amiro-blt / Target / Modules / LightRing_1-0 / Boot / lib / STM32F10x_StdPeriph_Driver / src / stm32f10x_flash.c @ 367c0652
History | View | Annotate | Download (61.1 KB)
| 1 |
/**
|
|---|---|
| 2 |
******************************************************************************
|
| 3 |
* @file stm32f10x_flash.c
|
| 4 |
* @author MCD Application Team
|
| 5 |
* @version V3.5.0
|
| 6 |
* @date 11-March-2011
|
| 7 |
* @brief This file provides all the FLASH firmware functions.
|
| 8 |
******************************************************************************
|
| 9 |
* @attention
|
| 10 |
*
|
| 11 |
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
| 12 |
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
| 13 |
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
|
| 14 |
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
| 15 |
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
| 16 |
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
| 17 |
*
|
| 18 |
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
|
| 19 |
******************************************************************************
|
| 20 |
*/
|
| 21 |
|
| 22 |
/* Includes ------------------------------------------------------------------*/
|
| 23 |
#include "stm32f10x_flash.h" |
| 24 |
|
| 25 |
/** @addtogroup STM32F10x_StdPeriph_Driver
|
| 26 |
* @{
|
| 27 |
*/
|
| 28 |
|
| 29 |
/** @defgroup FLASH
|
| 30 |
* @brief FLASH driver modules
|
| 31 |
* @{
|
| 32 |
*/
|
| 33 |
|
| 34 |
/** @defgroup FLASH_Private_TypesDefinitions
|
| 35 |
* @{
|
| 36 |
*/
|
| 37 |
|
| 38 |
/**
|
| 39 |
* @}
|
| 40 |
*/
|
| 41 |
|
| 42 |
/** @defgroup FLASH_Private_Defines
|
| 43 |
* @{
|
| 44 |
*/
|
| 45 |
|
| 46 |
/* Flash Access Control Register bits */
|
| 47 |
#define ACR_LATENCY_Mask ((uint32_t)0x00000038) |
| 48 |
#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7) |
| 49 |
#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF) |
| 50 |
|
| 51 |
/* Flash Access Control Register bits */
|
| 52 |
#define ACR_PRFTBS_Mask ((uint32_t)0x00000020) |
| 53 |
|
| 54 |
/* Flash Control Register bits */
|
| 55 |
#define CR_PG_Set ((uint32_t)0x00000001) |
| 56 |
#define CR_PG_Reset ((uint32_t)0x00001FFE) |
| 57 |
#define CR_PER_Set ((uint32_t)0x00000002) |
| 58 |
#define CR_PER_Reset ((uint32_t)0x00001FFD) |
| 59 |
#define CR_MER_Set ((uint32_t)0x00000004) |
| 60 |
#define CR_MER_Reset ((uint32_t)0x00001FFB) |
| 61 |
#define CR_OPTPG_Set ((uint32_t)0x00000010) |
| 62 |
#define CR_OPTPG_Reset ((uint32_t)0x00001FEF) |
| 63 |
#define CR_OPTER_Set ((uint32_t)0x00000020) |
| 64 |
#define CR_OPTER_Reset ((uint32_t)0x00001FDF) |
| 65 |
#define CR_STRT_Set ((uint32_t)0x00000040) |
| 66 |
#define CR_LOCK_Set ((uint32_t)0x00000080) |
| 67 |
|
| 68 |
/* FLASH Mask */
|
| 69 |
#define RDPRT_Mask ((uint32_t)0x00000002) |
| 70 |
#define WRP0_Mask ((uint32_t)0x000000FF) |
| 71 |
#define WRP1_Mask ((uint32_t)0x0000FF00) |
| 72 |
#define WRP2_Mask ((uint32_t)0x00FF0000) |
| 73 |
#define WRP3_Mask ((uint32_t)0xFF000000) |
| 74 |
#define OB_USER_BFB2 ((uint16_t)0x0008) |
| 75 |
|
| 76 |
/* FLASH Keys */
|
| 77 |
#define RDP_Key ((uint16_t)0x00A5) |
| 78 |
#define FLASH_KEY1 ((uint32_t)0x45670123) |
| 79 |
#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) |
| 80 |
|
| 81 |
/* FLASH BANK address */
|
| 82 |
#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF) |
| 83 |
|
| 84 |
/* Delay definition */
|
| 85 |
#define EraseTimeout ((uint32_t)0x000B0000) |
| 86 |
#define ProgramTimeout ((uint32_t)0x00002000) |
| 87 |
/**
|
| 88 |
* @}
|
| 89 |
*/
|
| 90 |
|
| 91 |
/** @defgroup FLASH_Private_Macros
|
| 92 |
* @{
|
| 93 |
*/
|
| 94 |
|
| 95 |
/**
|
| 96 |
* @}
|
| 97 |
*/
|
| 98 |
|
| 99 |
/** @defgroup FLASH_Private_Variables
|
| 100 |
* @{
|
| 101 |
*/
|
| 102 |
|
| 103 |
/**
|
| 104 |
* @}
|
| 105 |
*/
|
| 106 |
|
| 107 |
/** @defgroup FLASH_Private_FunctionPrototypes
|
| 108 |
* @{
|
| 109 |
*/
|
| 110 |
|
| 111 |
/**
|
| 112 |
* @}
|
| 113 |
*/
|
| 114 |
|
| 115 |
/** @defgroup FLASH_Private_Functions
|
| 116 |
* @{
|
| 117 |
*/
|
| 118 |
|
| 119 |
/**
|
| 120 |
@code
|
| 121 |
|
| 122 |
This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
|
| 123 |
including the latest STM32F10x_XL density devices.
|
| 124 |
|
| 125 |
STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
|
| 126 |
- bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
|
| 127 |
- bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
|
| 128 |
While other STM32F10x devices features only one bank with memory up to 512 Kbytes.
|
| 129 |
|
| 130 |
In version V3.3.0, some functions were updated and new ones were added to support
|
| 131 |
STM32F10x_XL devices. Thus some functions manages all devices, while other are
|
| 132 |
dedicated for XL devices only.
|
| 133 |
|
| 134 |
The table below presents the list of available functions depending on the used STM32F10x devices.
|
| 135 |
|
| 136 |
***************************************************
|
| 137 |
* Legacy functions used for all STM32F10x devices *
|
| 138 |
***************************************************
|
| 139 |
+----------------------------------------------------------------------------------------------------------------------------------+
|
| 140 |
| Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
|
| 141 |
| | devices | devices | |
|
| 142 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 143 |
|FLASH_SetLatency | Yes | Yes | No change |
|
| 144 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 145 |
|FLASH_HalfCycleAccessCmd | Yes | Yes | No change |
|
| 146 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 147 |
|FLASH_PrefetchBufferCmd | Yes | Yes | No change |
|
| 148 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 149 |
|FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. |
|
| 150 |
| | | | - For other devices: unlock Bank1 and it is equivalent |
|
| 151 |
| | | | to FLASH_UnlockBank1 function. |
|
| 152 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 153 |
|FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. |
|
| 154 |
| | | | - For other devices: lock Bank1 and it is equivalent |
|
| 155 |
| | | | to FLASH_LockBank1 function. |
|
| 156 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 157 |
|FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 |
|
| 158 |
| | | | - For other devices: erase a page in Bank1 |
|
| 159 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 160 |
|FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
|
| 161 |
| | | | - For other devices: erase all pages in Bank1 |
|
| 162 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 163 |
|FLASH_EraseOptionBytes | Yes | Yes | No change |
|
| 164 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 165 |
|FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
|
| 166 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 167 |
|FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
|
| 168 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 169 |
|FLASH_ProgramOptionByteData | Yes | Yes | No change |
|
| 170 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 171 |
|FLASH_EnableWriteProtection | Yes | Yes | No change |
|
| 172 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 173 |
|FLASH_ReadOutProtection | Yes | Yes | No change |
|
| 174 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 175 |
|FLASH_UserOptionByteConfig | Yes | Yes | No change |
|
| 176 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 177 |
|FLASH_GetUserOptionByte | Yes | Yes | No change |
|
| 178 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 179 |
|FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change |
|
| 180 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 181 |
|FLASH_GetReadOutProtectionStatus | Yes | Yes | No change |
|
| 182 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 183 |
|FLASH_GetPrefetchBufferStatus | Yes | Yes | No change |
|
| 184 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 185 |
|FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
|
| 186 |
| | | | - For other devices: enable Bank1's interrupts |
|
| 187 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 188 |
|FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
|
| 189 |
| | | | - For other devices: return Bank1's flag status |
|
| 190 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 191 |
|FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag |
|
| 192 |
| | | | - For other devices: clear Bank1's flag |
|
| 193 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 194 |
|FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) |
|
| 195 |
| | | | equivalent to FLASH_GetBank1Status function |
|
| 196 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 197 |
|FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) |
|
| 198 |
| | | | equivalent to: FLASH_WaitForLastBank1Operation function |
|
| 199 |
+----------------------------------------------------------------------------------------------------------------------------------+
|
| 200 |
|
| 201 |
************************************************************************************************************************
|
| 202 |
* New functions used for all STM32F10x devices to manage Bank1: *
|
| 203 |
* - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
|
| 204 |
* - For other devices, these functions are optional (covered by functions listed above) *
|
| 205 |
************************************************************************************************************************
|
| 206 |
+----------------------------------------------------------------------------------------------------------------------------------+
|
| 207 |
| Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
|
| 208 |
| | devices | devices | |
|
| 209 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 210 |
| FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 |
|
| 211 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 212 |
|FLASH_LockBank1 | Yes | Yes | - Lock Bank1 |
|
| 213 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 214 |
| FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 |
|
| 215 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 216 |
| FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 |
|
| 217 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 218 |
| FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation |
|
| 219 |
+----------------------------------------------------------------------------------------------------------------------------------+
|
| 220 |
|
| 221 |
*****************************************************************************
|
| 222 |
* New Functions used only with STM32F10x_XL density devices to manage Bank2 *
|
| 223 |
*****************************************************************************
|
| 224 |
+----------------------------------------------------------------------------------------------------------------------------------+
|
| 225 |
| Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
|
| 226 |
| | devices | devices | |
|
| 227 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 228 |
| FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 |
|
| 229 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 230 |
|FLASH_LockBank2 | Yes | No | - Lock Bank2 |
|
| 231 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 232 |
| FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 |
|
| 233 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 234 |
| FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 |
|
| 235 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 236 |
| FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation |
|
| 237 |
|----------------------------------------------------------------------------------------------------------------------------------|
|
| 238 |
| FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 |
|
| 239 |
+----------------------------------------------------------------------------------------------------------------------------------+
|
| 240 |
@endcode
|
| 241 |
*/
|
| 242 |
|
| 243 |
|
| 244 |
/**
|
| 245 |
* @brief Sets the code latency value.
|
| 246 |
* @note This function can be used for all STM32F10x devices.
|
| 247 |
* @param FLASH_Latency: specifies the FLASH Latency value.
|
| 248 |
* This parameter can be one of the following values:
|
| 249 |
* @arg FLASH_Latency_0: FLASH Zero Latency cycle
|
| 250 |
* @arg FLASH_Latency_1: FLASH One Latency cycle
|
| 251 |
* @arg FLASH_Latency_2: FLASH Two Latency cycles
|
| 252 |
* @retval None
|
| 253 |
*/
|
| 254 |
void FLASH_SetLatency(uint32_t FLASH_Latency)
|
| 255 |
{
|
| 256 |
uint32_t tmpreg = 0;
|
| 257 |
|
| 258 |
/* Check the parameters */
|
| 259 |
assert_param(IS_FLASH_LATENCY(FLASH_Latency)); |
| 260 |
|
| 261 |
/* Read the ACR register */
|
| 262 |
tmpreg = FLASH->ACR; |
| 263 |
|
| 264 |
/* Sets the Latency value */
|
| 265 |
tmpreg &= ACR_LATENCY_Mask; |
| 266 |
tmpreg |= FLASH_Latency; |
| 267 |
|
| 268 |
/* Write the ACR register */
|
| 269 |
FLASH->ACR = tmpreg; |
| 270 |
} |
| 271 |
|
| 272 |
/**
|
| 273 |
* @brief Enables or disables the Half cycle flash access.
|
| 274 |
* @note This function can be used for all STM32F10x devices.
|
| 275 |
* @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
|
| 276 |
* This parameter can be one of the following values:
|
| 277 |
* @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
|
| 278 |
* @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
|
| 279 |
* @retval None
|
| 280 |
*/
|
| 281 |
void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
|
| 282 |
{
|
| 283 |
/* Check the parameters */
|
| 284 |
assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); |
| 285 |
|
| 286 |
/* Enable or disable the Half cycle access */
|
| 287 |
FLASH->ACR &= ACR_HLFCYA_Mask; |
| 288 |
FLASH->ACR |= FLASH_HalfCycleAccess; |
| 289 |
} |
| 290 |
|
| 291 |
/**
|
| 292 |
* @brief Enables or disables the Prefetch Buffer.
|
| 293 |
* @note This function can be used for all STM32F10x devices.
|
| 294 |
* @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
|
| 295 |
* This parameter can be one of the following values:
|
| 296 |
* @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
|
| 297 |
* @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
|
| 298 |
* @retval None
|
| 299 |
*/
|
| 300 |
void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
|
| 301 |
{
|
| 302 |
/* Check the parameters */
|
| 303 |
assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); |
| 304 |
|
| 305 |
/* Enable or disable the Prefetch Buffer */
|
| 306 |
FLASH->ACR &= ACR_PRFTBE_Mask; |
| 307 |
FLASH->ACR |= FLASH_PrefetchBuffer; |
| 308 |
} |
| 309 |
|
| 310 |
/**
|
| 311 |
* @brief Unlocks the FLASH Program Erase Controller.
|
| 312 |
* @note This function can be used for all STM32F10x devices.
|
| 313 |
* - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
|
| 314 |
* - For all other devices it unlocks Bank1 and it is equivalent
|
| 315 |
* to FLASH_UnlockBank1 function..
|
| 316 |
* @param None
|
| 317 |
* @retval None
|
| 318 |
*/
|
| 319 |
void FLASH_Unlock(void) |
| 320 |
{
|
| 321 |
/* Authorize the FPEC of Bank1 Access */
|
| 322 |
FLASH->KEYR = FLASH_KEY1; |
| 323 |
FLASH->KEYR = FLASH_KEY2; |
| 324 |
|
| 325 |
#ifdef STM32F10X_XL
|
| 326 |
/* Authorize the FPEC of Bank2 Access */
|
| 327 |
FLASH->KEYR2 = FLASH_KEY1; |
| 328 |
FLASH->KEYR2 = FLASH_KEY2; |
| 329 |
#endif /* STM32F10X_XL */ |
| 330 |
} |
| 331 |
/**
|
| 332 |
* @brief Unlocks the FLASH Bank1 Program Erase Controller.
|
| 333 |
* @note This function can be used for all STM32F10x devices.
|
| 334 |
* - For STM32F10X_XL devices this function unlocks Bank1.
|
| 335 |
* - For all other devices it unlocks Bank1 and it is
|
| 336 |
* equivalent to FLASH_Unlock function.
|
| 337 |
* @param None
|
| 338 |
* @retval None
|
| 339 |
*/
|
| 340 |
void FLASH_UnlockBank1(void) |
| 341 |
{
|
| 342 |
/* Authorize the FPEC of Bank1 Access */
|
| 343 |
FLASH->KEYR = FLASH_KEY1; |
| 344 |
FLASH->KEYR = FLASH_KEY2; |
| 345 |
} |
| 346 |
|
| 347 |
#ifdef STM32F10X_XL
|
| 348 |
/**
|
| 349 |
* @brief Unlocks the FLASH Bank2 Program Erase Controller.
|
| 350 |
* @note This function can be used only for STM32F10X_XL density devices.
|
| 351 |
* @param None
|
| 352 |
* @retval None
|
| 353 |
*/
|
| 354 |
void FLASH_UnlockBank2(void) |
| 355 |
{
|
| 356 |
/* Authorize the FPEC of Bank2 Access */
|
| 357 |
FLASH->KEYR2 = FLASH_KEY1; |
| 358 |
FLASH->KEYR2 = FLASH_KEY2; |
| 359 |
|
| 360 |
} |
| 361 |
#endif /* STM32F10X_XL */ |
| 362 |
|
| 363 |
/**
|
| 364 |
* @brief Locks the FLASH Program Erase Controller.
|
| 365 |
* @note This function can be used for all STM32F10x devices.
|
| 366 |
* - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
|
| 367 |
* - For all other devices it Locks Bank1 and it is equivalent
|
| 368 |
* to FLASH_LockBank1 function.
|
| 369 |
* @param None
|
| 370 |
* @retval None
|
| 371 |
*/
|
| 372 |
void FLASH_Lock(void) |
| 373 |
{
|
| 374 |
/* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
|
| 375 |
FLASH->CR |= CR_LOCK_Set; |
| 376 |
|
| 377 |
#ifdef STM32F10X_XL
|
| 378 |
/* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
|
| 379 |
FLASH->CR2 |= CR_LOCK_Set; |
| 380 |
#endif /* STM32F10X_XL */ |
| 381 |
} |
| 382 |
|
| 383 |
/**
|
| 384 |
* @brief Locks the FLASH Bank1 Program Erase Controller.
|
| 385 |
* @note this function can be used for all STM32F10x devices.
|
| 386 |
* - For STM32F10X_XL devices this function Locks Bank1.
|
| 387 |
* - For all other devices it Locks Bank1 and it is equivalent
|
| 388 |
* to FLASH_Lock function.
|
| 389 |
* @param None
|
| 390 |
* @retval None
|
| 391 |
*/
|
| 392 |
void FLASH_LockBank1(void) |
| 393 |
{
|
| 394 |
/* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
|
| 395 |
FLASH->CR |= CR_LOCK_Set; |
| 396 |
} |
| 397 |
|
| 398 |
#ifdef STM32F10X_XL
|
| 399 |
/**
|
| 400 |
* @brief Locks the FLASH Bank2 Program Erase Controller.
|
| 401 |
* @note This function can be used only for STM32F10X_XL density devices.
|
| 402 |
* @param None
|
| 403 |
* @retval None
|
| 404 |
*/
|
| 405 |
void FLASH_LockBank2(void) |
| 406 |
{
|
| 407 |
/* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
|
| 408 |
FLASH->CR2 |= CR_LOCK_Set; |
| 409 |
} |
| 410 |
#endif /* STM32F10X_XL */ |
| 411 |
|
| 412 |
/**
|
| 413 |
* @brief Erases a specified FLASH page.
|
| 414 |
* @note This function can be used for all STM32F10x devices.
|
| 415 |
* @param Page_Address: The page address to be erased.
|
| 416 |
* @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
|
| 417 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 418 |
*/
|
| 419 |
FLASH_Status FLASH_ErasePage(uint32_t Page_Address) |
| 420 |
{
|
| 421 |
FLASH_Status status = FLASH_COMPLETE; |
| 422 |
/* Check the parameters */
|
| 423 |
assert_param(IS_FLASH_ADDRESS(Page_Address)); |
| 424 |
|
| 425 |
#ifdef STM32F10X_XL
|
| 426 |
if(Page_Address < FLASH_BANK1_END_ADDRESS)
|
| 427 |
{
|
| 428 |
/* Wait for last operation to be completed */
|
| 429 |
status = FLASH_WaitForLastBank1Operation(EraseTimeout); |
| 430 |
if(status == FLASH_COMPLETE)
|
| 431 |
{
|
| 432 |
/* if the previous operation is completed, proceed to erase the page */
|
| 433 |
FLASH->CR|= CR_PER_Set; |
| 434 |
FLASH->AR = Page_Address; |
| 435 |
FLASH->CR|= CR_STRT_Set; |
| 436 |
|
| 437 |
/* Wait for last operation to be completed */
|
| 438 |
status = FLASH_WaitForLastBank1Operation(EraseTimeout); |
| 439 |
|
| 440 |
/* Disable the PER Bit */
|
| 441 |
FLASH->CR &= CR_PER_Reset; |
| 442 |
} |
| 443 |
} |
| 444 |
else
|
| 445 |
{
|
| 446 |
/* Wait for last operation to be completed */
|
| 447 |
status = FLASH_WaitForLastBank2Operation(EraseTimeout); |
| 448 |
if(status == FLASH_COMPLETE)
|
| 449 |
{
|
| 450 |
/* if the previous operation is completed, proceed to erase the page */
|
| 451 |
FLASH->CR2|= CR_PER_Set; |
| 452 |
FLASH->AR2 = Page_Address; |
| 453 |
FLASH->CR2|= CR_STRT_Set; |
| 454 |
|
| 455 |
/* Wait for last operation to be completed */
|
| 456 |
status = FLASH_WaitForLastBank2Operation(EraseTimeout); |
| 457 |
|
| 458 |
/* Disable the PER Bit */
|
| 459 |
FLASH->CR2 &= CR_PER_Reset; |
| 460 |
} |
| 461 |
} |
| 462 |
#else
|
| 463 |
/* Wait for last operation to be completed */
|
| 464 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 465 |
|
| 466 |
if(status == FLASH_COMPLETE)
|
| 467 |
{
|
| 468 |
/* if the previous operation is completed, proceed to erase the page */
|
| 469 |
FLASH->CR|= CR_PER_Set; |
| 470 |
FLASH->AR = Page_Address; |
| 471 |
FLASH->CR|= CR_STRT_Set; |
| 472 |
|
| 473 |
/* Wait for last operation to be completed */
|
| 474 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 475 |
|
| 476 |
/* Disable the PER Bit */
|
| 477 |
FLASH->CR &= CR_PER_Reset; |
| 478 |
} |
| 479 |
#endif /* STM32F10X_XL */ |
| 480 |
|
| 481 |
/* Return the Erase Status */
|
| 482 |
return status;
|
| 483 |
} |
| 484 |
|
| 485 |
/**
|
| 486 |
* @brief Erases all FLASH pages.
|
| 487 |
* @note This function can be used for all STM32F10x devices.
|
| 488 |
* @param None
|
| 489 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 490 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 491 |
*/
|
| 492 |
FLASH_Status FLASH_EraseAllPages(void)
|
| 493 |
{
|
| 494 |
FLASH_Status status = FLASH_COMPLETE; |
| 495 |
|
| 496 |
#ifdef STM32F10X_XL
|
| 497 |
/* Wait for last operation to be completed */
|
| 498 |
status = FLASH_WaitForLastBank1Operation(EraseTimeout); |
| 499 |
|
| 500 |
if(status == FLASH_COMPLETE)
|
| 501 |
{
|
| 502 |
/* if the previous operation is completed, proceed to erase all pages */
|
| 503 |
FLASH->CR |= CR_MER_Set; |
| 504 |
FLASH->CR |= CR_STRT_Set; |
| 505 |
|
| 506 |
/* Wait for last operation to be completed */
|
| 507 |
status = FLASH_WaitForLastBank1Operation(EraseTimeout); |
| 508 |
|
| 509 |
/* Disable the MER Bit */
|
| 510 |
FLASH->CR &= CR_MER_Reset; |
| 511 |
} |
| 512 |
if(status == FLASH_COMPLETE)
|
| 513 |
{
|
| 514 |
/* if the previous operation is completed, proceed to erase all pages */
|
| 515 |
FLASH->CR2 |= CR_MER_Set; |
| 516 |
FLASH->CR2 |= CR_STRT_Set; |
| 517 |
|
| 518 |
/* Wait for last operation to be completed */
|
| 519 |
status = FLASH_WaitForLastBank2Operation(EraseTimeout); |
| 520 |
|
| 521 |
/* Disable the MER Bit */
|
| 522 |
FLASH->CR2 &= CR_MER_Reset; |
| 523 |
} |
| 524 |
#else
|
| 525 |
/* Wait for last operation to be completed */
|
| 526 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 527 |
if(status == FLASH_COMPLETE)
|
| 528 |
{
|
| 529 |
/* if the previous operation is completed, proceed to erase all pages */
|
| 530 |
FLASH->CR |= CR_MER_Set; |
| 531 |
FLASH->CR |= CR_STRT_Set; |
| 532 |
|
| 533 |
/* Wait for last operation to be completed */
|
| 534 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 535 |
|
| 536 |
/* Disable the MER Bit */
|
| 537 |
FLASH->CR &= CR_MER_Reset; |
| 538 |
} |
| 539 |
#endif /* STM32F10X_XL */ |
| 540 |
|
| 541 |
/* Return the Erase Status */
|
| 542 |
return status;
|
| 543 |
} |
| 544 |
|
| 545 |
/**
|
| 546 |
* @brief Erases all Bank1 FLASH pages.
|
| 547 |
* @note This function can be used for all STM32F10x devices.
|
| 548 |
* - For STM32F10X_XL devices this function erases all Bank1 pages.
|
| 549 |
* - For all other devices it erases all Bank1 pages and it is equivalent
|
| 550 |
* to FLASH_EraseAllPages function.
|
| 551 |
* @param None
|
| 552 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 553 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 554 |
*/
|
| 555 |
FLASH_Status FLASH_EraseAllBank1Pages(void)
|
| 556 |
{
|
| 557 |
FLASH_Status status = FLASH_COMPLETE; |
| 558 |
/* Wait for last operation to be completed */
|
| 559 |
status = FLASH_WaitForLastBank1Operation(EraseTimeout); |
| 560 |
|
| 561 |
if(status == FLASH_COMPLETE)
|
| 562 |
{
|
| 563 |
/* if the previous operation is completed, proceed to erase all pages */
|
| 564 |
FLASH->CR |= CR_MER_Set; |
| 565 |
FLASH->CR |= CR_STRT_Set; |
| 566 |
|
| 567 |
/* Wait for last operation to be completed */
|
| 568 |
status = FLASH_WaitForLastBank1Operation(EraseTimeout); |
| 569 |
|
| 570 |
/* Disable the MER Bit */
|
| 571 |
FLASH->CR &= CR_MER_Reset; |
| 572 |
} |
| 573 |
/* Return the Erase Status */
|
| 574 |
return status;
|
| 575 |
} |
| 576 |
|
| 577 |
#ifdef STM32F10X_XL
|
| 578 |
/**
|
| 579 |
* @brief Erases all Bank2 FLASH pages.
|
| 580 |
* @note This function can be used only for STM32F10x_XL density devices.
|
| 581 |
* @param None
|
| 582 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 583 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 584 |
*/
|
| 585 |
FLASH_Status FLASH_EraseAllBank2Pages(void)
|
| 586 |
{
|
| 587 |
FLASH_Status status = FLASH_COMPLETE; |
| 588 |
/* Wait for last operation to be completed */
|
| 589 |
status = FLASH_WaitForLastBank2Operation(EraseTimeout); |
| 590 |
|
| 591 |
if(status == FLASH_COMPLETE)
|
| 592 |
{
|
| 593 |
/* if the previous operation is completed, proceed to erase all pages */
|
| 594 |
FLASH->CR2 |= CR_MER_Set; |
| 595 |
FLASH->CR2 |= CR_STRT_Set; |
| 596 |
|
| 597 |
/* Wait for last operation to be completed */
|
| 598 |
status = FLASH_WaitForLastBank2Operation(EraseTimeout); |
| 599 |
|
| 600 |
/* Disable the MER Bit */
|
| 601 |
FLASH->CR2 &= CR_MER_Reset; |
| 602 |
} |
| 603 |
/* Return the Erase Status */
|
| 604 |
return status;
|
| 605 |
} |
| 606 |
#endif /* STM32F10X_XL */ |
| 607 |
|
| 608 |
/**
|
| 609 |
* @brief Erases the FLASH option bytes.
|
| 610 |
* @note This functions erases all option bytes except the Read protection (RDP).
|
| 611 |
* @note This function can be used for all STM32F10x devices.
|
| 612 |
* @param None
|
| 613 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 614 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 615 |
*/
|
| 616 |
FLASH_Status FLASH_EraseOptionBytes(void)
|
| 617 |
{
|
| 618 |
uint16_t rdptmp = RDP_Key; |
| 619 |
|
| 620 |
FLASH_Status status = FLASH_COMPLETE; |
| 621 |
|
| 622 |
/* Get the actual read protection Option Byte value */
|
| 623 |
if(FLASH_GetReadOutProtectionStatus() != RESET)
|
| 624 |
{
|
| 625 |
rdptmp = 0x00;
|
| 626 |
} |
| 627 |
|
| 628 |
/* Wait for last operation to be completed */
|
| 629 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 630 |
if(status == FLASH_COMPLETE)
|
| 631 |
{
|
| 632 |
/* Authorize the small information block programming */
|
| 633 |
FLASH->OPTKEYR = FLASH_KEY1; |
| 634 |
FLASH->OPTKEYR = FLASH_KEY2; |
| 635 |
|
| 636 |
/* if the previous operation is completed, proceed to erase the option bytes */
|
| 637 |
FLASH->CR |= CR_OPTER_Set; |
| 638 |
FLASH->CR |= CR_STRT_Set; |
| 639 |
/* Wait for last operation to be completed */
|
| 640 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 641 |
|
| 642 |
if(status == FLASH_COMPLETE)
|
| 643 |
{
|
| 644 |
/* if the erase operation is completed, disable the OPTER Bit */
|
| 645 |
FLASH->CR &= CR_OPTER_Reset; |
| 646 |
|
| 647 |
/* Enable the Option Bytes Programming operation */
|
| 648 |
FLASH->CR |= CR_OPTPG_Set; |
| 649 |
/* Restore the last read protection Option Byte value */
|
| 650 |
OB->RDP = (uint16_t)rdptmp; |
| 651 |
/* Wait for last operation to be completed */
|
| 652 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 653 |
|
| 654 |
if(status != FLASH_TIMEOUT)
|
| 655 |
{
|
| 656 |
/* if the program operation is completed, disable the OPTPG Bit */
|
| 657 |
FLASH->CR &= CR_OPTPG_Reset; |
| 658 |
} |
| 659 |
} |
| 660 |
else
|
| 661 |
{
|
| 662 |
if (status != FLASH_TIMEOUT)
|
| 663 |
{
|
| 664 |
/* Disable the OPTPG Bit */
|
| 665 |
FLASH->CR &= CR_OPTPG_Reset; |
| 666 |
} |
| 667 |
} |
| 668 |
} |
| 669 |
/* Return the erase status */
|
| 670 |
return status;
|
| 671 |
} |
| 672 |
|
| 673 |
/**
|
| 674 |
* @brief Programs a word at a specified address.
|
| 675 |
* @note This function can be used for all STM32F10x devices.
|
| 676 |
* @param Address: specifies the address to be programmed.
|
| 677 |
* @param Data: specifies the data to be programmed.
|
| 678 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 679 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 680 |
*/
|
| 681 |
FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) |
| 682 |
{
|
| 683 |
FLASH_Status status = FLASH_COMPLETE; |
| 684 |
__IO uint32_t tmp = 0;
|
| 685 |
|
| 686 |
/* Check the parameters */
|
| 687 |
assert_param(IS_FLASH_ADDRESS(Address)); |
| 688 |
|
| 689 |
#ifdef STM32F10X_XL
|
| 690 |
if(Address < FLASH_BANK1_END_ADDRESS - 2) |
| 691 |
{
|
| 692 |
/* Wait for last operation to be completed */
|
| 693 |
status = FLASH_WaitForLastBank1Operation(ProgramTimeout); |
| 694 |
if(status == FLASH_COMPLETE)
|
| 695 |
{
|
| 696 |
/* if the previous operation is completed, proceed to program the new first
|
| 697 |
half word */
|
| 698 |
FLASH->CR |= CR_PG_Set; |
| 699 |
|
| 700 |
*(__IO uint16_t*)Address = (uint16_t)Data; |
| 701 |
/* Wait for last operation to be completed */
|
| 702 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 703 |
|
| 704 |
if(status == FLASH_COMPLETE)
|
| 705 |
{
|
| 706 |
/* if the previous operation is completed, proceed to program the new second
|
| 707 |
half word */
|
| 708 |
tmp = Address + 2;
|
| 709 |
|
| 710 |
*(__IO uint16_t*) tmp = Data >> 16;
|
| 711 |
|
| 712 |
/* Wait for last operation to be completed */
|
| 713 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 714 |
|
| 715 |
/* Disable the PG Bit */
|
| 716 |
FLASH->CR &= CR_PG_Reset; |
| 717 |
} |
| 718 |
else
|
| 719 |
{
|
| 720 |
/* Disable the PG Bit */
|
| 721 |
FLASH->CR &= CR_PG_Reset; |
| 722 |
} |
| 723 |
} |
| 724 |
} |
| 725 |
else if(Address == (FLASH_BANK1_END_ADDRESS - 1)) |
| 726 |
{
|
| 727 |
/* Wait for last operation to be completed */
|
| 728 |
status = FLASH_WaitForLastBank1Operation(ProgramTimeout); |
| 729 |
|
| 730 |
if(status == FLASH_COMPLETE)
|
| 731 |
{
|
| 732 |
/* if the previous operation is completed, proceed to program the new first
|
| 733 |
half word */
|
| 734 |
FLASH->CR |= CR_PG_Set; |
| 735 |
|
| 736 |
*(__IO uint16_t*)Address = (uint16_t)Data; |
| 737 |
|
| 738 |
/* Wait for last operation to be completed */
|
| 739 |
status = FLASH_WaitForLastBank1Operation(ProgramTimeout); |
| 740 |
|
| 741 |
/* Disable the PG Bit */
|
| 742 |
FLASH->CR &= CR_PG_Reset; |
| 743 |
} |
| 744 |
else
|
| 745 |
{
|
| 746 |
/* Disable the PG Bit */
|
| 747 |
FLASH->CR &= CR_PG_Reset; |
| 748 |
} |
| 749 |
|
| 750 |
/* Wait for last operation to be completed */
|
| 751 |
status = FLASH_WaitForLastBank2Operation(ProgramTimeout); |
| 752 |
|
| 753 |
if(status == FLASH_COMPLETE)
|
| 754 |
{
|
| 755 |
/* if the previous operation is completed, proceed to program the new second
|
| 756 |
half word */
|
| 757 |
FLASH->CR2 |= CR_PG_Set; |
| 758 |
tmp = Address + 2;
|
| 759 |
|
| 760 |
*(__IO uint16_t*) tmp = Data >> 16;
|
| 761 |
|
| 762 |
/* Wait for last operation to be completed */
|
| 763 |
status = FLASH_WaitForLastBank2Operation(ProgramTimeout); |
| 764 |
|
| 765 |
/* Disable the PG Bit */
|
| 766 |
FLASH->CR2 &= CR_PG_Reset; |
| 767 |
} |
| 768 |
else
|
| 769 |
{
|
| 770 |
/* Disable the PG Bit */
|
| 771 |
FLASH->CR2 &= CR_PG_Reset; |
| 772 |
} |
| 773 |
} |
| 774 |
else
|
| 775 |
{
|
| 776 |
/* Wait for last operation to be completed */
|
| 777 |
status = FLASH_WaitForLastBank2Operation(ProgramTimeout); |
| 778 |
|
| 779 |
if(status == FLASH_COMPLETE)
|
| 780 |
{
|
| 781 |
/* if the previous operation is completed, proceed to program the new first
|
| 782 |
half word */
|
| 783 |
FLASH->CR2 |= CR_PG_Set; |
| 784 |
|
| 785 |
*(__IO uint16_t*)Address = (uint16_t)Data; |
| 786 |
/* Wait for last operation to be completed */
|
| 787 |
status = FLASH_WaitForLastBank2Operation(ProgramTimeout); |
| 788 |
|
| 789 |
if(status == FLASH_COMPLETE)
|
| 790 |
{
|
| 791 |
/* if the previous operation is completed, proceed to program the new second
|
| 792 |
half word */
|
| 793 |
tmp = Address + 2;
|
| 794 |
|
| 795 |
*(__IO uint16_t*) tmp = Data >> 16;
|
| 796 |
|
| 797 |
/* Wait for last operation to be completed */
|
| 798 |
status = FLASH_WaitForLastBank2Operation(ProgramTimeout); |
| 799 |
|
| 800 |
/* Disable the PG Bit */
|
| 801 |
FLASH->CR2 &= CR_PG_Reset; |
| 802 |
} |
| 803 |
else
|
| 804 |
{
|
| 805 |
/* Disable the PG Bit */
|
| 806 |
FLASH->CR2 &= CR_PG_Reset; |
| 807 |
} |
| 808 |
} |
| 809 |
} |
| 810 |
#else
|
| 811 |
/* Wait for last operation to be completed */
|
| 812 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 813 |
|
| 814 |
if(status == FLASH_COMPLETE)
|
| 815 |
{
|
| 816 |
/* if the previous operation is completed, proceed to program the new first
|
| 817 |
half word */
|
| 818 |
FLASH->CR |= CR_PG_Set; |
| 819 |
|
| 820 |
*(__IO uint16_t*)Address = (uint16_t)Data; |
| 821 |
/* Wait for last operation to be completed */
|
| 822 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 823 |
|
| 824 |
if(status == FLASH_COMPLETE)
|
| 825 |
{
|
| 826 |
/* if the previous operation is completed, proceed to program the new second
|
| 827 |
half word */
|
| 828 |
tmp = Address + 2;
|
| 829 |
|
| 830 |
*(__IO uint16_t*) tmp = Data >> 16;
|
| 831 |
|
| 832 |
/* Wait for last operation to be completed */
|
| 833 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 834 |
|
| 835 |
/* Disable the PG Bit */
|
| 836 |
FLASH->CR &= CR_PG_Reset; |
| 837 |
} |
| 838 |
else
|
| 839 |
{
|
| 840 |
/* Disable the PG Bit */
|
| 841 |
FLASH->CR &= CR_PG_Reset; |
| 842 |
} |
| 843 |
} |
| 844 |
#endif /* STM32F10X_XL */ |
| 845 |
|
| 846 |
/* Return the Program Status */
|
| 847 |
return status;
|
| 848 |
} |
| 849 |
|
| 850 |
/**
|
| 851 |
* @brief Programs a half word at a specified address.
|
| 852 |
* @note This function can be used for all STM32F10x devices.
|
| 853 |
* @param Address: specifies the address to be programmed.
|
| 854 |
* @param Data: specifies the data to be programmed.
|
| 855 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 856 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 857 |
*/
|
| 858 |
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) |
| 859 |
{
|
| 860 |
FLASH_Status status = FLASH_COMPLETE; |
| 861 |
/* Check the parameters */
|
| 862 |
assert_param(IS_FLASH_ADDRESS(Address)); |
| 863 |
|
| 864 |
#ifdef STM32F10X_XL
|
| 865 |
/* Wait for last operation to be completed */
|
| 866 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 867 |
|
| 868 |
if(Address < FLASH_BANK1_END_ADDRESS)
|
| 869 |
{
|
| 870 |
if(status == FLASH_COMPLETE)
|
| 871 |
{
|
| 872 |
/* if the previous operation is completed, proceed to program the new data */
|
| 873 |
FLASH->CR |= CR_PG_Set; |
| 874 |
|
| 875 |
*(__IO uint16_t*)Address = Data; |
| 876 |
/* Wait for last operation to be completed */
|
| 877 |
status = FLASH_WaitForLastBank1Operation(ProgramTimeout); |
| 878 |
|
| 879 |
/* Disable the PG Bit */
|
| 880 |
FLASH->CR &= CR_PG_Reset; |
| 881 |
} |
| 882 |
} |
| 883 |
else
|
| 884 |
{
|
| 885 |
if(status == FLASH_COMPLETE)
|
| 886 |
{
|
| 887 |
/* if the previous operation is completed, proceed to program the new data */
|
| 888 |
FLASH->CR2 |= CR_PG_Set; |
| 889 |
|
| 890 |
*(__IO uint16_t*)Address = Data; |
| 891 |
/* Wait for last operation to be completed */
|
| 892 |
status = FLASH_WaitForLastBank2Operation(ProgramTimeout); |
| 893 |
|
| 894 |
/* Disable the PG Bit */
|
| 895 |
FLASH->CR2 &= CR_PG_Reset; |
| 896 |
} |
| 897 |
} |
| 898 |
#else
|
| 899 |
/* Wait for last operation to be completed */
|
| 900 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 901 |
|
| 902 |
if(status == FLASH_COMPLETE)
|
| 903 |
{
|
| 904 |
/* if the previous operation is completed, proceed to program the new data */
|
| 905 |
FLASH->CR |= CR_PG_Set; |
| 906 |
|
| 907 |
*(__IO uint16_t*)Address = Data; |
| 908 |
/* Wait for last operation to be completed */
|
| 909 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 910 |
|
| 911 |
/* Disable the PG Bit */
|
| 912 |
FLASH->CR &= CR_PG_Reset; |
| 913 |
} |
| 914 |
#endif /* STM32F10X_XL */ |
| 915 |
|
| 916 |
/* Return the Program Status */
|
| 917 |
return status;
|
| 918 |
} |
| 919 |
|
| 920 |
/**
|
| 921 |
* @brief Programs a half word at a specified Option Byte Data address.
|
| 922 |
* @note This function can be used for all STM32F10x devices.
|
| 923 |
* @param Address: specifies the address to be programmed.
|
| 924 |
* This parameter can be 0x1FFFF804 or 0x1FFFF806.
|
| 925 |
* @param Data: specifies the data to be programmed.
|
| 926 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 927 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 928 |
*/
|
| 929 |
FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data) |
| 930 |
{
|
| 931 |
FLASH_Status status = FLASH_COMPLETE; |
| 932 |
/* Check the parameters */
|
| 933 |
assert_param(IS_OB_DATA_ADDRESS(Address)); |
| 934 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 935 |
|
| 936 |
if(status == FLASH_COMPLETE)
|
| 937 |
{
|
| 938 |
/* Authorize the small information block programming */
|
| 939 |
FLASH->OPTKEYR = FLASH_KEY1; |
| 940 |
FLASH->OPTKEYR = FLASH_KEY2; |
| 941 |
/* Enables the Option Bytes Programming operation */
|
| 942 |
FLASH->CR |= CR_OPTPG_Set; |
| 943 |
*(__IO uint16_t*)Address = Data; |
| 944 |
|
| 945 |
/* Wait for last operation to be completed */
|
| 946 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 947 |
if(status != FLASH_TIMEOUT)
|
| 948 |
{
|
| 949 |
/* if the program operation is completed, disable the OPTPG Bit */
|
| 950 |
FLASH->CR &= CR_OPTPG_Reset; |
| 951 |
} |
| 952 |
} |
| 953 |
/* Return the Option Byte Data Program Status */
|
| 954 |
return status;
|
| 955 |
} |
| 956 |
|
| 957 |
/**
|
| 958 |
* @brief Write protects the desired pages
|
| 959 |
* @note This function can be used for all STM32F10x devices.
|
| 960 |
* @param FLASH_Pages: specifies the address of the pages to be write protected.
|
| 961 |
* This parameter can be:
|
| 962 |
* @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31
|
| 963 |
* @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
|
| 964 |
* and FLASH_WRProt_Pages124to127
|
| 965 |
* @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
|
| 966 |
* FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
|
| 967 |
* @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
|
| 968 |
* FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127
|
| 969 |
* @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
|
| 970 |
* FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
|
| 971 |
* @arg FLASH_WRProt_AllPages
|
| 972 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 973 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 974 |
*/
|
| 975 |
FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages) |
| 976 |
{
|
| 977 |
uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; |
| 978 |
|
| 979 |
FLASH_Status status = FLASH_COMPLETE; |
| 980 |
|
| 981 |
/* Check the parameters */
|
| 982 |
assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); |
| 983 |
|
| 984 |
FLASH_Pages = (uint32_t)(~FLASH_Pages); |
| 985 |
WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask); |
| 986 |
WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
|
| 987 |
WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
|
| 988 |
WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
|
| 989 |
|
| 990 |
/* Wait for last operation to be completed */
|
| 991 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 992 |
|
| 993 |
if(status == FLASH_COMPLETE)
|
| 994 |
{
|
| 995 |
/* Authorizes the small information block programming */
|
| 996 |
FLASH->OPTKEYR = FLASH_KEY1; |
| 997 |
FLASH->OPTKEYR = FLASH_KEY2; |
| 998 |
FLASH->CR |= CR_OPTPG_Set; |
| 999 |
if(WRP0_Data != 0xFF) |
| 1000 |
{
|
| 1001 |
OB->WRP0 = WRP0_Data; |
| 1002 |
|
| 1003 |
/* Wait for last operation to be completed */
|
| 1004 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 1005 |
} |
| 1006 |
if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) |
| 1007 |
{
|
| 1008 |
OB->WRP1 = WRP1_Data; |
| 1009 |
|
| 1010 |
/* Wait for last operation to be completed */
|
| 1011 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 1012 |
} |
| 1013 |
if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) |
| 1014 |
{
|
| 1015 |
OB->WRP2 = WRP2_Data; |
| 1016 |
|
| 1017 |
/* Wait for last operation to be completed */
|
| 1018 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 1019 |
} |
| 1020 |
|
| 1021 |
if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) |
| 1022 |
{
|
| 1023 |
OB->WRP3 = WRP3_Data; |
| 1024 |
|
| 1025 |
/* Wait for last operation to be completed */
|
| 1026 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 1027 |
} |
| 1028 |
|
| 1029 |
if(status != FLASH_TIMEOUT)
|
| 1030 |
{
|
| 1031 |
/* if the program operation is completed, disable the OPTPG Bit */
|
| 1032 |
FLASH->CR &= CR_OPTPG_Reset; |
| 1033 |
} |
| 1034 |
} |
| 1035 |
/* Return the write protection operation Status */
|
| 1036 |
return status;
|
| 1037 |
} |
| 1038 |
|
| 1039 |
/**
|
| 1040 |
* @brief Enables or disables the read out protection.
|
| 1041 |
* @note If the user has already programmed the other option bytes before calling
|
| 1042 |
* this function, he must re-program them since this function erases all option bytes.
|
| 1043 |
* @note This function can be used for all STM32F10x devices.
|
| 1044 |
* @param Newstate: new state of the ReadOut Protection.
|
| 1045 |
* This parameter can be: ENABLE or DISABLE.
|
| 1046 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 1047 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 1048 |
*/
|
| 1049 |
FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) |
| 1050 |
{
|
| 1051 |
FLASH_Status status = FLASH_COMPLETE; |
| 1052 |
/* Check the parameters */
|
| 1053 |
assert_param(IS_FUNCTIONAL_STATE(NewState)); |
| 1054 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 1055 |
if(status == FLASH_COMPLETE)
|
| 1056 |
{
|
| 1057 |
/* Authorizes the small information block programming */
|
| 1058 |
FLASH->OPTKEYR = FLASH_KEY1; |
| 1059 |
FLASH->OPTKEYR = FLASH_KEY2; |
| 1060 |
FLASH->CR |= CR_OPTER_Set; |
| 1061 |
FLASH->CR |= CR_STRT_Set; |
| 1062 |
/* Wait for last operation to be completed */
|
| 1063 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 1064 |
if(status == FLASH_COMPLETE)
|
| 1065 |
{
|
| 1066 |
/* if the erase operation is completed, disable the OPTER Bit */
|
| 1067 |
FLASH->CR &= CR_OPTER_Reset; |
| 1068 |
/* Enable the Option Bytes Programming operation */
|
| 1069 |
FLASH->CR |= CR_OPTPG_Set; |
| 1070 |
if(NewState != DISABLE)
|
| 1071 |
{
|
| 1072 |
OB->RDP = 0x00;
|
| 1073 |
} |
| 1074 |
else
|
| 1075 |
{
|
| 1076 |
OB->RDP = RDP_Key; |
| 1077 |
} |
| 1078 |
/* Wait for last operation to be completed */
|
| 1079 |
status = FLASH_WaitForLastOperation(EraseTimeout); |
| 1080 |
|
| 1081 |
if(status != FLASH_TIMEOUT)
|
| 1082 |
{
|
| 1083 |
/* if the program operation is completed, disable the OPTPG Bit */
|
| 1084 |
FLASH->CR &= CR_OPTPG_Reset; |
| 1085 |
} |
| 1086 |
} |
| 1087 |
else
|
| 1088 |
{
|
| 1089 |
if(status != FLASH_TIMEOUT)
|
| 1090 |
{
|
| 1091 |
/* Disable the OPTER Bit */
|
| 1092 |
FLASH->CR &= CR_OPTER_Reset; |
| 1093 |
} |
| 1094 |
} |
| 1095 |
} |
| 1096 |
/* Return the protection operation Status */
|
| 1097 |
return status;
|
| 1098 |
} |
| 1099 |
|
| 1100 |
/**
|
| 1101 |
* @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
|
| 1102 |
* @note This function can be used for all STM32F10x devices.
|
| 1103 |
* @param OB_IWDG: Selects the IWDG mode
|
| 1104 |
* This parameter can be one of the following values:
|
| 1105 |
* @arg OB_IWDG_SW: Software IWDG selected
|
| 1106 |
* @arg OB_IWDG_HW: Hardware IWDG selected
|
| 1107 |
* @param OB_STOP: Reset event when entering STOP mode.
|
| 1108 |
* This parameter can be one of the following values:
|
| 1109 |
* @arg OB_STOP_NoRST: No reset generated when entering in STOP
|
| 1110 |
* @arg OB_STOP_RST: Reset generated when entering in STOP
|
| 1111 |
* @param OB_STDBY: Reset event when entering Standby mode.
|
| 1112 |
* This parameter can be one of the following values:
|
| 1113 |
* @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
|
| 1114 |
* @arg OB_STDBY_RST: Reset generated when entering in STANDBY
|
| 1115 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 1116 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 1117 |
*/
|
| 1118 |
FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) |
| 1119 |
{
|
| 1120 |
FLASH_Status status = FLASH_COMPLETE; |
| 1121 |
|
| 1122 |
/* Check the parameters */
|
| 1123 |
assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); |
| 1124 |
assert_param(IS_OB_STOP_SOURCE(OB_STOP)); |
| 1125 |
assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); |
| 1126 |
|
| 1127 |
/* Authorize the small information block programming */
|
| 1128 |
FLASH->OPTKEYR = FLASH_KEY1; |
| 1129 |
FLASH->OPTKEYR = FLASH_KEY2; |
| 1130 |
|
| 1131 |
/* Wait for last operation to be completed */
|
| 1132 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 1133 |
|
| 1134 |
if(status == FLASH_COMPLETE)
|
| 1135 |
{
|
| 1136 |
/* Enable the Option Bytes Programming operation */
|
| 1137 |
FLASH->CR |= CR_OPTPG_Set; |
| 1138 |
|
| 1139 |
OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8)));
|
| 1140 |
|
| 1141 |
/* Wait for last operation to be completed */
|
| 1142 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 1143 |
if(status != FLASH_TIMEOUT)
|
| 1144 |
{
|
| 1145 |
/* if the program operation is completed, disable the OPTPG Bit */
|
| 1146 |
FLASH->CR &= CR_OPTPG_Reset; |
| 1147 |
} |
| 1148 |
} |
| 1149 |
/* Return the Option Byte program Status */
|
| 1150 |
return status;
|
| 1151 |
} |
| 1152 |
|
| 1153 |
#ifdef STM32F10X_XL
|
| 1154 |
/**
|
| 1155 |
* @brief Configures to boot from Bank1 or Bank2.
|
| 1156 |
* @note This function can be used only for STM32F10x_XL density devices.
|
| 1157 |
* @param FLASH_BOOT: select the FLASH Bank to boot from.
|
| 1158 |
* This parameter can be one of the following values:
|
| 1159 |
* @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
|
| 1160 |
* position and this parameter is selected the device will boot from Bank1(Default).
|
| 1161 |
* @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
|
| 1162 |
* position and this parameter is selected the device will boot from Bank2 or Bank1,
|
| 1163 |
* depending on the activation of the bank. The active banks are checked in
|
| 1164 |
* the following order: Bank2, followed by Bank1.
|
| 1165 |
* The active bank is recognized by the value programmed at the base address
|
| 1166 |
* of the respective bank (corresponding to the initial stack pointer value
|
| 1167 |
* in the interrupt vector table).
|
| 1168 |
* For more information, please refer to AN2606 from www.st.com.
|
| 1169 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 1170 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 1171 |
*/
|
| 1172 |
FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT) |
| 1173 |
{
|
| 1174 |
FLASH_Status status = FLASH_COMPLETE; |
| 1175 |
assert_param(IS_FLASH_BOOT(FLASH_BOOT)); |
| 1176 |
/* Authorize the small information block programming */
|
| 1177 |
FLASH->OPTKEYR = FLASH_KEY1; |
| 1178 |
FLASH->OPTKEYR = FLASH_KEY2; |
| 1179 |
|
| 1180 |
/* Wait for last operation to be completed */
|
| 1181 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 1182 |
|
| 1183 |
if(status == FLASH_COMPLETE)
|
| 1184 |
{
|
| 1185 |
/* Enable the Option Bytes Programming operation */
|
| 1186 |
FLASH->CR |= CR_OPTPG_Set; |
| 1187 |
|
| 1188 |
if(FLASH_BOOT == FLASH_BOOT_Bank1)
|
| 1189 |
{
|
| 1190 |
OB->USER |= OB_USER_BFB2; |
| 1191 |
} |
| 1192 |
else
|
| 1193 |
{
|
| 1194 |
OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2)); |
| 1195 |
} |
| 1196 |
/* Wait for last operation to be completed */
|
| 1197 |
status = FLASH_WaitForLastOperation(ProgramTimeout); |
| 1198 |
if(status != FLASH_TIMEOUT)
|
| 1199 |
{
|
| 1200 |
/* if the program operation is completed, disable the OPTPG Bit */
|
| 1201 |
FLASH->CR &= CR_OPTPG_Reset; |
| 1202 |
} |
| 1203 |
} |
| 1204 |
/* Return the Option Byte program Status */
|
| 1205 |
return status;
|
| 1206 |
} |
| 1207 |
#endif /* STM32F10X_XL */ |
| 1208 |
|
| 1209 |
/**
|
| 1210 |
* @brief Returns the FLASH User Option Bytes values.
|
| 1211 |
* @note This function can be used for all STM32F10x devices.
|
| 1212 |
* @param None
|
| 1213 |
* @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
|
| 1214 |
* and RST_STDBY(Bit2).
|
| 1215 |
*/
|
| 1216 |
uint32_t FLASH_GetUserOptionByte(void)
|
| 1217 |
{
|
| 1218 |
/* Return the User Option Byte */
|
| 1219 |
return (uint32_t)(FLASH->OBR >> 2); |
| 1220 |
} |
| 1221 |
|
| 1222 |
/**
|
| 1223 |
* @brief Returns the FLASH Write Protection Option Bytes Register value.
|
| 1224 |
* @note This function can be used for all STM32F10x devices.
|
| 1225 |
* @param None
|
| 1226 |
* @retval The FLASH Write Protection Option Bytes Register value
|
| 1227 |
*/
|
| 1228 |
uint32_t FLASH_GetWriteProtectionOptionByte(void)
|
| 1229 |
{
|
| 1230 |
/* Return the Flash write protection Register value */
|
| 1231 |
return (uint32_t)(FLASH->WRPR);
|
| 1232 |
} |
| 1233 |
|
| 1234 |
/**
|
| 1235 |
* @brief Checks whether the FLASH Read Out Protection Status is set or not.
|
| 1236 |
* @note This function can be used for all STM32F10x devices.
|
| 1237 |
* @param None
|
| 1238 |
* @retval FLASH ReadOut Protection Status(SET or RESET)
|
| 1239 |
*/
|
| 1240 |
FlagStatus FLASH_GetReadOutProtectionStatus(void)
|
| 1241 |
{
|
| 1242 |
FlagStatus readoutstatus = RESET; |
| 1243 |
if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
|
| 1244 |
{
|
| 1245 |
readoutstatus = SET; |
| 1246 |
} |
| 1247 |
else
|
| 1248 |
{
|
| 1249 |
readoutstatus = RESET; |
| 1250 |
} |
| 1251 |
return readoutstatus;
|
| 1252 |
} |
| 1253 |
|
| 1254 |
/**
|
| 1255 |
* @brief Checks whether the FLASH Prefetch Buffer status is set or not.
|
| 1256 |
* @note This function can be used for all STM32F10x devices.
|
| 1257 |
* @param None
|
| 1258 |
* @retval FLASH Prefetch Buffer Status (SET or RESET).
|
| 1259 |
*/
|
| 1260 |
FlagStatus FLASH_GetPrefetchBufferStatus(void)
|
| 1261 |
{
|
| 1262 |
FlagStatus bitstatus = RESET; |
| 1263 |
|
| 1264 |
if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
|
| 1265 |
{
|
| 1266 |
bitstatus = SET; |
| 1267 |
} |
| 1268 |
else
|
| 1269 |
{
|
| 1270 |
bitstatus = RESET; |
| 1271 |
} |
| 1272 |
/* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
|
| 1273 |
return bitstatus;
|
| 1274 |
} |
| 1275 |
|
| 1276 |
/**
|
| 1277 |
* @brief Enables or disables the specified FLASH interrupts.
|
| 1278 |
* @note This function can be used for all STM32F10x devices.
|
| 1279 |
* - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
|
| 1280 |
for Bank1 and Bank2.
|
| 1281 |
* - For other devices it enables or disables the specified FLASH interrupts for Bank1.
|
| 1282 |
* @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
|
| 1283 |
* This parameter can be any combination of the following values:
|
| 1284 |
* @arg FLASH_IT_ERROR: FLASH Error Interrupt
|
| 1285 |
* @arg FLASH_IT_EOP: FLASH end of operation Interrupt
|
| 1286 |
* @param NewState: new state of the specified Flash interrupts.
|
| 1287 |
* This parameter can be: ENABLE or DISABLE.
|
| 1288 |
* @retval None
|
| 1289 |
*/
|
| 1290 |
void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
|
| 1291 |
{
|
| 1292 |
#ifdef STM32F10X_XL
|
| 1293 |
/* Check the parameters */
|
| 1294 |
assert_param(IS_FLASH_IT(FLASH_IT)); |
| 1295 |
assert_param(IS_FUNCTIONAL_STATE(NewState)); |
| 1296 |
|
| 1297 |
if((FLASH_IT & 0x80000000) != 0x0) |
| 1298 |
{
|
| 1299 |
if(NewState != DISABLE)
|
| 1300 |
{
|
| 1301 |
/* Enable the interrupt sources */
|
| 1302 |
FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
|
| 1303 |
} |
| 1304 |
else
|
| 1305 |
{
|
| 1306 |
/* Disable the interrupt sources */
|
| 1307 |
FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
|
| 1308 |
} |
| 1309 |
} |
| 1310 |
else
|
| 1311 |
{
|
| 1312 |
if(NewState != DISABLE)
|
| 1313 |
{
|
| 1314 |
/* Enable the interrupt sources */
|
| 1315 |
FLASH->CR |= FLASH_IT; |
| 1316 |
} |
| 1317 |
else
|
| 1318 |
{
|
| 1319 |
/* Disable the interrupt sources */
|
| 1320 |
FLASH->CR &= ~(uint32_t)FLASH_IT; |
| 1321 |
} |
| 1322 |
} |
| 1323 |
#else
|
| 1324 |
/* Check the parameters */
|
| 1325 |
assert_param(IS_FLASH_IT(FLASH_IT)); |
| 1326 |
assert_param(IS_FUNCTIONAL_STATE(NewState)); |
| 1327 |
|
| 1328 |
if(NewState != DISABLE)
|
| 1329 |
{
|
| 1330 |
/* Enable the interrupt sources */
|
| 1331 |
FLASH->CR |= FLASH_IT; |
| 1332 |
} |
| 1333 |
else
|
| 1334 |
{
|
| 1335 |
/* Disable the interrupt sources */
|
| 1336 |
FLASH->CR &= ~(uint32_t)FLASH_IT; |
| 1337 |
} |
| 1338 |
#endif /* STM32F10X_XL */ |
| 1339 |
} |
| 1340 |
|
| 1341 |
/**
|
| 1342 |
* @brief Checks whether the specified FLASH flag is set or not.
|
| 1343 |
* @note This function can be used for all STM32F10x devices.
|
| 1344 |
* - For STM32F10X_XL devices, this function checks whether the specified
|
| 1345 |
* Bank1 or Bank2 flag is set or not.
|
| 1346 |
* - For other devices, it checks whether the specified Bank1 flag is
|
| 1347 |
* set or not.
|
| 1348 |
* @param FLASH_FLAG: specifies the FLASH flag to check.
|
| 1349 |
* This parameter can be one of the following values:
|
| 1350 |
* @arg FLASH_FLAG_BSY: FLASH Busy flag
|
| 1351 |
* @arg FLASH_FLAG_PGERR: FLASH Program error flag
|
| 1352 |
* @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
|
| 1353 |
* @arg FLASH_FLAG_EOP: FLASH End of Operation flag
|
| 1354 |
* @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag
|
| 1355 |
* @retval The new state of FLASH_FLAG (SET or RESET).
|
| 1356 |
*/
|
| 1357 |
FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) |
| 1358 |
{
|
| 1359 |
FlagStatus bitstatus = RESET; |
| 1360 |
|
| 1361 |
#ifdef STM32F10X_XL
|
| 1362 |
/* Check the parameters */
|
| 1363 |
assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; |
| 1364 |
if(FLASH_FLAG == FLASH_FLAG_OPTERR)
|
| 1365 |
{
|
| 1366 |
if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
|
| 1367 |
{
|
| 1368 |
bitstatus = SET; |
| 1369 |
} |
| 1370 |
else
|
| 1371 |
{
|
| 1372 |
bitstatus = RESET; |
| 1373 |
} |
| 1374 |
} |
| 1375 |
else
|
| 1376 |
{
|
| 1377 |
if((FLASH_FLAG & 0x80000000) != 0x0) |
| 1378 |
{
|
| 1379 |
if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
|
| 1380 |
{
|
| 1381 |
bitstatus = SET; |
| 1382 |
} |
| 1383 |
else
|
| 1384 |
{
|
| 1385 |
bitstatus = RESET; |
| 1386 |
} |
| 1387 |
} |
| 1388 |
else
|
| 1389 |
{
|
| 1390 |
if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
|
| 1391 |
{
|
| 1392 |
bitstatus = SET; |
| 1393 |
} |
| 1394 |
else
|
| 1395 |
{
|
| 1396 |
bitstatus = RESET; |
| 1397 |
} |
| 1398 |
} |
| 1399 |
} |
| 1400 |
#else
|
| 1401 |
/* Check the parameters */
|
| 1402 |
assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; |
| 1403 |
if(FLASH_FLAG == FLASH_FLAG_OPTERR)
|
| 1404 |
{
|
| 1405 |
if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
|
| 1406 |
{
|
| 1407 |
bitstatus = SET; |
| 1408 |
} |
| 1409 |
else
|
| 1410 |
{
|
| 1411 |
bitstatus = RESET; |
| 1412 |
} |
| 1413 |
} |
| 1414 |
else
|
| 1415 |
{
|
| 1416 |
if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
|
| 1417 |
{
|
| 1418 |
bitstatus = SET; |
| 1419 |
} |
| 1420 |
else
|
| 1421 |
{
|
| 1422 |
bitstatus = RESET; |
| 1423 |
} |
| 1424 |
} |
| 1425 |
#endif /* STM32F10X_XL */ |
| 1426 |
|
| 1427 |
/* Return the new state of FLASH_FLAG (SET or RESET) */
|
| 1428 |
return bitstatus;
|
| 1429 |
} |
| 1430 |
|
| 1431 |
/**
|
| 1432 |
* @brief Clears the FLASH's pending flags.
|
| 1433 |
* @note This function can be used for all STM32F10x devices.
|
| 1434 |
* - For STM32F10X_XL devices, this function clears Bank1 or Bank2?s pending flags
|
| 1435 |
* - For other devices, it clears Bank1?s pending flags.
|
| 1436 |
* @param FLASH_FLAG: specifies the FLASH flags to clear.
|
| 1437 |
* This parameter can be any combination of the following values:
|
| 1438 |
* @arg FLASH_FLAG_PGERR: FLASH Program error flag
|
| 1439 |
* @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
|
| 1440 |
* @arg FLASH_FLAG_EOP: FLASH End of Operation flag
|
| 1441 |
* @retval None
|
| 1442 |
*/
|
| 1443 |
void FLASH_ClearFlag(uint32_t FLASH_FLAG)
|
| 1444 |
{
|
| 1445 |
#ifdef STM32F10X_XL
|
| 1446 |
/* Check the parameters */
|
| 1447 |
assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; |
| 1448 |
|
| 1449 |
if((FLASH_FLAG & 0x80000000) != 0x0) |
| 1450 |
{
|
| 1451 |
/* Clear the flags */
|
| 1452 |
FLASH->SR2 = FLASH_FLAG; |
| 1453 |
} |
| 1454 |
else
|
| 1455 |
{
|
| 1456 |
/* Clear the flags */
|
| 1457 |
FLASH->SR = FLASH_FLAG; |
| 1458 |
} |
| 1459 |
|
| 1460 |
#else
|
| 1461 |
/* Check the parameters */
|
| 1462 |
assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; |
| 1463 |
|
| 1464 |
/* Clear the flags */
|
| 1465 |
FLASH->SR = FLASH_FLAG; |
| 1466 |
#endif /* STM32F10X_XL */ |
| 1467 |
} |
| 1468 |
|
| 1469 |
/**
|
| 1470 |
* @brief Returns the FLASH Status.
|
| 1471 |
* @note This function can be used for all STM32F10x devices, it is equivalent
|
| 1472 |
* to FLASH_GetBank1Status function.
|
| 1473 |
* @param None
|
| 1474 |
* @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
|
| 1475 |
* FLASH_ERROR_WRP or FLASH_COMPLETE
|
| 1476 |
*/
|
| 1477 |
FLASH_Status FLASH_GetStatus(void)
|
| 1478 |
{
|
| 1479 |
FLASH_Status flashstatus = FLASH_COMPLETE; |
| 1480 |
|
| 1481 |
if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
|
| 1482 |
{
|
| 1483 |
flashstatus = FLASH_BUSY; |
| 1484 |
} |
| 1485 |
else
|
| 1486 |
{
|
| 1487 |
if((FLASH->SR & FLASH_FLAG_PGERR) != 0) |
| 1488 |
{
|
| 1489 |
flashstatus = FLASH_ERROR_PG; |
| 1490 |
} |
| 1491 |
else
|
| 1492 |
{
|
| 1493 |
if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 ) |
| 1494 |
{
|
| 1495 |
flashstatus = FLASH_ERROR_WRP; |
| 1496 |
} |
| 1497 |
else
|
| 1498 |
{
|
| 1499 |
flashstatus = FLASH_COMPLETE; |
| 1500 |
} |
| 1501 |
} |
| 1502 |
} |
| 1503 |
/* Return the Flash Status */
|
| 1504 |
return flashstatus;
|
| 1505 |
} |
| 1506 |
|
| 1507 |
/**
|
| 1508 |
* @brief Returns the FLASH Bank1 Status.
|
| 1509 |
* @note This function can be used for all STM32F10x devices, it is equivalent
|
| 1510 |
* to FLASH_GetStatus function.
|
| 1511 |
* @param None
|
| 1512 |
* @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
|
| 1513 |
* FLASH_ERROR_WRP or FLASH_COMPLETE
|
| 1514 |
*/
|
| 1515 |
FLASH_Status FLASH_GetBank1Status(void)
|
| 1516 |
{
|
| 1517 |
FLASH_Status flashstatus = FLASH_COMPLETE; |
| 1518 |
|
| 1519 |
if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY)
|
| 1520 |
{
|
| 1521 |
flashstatus = FLASH_BUSY; |
| 1522 |
} |
| 1523 |
else
|
| 1524 |
{
|
| 1525 |
if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0) |
| 1526 |
{
|
| 1527 |
flashstatus = FLASH_ERROR_PG; |
| 1528 |
} |
| 1529 |
else
|
| 1530 |
{
|
| 1531 |
if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 ) |
| 1532 |
{
|
| 1533 |
flashstatus = FLASH_ERROR_WRP; |
| 1534 |
} |
| 1535 |
else
|
| 1536 |
{
|
| 1537 |
flashstatus = FLASH_COMPLETE; |
| 1538 |
} |
| 1539 |
} |
| 1540 |
} |
| 1541 |
/* Return the Flash Status */
|
| 1542 |
return flashstatus;
|
| 1543 |
} |
| 1544 |
|
| 1545 |
#ifdef STM32F10X_XL
|
| 1546 |
/**
|
| 1547 |
* @brief Returns the FLASH Bank2 Status.
|
| 1548 |
* @note This function can be used for STM32F10x_XL density devices.
|
| 1549 |
* @param None
|
| 1550 |
* @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
|
| 1551 |
* FLASH_ERROR_WRP or FLASH_COMPLETE
|
| 1552 |
*/
|
| 1553 |
FLASH_Status FLASH_GetBank2Status(void)
|
| 1554 |
{
|
| 1555 |
FLASH_Status flashstatus = FLASH_COMPLETE; |
| 1556 |
|
| 1557 |
if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) |
| 1558 |
{
|
| 1559 |
flashstatus = FLASH_BUSY; |
| 1560 |
} |
| 1561 |
else
|
| 1562 |
{
|
| 1563 |
if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0) |
| 1564 |
{
|
| 1565 |
flashstatus = FLASH_ERROR_PG; |
| 1566 |
} |
| 1567 |
else
|
| 1568 |
{
|
| 1569 |
if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 ) |
| 1570 |
{
|
| 1571 |
flashstatus = FLASH_ERROR_WRP; |
| 1572 |
} |
| 1573 |
else
|
| 1574 |
{
|
| 1575 |
flashstatus = FLASH_COMPLETE; |
| 1576 |
} |
| 1577 |
} |
| 1578 |
} |
| 1579 |
/* Return the Flash Status */
|
| 1580 |
return flashstatus;
|
| 1581 |
} |
| 1582 |
#endif /* STM32F10X_XL */ |
| 1583 |
/**
|
| 1584 |
* @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
|
| 1585 |
* @note This function can be used for all STM32F10x devices,
|
| 1586 |
* it is equivalent to FLASH_WaitForLastBank1Operation.
|
| 1587 |
* - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
|
| 1588 |
* to complete or a TIMEOUT to occur.
|
| 1589 |
* - For all other devices it waits for a Flash operation to complete
|
| 1590 |
* or a TIMEOUT to occur.
|
| 1591 |
* @param Timeout: FLASH programming Timeout
|
| 1592 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 1593 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 1594 |
*/
|
| 1595 |
FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) |
| 1596 |
{
|
| 1597 |
FLASH_Status status = FLASH_COMPLETE; |
| 1598 |
|
| 1599 |
/* Check for the Flash Status */
|
| 1600 |
status = FLASH_GetBank1Status(); |
| 1601 |
/* Wait for a Flash operation to complete or a TIMEOUT to occur */
|
| 1602 |
while((status == FLASH_BUSY) && (Timeout != 0x00)) |
| 1603 |
{
|
| 1604 |
status = FLASH_GetBank1Status(); |
| 1605 |
Timeout--; |
| 1606 |
} |
| 1607 |
if(Timeout == 0x00 ) |
| 1608 |
{
|
| 1609 |
status = FLASH_TIMEOUT; |
| 1610 |
} |
| 1611 |
/* Return the operation status */
|
| 1612 |
return status;
|
| 1613 |
} |
| 1614 |
|
| 1615 |
/**
|
| 1616 |
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
|
| 1617 |
* @note This function can be used for all STM32F10x devices,
|
| 1618 |
* it is equivalent to FLASH_WaitForLastOperation.
|
| 1619 |
* @param Timeout: FLASH programming Timeout
|
| 1620 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 1621 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 1622 |
*/
|
| 1623 |
FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout) |
| 1624 |
{
|
| 1625 |
FLASH_Status status = FLASH_COMPLETE; |
| 1626 |
|
| 1627 |
/* Check for the Flash Status */
|
| 1628 |
status = FLASH_GetBank1Status(); |
| 1629 |
/* Wait for a Flash operation to complete or a TIMEOUT to occur */
|
| 1630 |
while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00)) |
| 1631 |
{
|
| 1632 |
status = FLASH_GetBank1Status(); |
| 1633 |
Timeout--; |
| 1634 |
} |
| 1635 |
if(Timeout == 0x00 ) |
| 1636 |
{
|
| 1637 |
status = FLASH_TIMEOUT; |
| 1638 |
} |
| 1639 |
/* Return the operation status */
|
| 1640 |
return status;
|
| 1641 |
} |
| 1642 |
|
| 1643 |
#ifdef STM32F10X_XL
|
| 1644 |
/**
|
| 1645 |
* @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
|
| 1646 |
* @note This function can be used only for STM32F10x_XL density devices.
|
| 1647 |
* @param Timeout: FLASH programming Timeout
|
| 1648 |
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
|
| 1649 |
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
|
| 1650 |
*/
|
| 1651 |
FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout) |
| 1652 |
{
|
| 1653 |
FLASH_Status status = FLASH_COMPLETE; |
| 1654 |
|
| 1655 |
/* Check for the Flash Status */
|
| 1656 |
status = FLASH_GetBank2Status(); |
| 1657 |
/* Wait for a Flash operation to complete or a TIMEOUT to occur */
|
| 1658 |
while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00)) |
| 1659 |
{
|
| 1660 |
status = FLASH_GetBank2Status(); |
| 1661 |
Timeout--; |
| 1662 |
} |
| 1663 |
if(Timeout == 0x00 ) |
| 1664 |
{
|
| 1665 |
status = FLASH_TIMEOUT; |
| 1666 |
} |
| 1667 |
/* Return the operation status */
|
| 1668 |
return status;
|
| 1669 |
} |
| 1670 |
#endif /* STM32F10X_XL */ |
| 1671 |
|
| 1672 |
/**
|
| 1673 |
* @}
|
| 1674 |
*/
|
| 1675 |
|
| 1676 |
/**
|
| 1677 |
* @}
|
| 1678 |
*/
|
| 1679 |
|
| 1680 |
/**
|
| 1681 |
* @}
|
| 1682 |
*/
|
| 1683 |
|
| 1684 |
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|