info_t)); |
| 218 |
|
| 219 |
/* Check the accelerometer revision */
|
| 220 |
info->accel_rev = read8(BNO055_ACCEL_REV_ID_ADDR); |
| 221 |
|
| 222 |
/* Check the magnetometer revision */
|
| 223 |
info->mag_rev = read8(BNO055_MAG_REV_ID_ADDR); |
| 224 |
|
| 225 |
/* Check the gyroscope revision */
|
| 226 |
info->gyro_rev = read8(BNO055_GYRO_REV_ID_ADDR); |
| 227 |
|
| 228 |
/* Check the SW revision */
|
| 229 |
info->bl_rev = read8(BNO055_BL_REV_ID_ADDR); |
| 230 |
|
| 231 |
a = read8(BNO055_SW_REV_ID_LSB_ADDR); |
| 232 |
b = read8(BNO055_SW_REV_ID_MSB_ADDR); |
| 233 |
info->sw_rev = (((uint16_t)b) << 8) | ((uint16_t)a);
|
| 234 |
} |
| 235 |
|
| 236 |
/**************************************************************************/
|
| 237 |
/*!
|
| 238 |
@brief Gets current calibration state. Each value should be a uint8_t
|
| 239 |
pointer and it will be set to 0 if not calibrated and 3 if
|
| 240 |
fully calibrated.
|
| 241 |
*/
|
| 242 |
/**************************************************************************/
|
| 243 |
void Adafruit_BNO055::getCalibration(uint8_t* sys, uint8_t* gyro, uint8_t* accel, uint8_t* mag) {
|
| 244 |
uint8_t calData = read8(BNO055_CALIB_STAT_ADDR); |
| 245 |
if (sys != NULL) { |
| 246 |
*sys = (calData >> 6) & 0x03; |
| 247 |
} |
| 248 |
if (gyro != NULL) { |
| 249 |
*gyro = (calData >> 4) & 0x03; |
| 250 |
} |
| 251 |
if (accel != NULL) { |
| 252 |
*accel = (calData >> 2) & 0x03; |
| 253 |
} |
| 254 |
if (mag != NULL) { |
| 255 |
*mag = calData & 0x03;
|
| 256 |
} |
| 257 |
} |
| 258 |
|
| 259 |
/**************************************************************************/
|
| 260 |
/*!
|
| 261 |
@brief Gets the temperature in degrees celsius
|
| 262 |
*/
|
| 263 |
/**************************************************************************/
|
| 264 |
int8_t Adafruit_BNO055::getTemp(void)
|
| 265 |
{
|
| 266 |
int8_t temp = (int8_t)(read8(BNO055_TEMP_ADDR)); |
| 267 |
return temp;
|
| 268 |
} |
| 269 |
|
| 270 |
/**************************************************************************/
|
| 271 |
/*!
|
| 272 |
@brief Gets a vector reading from the specified source
|
| 273 |
*/
|
| 274 |
/**************************************************************************/
|
| 275 |
imu::Vector<3> Adafruit_BNO055::getVector(adafruit_vector_type_t vector_type)
|
| 276 |
{
|
| 277 |
imu::Vector<3> xyz;
|
| 278 |
uint8_t buffer[6];
|
| 279 |
memset (buffer, 0, 6); |
| 280 |
|
| 281 |
int16_t x, y, z; |
| 282 |
x = y = z = 0;
|
| 283 |
|
| 284 |
/* Read vector data (6 bytes) */
|
| 285 |
readLen((adafruit_bno055_reg_t)vector_type, buffer, 6);
|
| 286 |
|
| 287 |
x = ((int16_t)buffer[0]) | (((int16_t)buffer[1]) << 8); |
| 288 |
y = ((int16_t)buffer[2]) | (((int16_t)buffer[3]) << 8); |
| 289 |
z = ((int16_t)buffer[4]) | (((int16_t)buffer[5]) << 8); |
| 290 |
|
| 291 |
/* Convert the value to an appropriate range (section 3.6.4) */
|
| 292 |
/* and assign the value to the Vector type */
|
| 293 |
switch(vector_type)
|
| 294 |
{
|
| 295 |
case VECTOR_MAGNETOMETER:
|
| 296 |
/* 1uT = 16 LSB */
|
| 297 |
xyz[0] = ((double)x)/16.0; |
| 298 |
xyz[1] = ((double)y)/16.0; |
| 299 |
xyz[2] = ((double)z)/16.0; |
| 300 |
break;
|
| 301 |
case VECTOR_GYROSCOPE:
|
| 302 |
/* 1rps = 900 LSB */
|
| 303 |
xyz[0] = ((double)x)/900.0; |
| 304 |
xyz[1] = ((double)y)/900.0; |
| 305 |
xyz[2] = ((double)z)/900.0; |
| 306 |
break;
|
| 307 |
case VECTOR_EULER:
|
| 308 |
/* 1 degree = 16 LSB */
|
| 309 |
xyz[0] = ((double)x)/16.0; |
| 310 |
xyz[1] = ((double)y)/16.0; |
| 311 |
xyz[2] = ((double)z)/16.0; |
| 312 |
break;
|
| 313 |
case VECTOR_ACCELEROMETER:
|
| 314 |
case VECTOR_LINEARACCEL:
|
| 315 |
case VECTOR_GRAVITY:
|
| 316 |
/* 1m/s^2 = 100 LSB */
|
| 317 |
xyz[0] = ((double)x)/100.0; |
| 318 |
xyz[1] = ((double)y)/100.0; |
| 319 |
xyz[2] = ((double)z)/100.0; |
| 320 |
break;
|
| 321 |
} |
| 322 |
|
| 323 |
return xyz;
|
| 324 |
} |
| 325 |
|
| 326 |
/**************************************************************************/
|
| 327 |
/*!
|
| 328 |
@brief Gets a quaternion reading from the specified source
|
| 329 |
*/
|
| 330 |
/**************************************************************************/
|
| 331 |
imu::Quaternion Adafruit_BNO055::getQuat(void)
|
| 332 |
{
|
| 333 |
uint8_t buffer[8];
|
| 334 |
memset (buffer, 0, 8); |
| 335 |
|
| 336 |
int16_t x, y, z, w; |
| 337 |
x = y = z = w = 0;
|
| 338 |
|
| 339 |
/* Read quat data (8 bytes) */
|
| 340 |
readLen(BNO055_QUATERNION_DATA_W_LSB_ADDR, buffer, 8);
|
| 341 |
w = (((uint16_t)buffer[1]) << 8) | ((uint16_t)buffer[0]); |
| 342 |
x = (((uint16_t)buffer[3]) << 8) | ((uint16_t)buffer[2]); |
| 343 |
y = (((uint16_t)buffer[5]) << 8) | ((uint16_t)buffer[4]); |
| 344 |
z = (((uint16_t)buffer[7]) << 8) | ((uint16_t)buffer[6]); |
| 345 |
|
| 346 |
/* Assign to Quaternion */
|
| 347 |
/* See http://ae-bst.resource.bosch.com/media/products/dokumente/bno055/BST_BNO055_DS000_12~1.pdf
|
| 348 |
3.6.5.5 Orientation (Quaternion) */
|
| 349 |
const double scale = (1.0 / (1<<14)); |
| 350 |
imu::Quaternion quat(scale * w, scale * x, scale * y, scale * z); |
| 351 |
return quat;
|
| 352 |
} |
| 353 |
|
| 354 |
/**************************************************************************/
|
| 355 |
/*!
|
| 356 |
@brief Provides the sensor_t data for this sensor
|
| 357 |
*/
|
| 358 |
/**************************************************************************/
|
| 359 |
void Adafruit_BNO055::getSensor(sensor_t *sensor)
|
| 360 |
{
|
| 361 |
/* Clear the sensor_t object */
|
| 362 |
memset(sensor, 0, sizeof(sensor_t)); |
| 363 |
|
| 364 |
/* Insert the sensor name in the fixed length char array */
|
| 365 |
strncpy (sensor->name, "BNO055", sizeof(sensor->name) - 1); |
| 366 |
sensor->name[sizeof(sensor->name)- 1] = 0; |
| 367 |
sensor->version = 1;
|
| 368 |
sensor->sensor_id = _sensorID; |
| 369 |
sensor->type = SENSOR_TYPE_ORIENTATION; |
| 370 |
sensor->min_delay = 0;
|
| 371 |
sensor->max_value = 0.0F; |
| 372 |
sensor->min_value = 0.0F; |
| 373 |
sensor->resolution = 0.01F; |
| 374 |
} |
| 375 |
|
| 376 |
/**************************************************************************/
|
| 377 |
/*!
|
| 378 |
@brief Reads the sensor and returns the data as a sensors_event_t
|
| 379 |
*/
|
| 380 |
/**************************************************************************/
|
| 381 |
bool Adafruit_BNO055::getEvent(sensors_event_t *event)
|
| 382 |
{
|
| 383 |
/* Clear the event */
|
| 384 |
memset(event, 0, sizeof(sensors_event_t)); |
| 385 |
|
| 386 |
event->version = sizeof(sensors_event_t);
|
| 387 |
event->sensor_id = _sensorID; |
| 388 |
event->type = SENSOR_TYPE_ORIENTATION; |
| 389 |
event->timestamp = millis(); |
| 390 |
|
| 391 |
/* Get a Euler angle sample for orientation */
|
| 392 |
imu::Vector<3> euler = getVector(Adafruit_BNO055::VECTOR_EULER);
|
| 393 |
event->orientation.x = euler.x(); |
| 394 |
event->orientation.y = euler.y(); |
| 395 |
event->orientation.z = euler.z(); |
| 396 |
|
| 397 |
return true; |
| 398 |
} |
| 399 |
|
| 400 |
/**************************************************************************/
|
| 401 |
/*!
|
| 402 |
@brief Reads the sensor's offset registers into a byte array
|
| 403 |
*/
|
| 404 |
/**************************************************************************/
|
| 405 |
bool Adafruit_BNO055::getSensorOffsets(uint8_t* calibData)
|
| 406 |
{
|
| 407 |
if (isFullyCalibrated())
|
| 408 |
{
|
| 409 |
adafruit_bno055_opmode_t lastMode = _mode; |
| 410 |
setMode(OPERATION_MODE_CONFIG); |
| 411 |
|
| 412 |
readLen(ACCEL_OFFSET_X_LSB_ADDR, calibData, NUM_BNO055_OFFSET_REGISTERS); |
| 413 |
|
| 414 |
setMode(lastMode); |
| 415 |
return true; |
| 416 |
} |
| 417 |
return false; |
| 418 |
} |
| 419 |
|
| 420 |
/**************************************************************************/
|
| 421 |
/*!
|
| 422 |
@brief Reads the sensor's offset registers into an offset struct
|
| 423 |
*/
|
| 424 |
/**************************************************************************/
|
| 425 |
bool Adafruit_BNO055::getSensorOffsets(adafruit_bno055_offsets_t &offsets_type)
|
| 426 |
{
|
| 427 |
if (isFullyCalibrated())
|
| 428 |
{
|
| 429 |
adafruit_bno055_opmode_t lastMode = _mode; |
| 430 |
setMode(OPERATION_MODE_CONFIG); |
| 431 |
delay(25);
|
| 432 |
|
| 433 |
offsets_type.accel_offset_x = (read8(ACCEL_OFFSET_X_MSB_ADDR) << 8) | (read8(ACCEL_OFFSET_X_LSB_ADDR));
|
| 434 |
offsets_type.accel_offset_y = (read8(ACCEL_OFFSET_Y_MSB_ADDR) << 8) | (read8(ACCEL_OFFSET_Y_LSB_ADDR));
|
| 435 |
offsets_type.accel_offset_z = (read8(ACCEL_OFFSET_Z_MSB_ADDR) << 8) | (read8(ACCEL_OFFSET_Z_LSB_ADDR));
|
| 436 |
|
| 437 |
offsets_type.gyro_offset_x = (read8(GYRO_OFFSET_X_MSB_ADDR) << 8) | (read8(GYRO_OFFSET_X_LSB_ADDR));
|
| 438 |
offsets_type.gyro_offset_y = (read8(GYRO_OFFSET_Y_MSB_ADDR) << 8) | (read8(GYRO_OFFSET_Y_LSB_ADDR));
|
| 439 |
offsets_type.gyro_offset_z = (read8(GYRO_OFFSET_Z_MSB_ADDR) << 8) | (read8(GYRO_OFFSET_Z_LSB_ADDR));
|
| 440 |
|
| 441 |
offsets_type.mag_offset_x = (read8(MAG_OFFSET_X_MSB_ADDR) << 8) | (read8(MAG_OFFSET_X_LSB_ADDR));
|
| 442 |
offsets_type.mag_offset_y = (read8(MAG_OFFSET_Y_MSB_ADDR) << 8) | (read8(MAG_OFFSET_Y_LSB_ADDR));
|
| 443 |
offsets_type.mag_offset_z = (read8(MAG_OFFSET_Z_MSB_ADDR) << 8) | (read8(MAG_OFFSET_Z_LSB_ADDR));
|
| 444 |
|
| 445 |
offsets_type.accel_radius = (read8(ACCEL_RADIUS_MSB_ADDR) << 8) | (read8(ACCEL_RADIUS_LSB_ADDR));
|
| 446 |
offsets_type.mag_radius = (read8(MAG_RADIUS_MSB_ADDR) << 8) | (read8(MAG_RADIUS_LSB_ADDR));
|
| 447 |
|
| 448 |
setMode(lastMode); |
| 449 |
return true; |
| 450 |
} |
| 451 |
return false; |
| 452 |
} |
| 453 |
|
| 454 |
|
| 455 |
/**************************************************************************/
|
| 456 |
/*!
|
| 457 |
@brief Writes an array of calibration values to the sensor's offset registers
|
| 458 |
*/
|
| 459 |
/**************************************************************************/
|
| 460 |
void Adafruit_BNO055::setSensorOffsets(const uint8_t* calibData) |
| 461 |
{
|
| 462 |
adafruit_bno055_opmode_t lastMode = _mode; |
| 463 |
setMode(OPERATION_MODE_CONFIG); |
| 464 |
delay(25);
|
| 465 |
|
| 466 |
/* A writeLen() would make this much cleaner */
|
| 467 |
write8(ACCEL_OFFSET_X_LSB_ADDR, calibData[0]);
|
| 468 |
write8(ACCEL_OFFSET_X_MSB_ADDR, calibData[1]);
|
| 469 |
write8(ACCEL_OFFSET_Y_LSB_ADDR, calibData[2]);
|
| 470 |
write8(ACCEL_OFFSET_Y_MSB_ADDR, calibData[3]);
|
| 471 |
write8(ACCEL_OFFSET_Z_LSB_ADDR, calibData[4]);
|
| 472 |
write8(ACCEL_OFFSET_Z_MSB_ADDR, calibData[5]);
|
| 473 |
|
| 474 |
write8(GYRO_OFFSET_X_LSB_ADDR, calibData[6]);
|
| 475 |
write8(GYRO_OFFSET_X_MSB_ADDR, calibData[7]);
|
| 476 |
write8(GYRO_OFFSET_Y_LSB_ADDR, calibData[8]);
|
| 477 |
write8(GYRO_OFFSET_Y_MSB_ADDR, calibData[9]);
|
| 478 |
write8(GYRO_OFFSET_Z_LSB_ADDR, calibData[10]);
|
| 479 |
write8(GYRO_OFFSET_Z_MSB_ADDR, calibData[11]);
|
| 480 |
|
| 481 |
write8(MAG_OFFSET_X_LSB_ADDR, calibData[12]);
|
| 482 |
write8(MAG_OFFSET_X_MSB_ADDR, calibData[13]);
|
| 483 |
write8(MAG_OFFSET_Y_LSB_ADDR, calibData[14]);
|
| 484 |
write8(MAG_OFFSET_Y_MSB_ADDR, calibData[15]);
|
| 485 |
write8(MAG_OFFSET_Z_LSB_ADDR, calibData[16]);
|
| 486 |
write8(MAG_OFFSET_Z_MSB_ADDR, calibData[17]);
|
| 487 |
|
| 488 |
write8(ACCEL_RADIUS_LSB_ADDR, calibData[18]);
|
| 489 |
write8(ACCEL_RADIUS_MSB_ADDR, calibData[19]);
|
| 490 |
|
| 491 |
write8(MAG_RADIUS_LSB_ADDR, calibData[20]);
|
| 492 |
write8(MAG_RADIUS_MSB_ADDR, calibData[21]);
|
| 493 |
|
| 494 |
setMode(lastMode); |
| 495 |
} |
| 496 |
|
| 497 |
/**************************************************************************/
|
| 498 |
/*!
|
| 499 |
@brief Writes to the sensor's offset registers from an offset struct
|
| 500 |
*/
|
| 501 |
/**************************************************************************/
|
| 502 |
void Adafruit_BNO055::setSensorOffsets(const adafruit_bno055_offsets_t &offsets_type) |
| 503 |
{
|
| 504 |
adafruit_bno055_opmode_t lastMode = _mode; |
| 505 |
setMode(OPERATION_MODE_CONFIG); |
| 506 |
delay(25);
|
| 507 |
|
| 508 |
write8(ACCEL_OFFSET_X_LSB_ADDR, (offsets_type.accel_offset_x) & 0x0FF);
|
| 509 |
write8(ACCEL_OFFSET_X_MSB_ADDR, (offsets_type.accel_offset_x >> 8) & 0x0FF); |
| 510 |
write8(ACCEL_OFFSET_Y_LSB_ADDR, (offsets_type.accel_offset_y) & 0x0FF);
|
| 511 |
write8(ACCEL_OFFSET_Y_MSB_ADDR, (offsets_type.accel_offset_y >> 8) & 0x0FF); |
| 512 |
write8(ACCEL_OFFSET_Z_LSB_ADDR, (offsets_type.accel_offset_z) & 0x0FF);
|
| 513 |
write8(ACCEL_OFFSET_Z_MSB_ADDR, (offsets_type.accel_offset_z >> 8) & 0x0FF); |
| 514 |
|
| 515 |
write8(GYRO_OFFSET_X_LSB_ADDR, (offsets_type.gyro_offset_x) & 0x0FF);
|
| 516 |
write8(GYRO_OFFSET_X_MSB_ADDR, (offsets_type.gyro_offset_x >> 8) & 0x0FF); |
| 517 |
write8(GYRO_OFFSET_Y_LSB_ADDR, (offsets_type.gyro_offset_y) & 0x0FF);
|
| 518 |
write8(GYRO_OFFSET_Y_MSB_ADDR, (offsets_type.gyro_offset_y >> 8) & 0x0FF); |
| 519 |
write8(GYRO_OFFSET_Z_LSB_ADDR, (offsets_type.gyro_offset_z) & 0x0FF);
|
| 520 |
write8(GYRO_OFFSET_Z_MSB_ADDR, (offsets_type.gyro_offset_z >> 8) & 0x0FF); |
| 521 |
|
| 522 |
write8(MAG_OFFSET_X_LSB_ADDR, (offsets_type.mag_offset_x) & 0x0FF);
|
| 523 |
write8(MAG_OFFSET_X_MSB_ADDR, (offsets_type.mag_offset_x >> 8) & 0x0FF); |
| 524 |
write8(MAG_OFFSET_Y_LSB_ADDR, (offsets_type.mag_offset_y) & 0x0FF);
|
| 525 |
write8(MAG_OFFSET_Y_MSB_ADDR, (offsets_type.mag_offset_y >> 8) & 0x0FF); |
| 526 |
write8(MAG_OFFSET_Z_LSB_ADDR, (offsets_type.mag_offset_z) & 0x0FF);
|
| 527 |
write8(MAG_OFFSET_Z_MSB_ADDR, (offsets_type.mag_offset_z >> 8) & 0x0FF); |
| 528 |
|
| 529 |
write8(ACCEL_RADIUS_LSB_ADDR, (offsets_type.accel_radius) & 0x0FF);
|
| 530 |
write8(ACCEL_RADIUS_MSB_ADDR, (offsets_type.accel_radius >> 8) & 0x0FF); |
| 531 |
|
| 532 |
write8(MAG_RADIUS_LSB_ADDR, (offsets_type.mag_radius) & 0x0FF);
|
| 533 |
write8(MAG_RADIUS_MSB_ADDR, (offsets_type.mag_radius >> 8) & 0x0FF); |
| 534 |
|
| 535 |
setMode(lastMode); |
| 536 |
} |
| 537 |
|
| 538 |
bool Adafruit_BNO055::isFullyCalibrated(void) |
| 539 |
{
|
| 540 |
uint8_t system, gyro, accel, mag; |
| 541 |
getCalibration(&system, &gyro, &accel, &mag); |
| 542 |
if (system < 3 || gyro < 3 || accel < 3 || mag < 3) |
| 543 |
return false; |
| 544 |
return true; |
| 545 |
} |
| 546 |
|
| 547 |
|
| 548 |
/***************************************************************************
|
| 549 |
PRIVATE FUNCTIONS
|
| 550 |
***************************************************************************/
|
| 551 |
|
| 552 |
/**************************************************************************/
|
| 553 |
/*!
|
| 554 |
@brief Writes an 8 bit value over I2C
|
| 555 |
*/
|
| 556 |
/**************************************************************************/
|
| 557 |
bool Adafruit_BNO055::write8(adafruit_bno055_reg_t reg, byte value)
|
| 558 |
{
|
| 559 |
Wire.beginTransmission(_address); |
| 560 |
#if ARDUINO >= 100 |
| 561 |
Wire.write((uint8_t)reg); |
| 562 |
Wire.write((uint8_t)value); |
| 563 |
#else
|
| 564 |
Wire.send(reg); |
| 565 |
Wire.send(value); |
| 566 |
#endif
|
| 567 |
Wire.endTransmission(); |
| 568 |
|
| 569 |
/* ToDo: Check for error! */
|
| 570 |
return true; |
| 571 |
} |
| 572 |
|
| 573 |
/**************************************************************************/
|
| 574 |
/*!
|
| 575 |
@brief Reads an 8 bit value over I2C
|
| 576 |
*/
|
| 577 |
/**************************************************************************/
|
| 578 |
byte Adafruit_BNO055::read8(adafruit_bno055_reg_t reg ) |
| 579 |
{
|
| 580 |
byte value = 0;
|
| 581 |
|
| 582 |
Wire.beginTransmission(_address); |
| 583 |
#if ARDUINO >= 100 |
| 584 |
Wire.write((uint8_t)reg); |
| 585 |
#else
|
| 586 |
Wire.send(reg); |
| 587 |
#endif
|
| 588 |
Wire.endTransmission(); |
| 589 |
Wire.requestFrom(_address, (byte)1);
|
| 590 |
#if ARDUINO >= 100 |
| 591 |
value = Wire.read(); |
| 592 |
#else
|
| 593 |
value = Wire.receive(); |
| 594 |
#endif
|
| 595 |
|
| 596 |
return value;
|
| 597 |
} |
| 598 |
|
| 599 |
/**************************************************************************/
|
| 600 |
/*!
|
| 601 |
@brief Reads the specified number of bytes over I2C
|
| 602 |
*/
|
| 603 |
/**************************************************************************/
|
| 604 |
bool Adafruit_BNO055::readLen(adafruit_bno055_reg_t reg, byte * buffer, uint8_t len)
|
| 605 |
{
|
| 606 |
Wire.beginTransmission(_address); |
| 607 |
#if ARDUINO >= 100 |
| 608 |
Wire.write((uint8_t)reg); |
| 609 |
#else
|
| 610 |
Wire.send(reg); |
| 611 |
#endif
|
| 612 |
Wire.endTransmission(); |
| 613 |
Wire.requestFrom(_address, (byte)len); |
| 614 |
|
| 615 |
for (uint8_t i = 0; i < len; i++) |
| 616 |
{
|
| 617 |
#if ARDUINO >= 100 |
| 618 |
buffer[i] = Wire.read(); |
| 619 |
#else
|
| 620 |
buffer[i] = Wire.receive(); |
| 621 |
#endif
|
| 622 |
} |
| 623 |
|
| 624 |
/* ToDo: Check for errors! */
|
| 625 |
return true; |
| 626 |
} |