AMiRo-OS

/************************************************************************************//**

* \file         Source\ARMCM4_STM32\flash.c

* \brief        Bootloader flash driver source file.

* \ingroup      Target_ARMCM4_STM32

* \internal

*----------------------------------------------------------------------------------------

*                          C O P Y R I G H T

*----------------------------------------------------------------------------------------

*   Copyright (c) 2013  by Feaser    http://www.feaser.com    All rights reserved

*

*----------------------------------------------------------------------------------------

*                            L I C E N S E

*----------------------------------------------------------------------------------------

* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or

* modify it under the terms of the GNU General Public License as published by the Free

* Software Foundation, either version 3 of the License, or (at your option) any later

* version.

*

* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;

* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR

* PURPOSE. See the GNU General Public License for more details.

*

* You should have received a copy of the GNU General Public License along with OpenBLT.

* If not, see <http://www.gnu.org/licenses/>.

*

* A special exception to the GPL is included to allow you to distribute a combined work 

* that includes OpenBLT without being obliged to provide the source code for any 

* proprietary components. The exception text is included at the bottom of the license

* file <license.html>.

* 

* \endinternal

****************************************************************************************/

/****************************************************************************************

* Include files

****************************************************************************************/

#include "boot.h"                                /* bootloader generic header          */

#include "stm32f4xx.h"                           /* STM32 registers                    */

#include "stm32f4xx_conf.h"                      /* STM32 peripheral drivers           */

/****************************************************************************************

* Macro definitions

****************************************************************************************/

/** \brief Value for an invalid flash sector. */

#define FLASH_INVALID_SECTOR            (0xff)

/** \brief Value for an invalid flash address. */

#define FLASH_INVALID_ADDRESS           (0xffffffff)

/** \brief Standard size of a flash block for writing. */

#define FLASH_WRITE_BLOCK_SIZE          (512)

/** \brief Total numbers of sectors in array flashLayout[]. */

#define FLASH_TOTAL_SECTORS             (sizeof(flashLayout)/sizeof(flashLayout[0]))

/** \brief Offset into the user program's vector table where the checksum is located. */

#define FLASH_VECTOR_TABLE_CS_OFFSET    (0x1ac)

/****************************************************************************************

* Type definitions

****************************************************************************************/

/** \brief Flash sector descriptor type. */

typedef struct 

{

  blt_addr   sector_start;                       /**< sector start address             */

  blt_int32u sector_size;                        /**< sector size in bytes             */

  blt_int8u  sector_num;                         /**< sector number                    */

} tFlashSector;

/** \brief    Structure type for grouping flash block information.

 *  \details  Programming is done per block of max FLASH_WRITE_BLOCK_SIZE. for this a 

 *            flash block manager is implemented in this driver. this flash block manager

 *            depends on this flash block info structure. It holds the base address of 

 *            the flash block and the data that should be programmed into the flash 

 *            block. The .base_addr must be a multiple of FLASH_WRITE_BLOCK_SIZE.

 */

typedef struct

{

  blt_addr  base_addr;

  blt_int8u data[FLASH_WRITE_BLOCK_SIZE];

} tFlashBlockInfo;

/****************************************************************************************

* Function prototypes

****************************************************************************************/

static blt_bool  FlashInitBlock(tFlashBlockInfo *block, blt_addr address);

static tFlashBlockInfo *FlashSwitchBlock(tFlashBlockInfo *block, blt_addr base_addr);

static blt_bool  FlashAddToBlock(tFlashBlockInfo *block, blt_addr address, 

                                 blt_int8u *data, blt_int32u len);

static blt_bool  FlashWriteBlock(tFlashBlockInfo *block);

static blt_bool  FlashEraseSectors(blt_int8u first_sector, blt_int8u last_sector);

static blt_int8u FlashGetSector(blt_addr address);

/****************************************************************************************

* Local constant declarations

****************************************************************************************/

/** \brief   Array wit the layout of the flash memory.

 *  \details Also controls what part of the flash memory is reserved for the bootloader. 

 *           If the bootloader size changes, the reserved sectors for the bootloader 

 *           might need adjustment to make sure the bootloader doesn't get overwritten.

 */

static const tFlashSector flashLayout[] =

{

  /* space is reserved for a bootloader configuration with all supported communication

   * interfaces enabled. when for example only UART is needed, than the space required

   * for the bootloader can be made a lot smaller here.

   */

  /* { 0x08000000, 0x04000,  0},           flash sector  0 - reserved for bootloader   */

  /* { 0x08004000, 0x04000,  1},           flash sector  1 - reserved for bootloader   */

  { 0x08008000, 0x04000,  2},           /* flash sector  2 - 16kb                      */

  { 0x0800c000, 0x04000,  3},           /* flash sector  3 -  16kb                     */

  { 0x08010000, 0x10000,  4},           /* flash sector  4 -  64kb                     */

  { 0x08020000, 0x20000,  5},           /* flash sector  5 - 128kb                     */

  { 0x08040000, 0x20000,  6},           /* flash sector  6 - 128kb                     */

  { 0x08060000, 0x20000,  7},           /* flash sector  7 - 128kb                     */

#if (BOOT_NVM_SIZE_KB > 512)

  { 0x08080000, 0x20000,  8},           /* flash sector  8 - 128kb                     */

  { 0x080A0000, 0x20000,  9},           /* flash sector  9 - 128kb                     */

  { 0x080C0000, 0x20000, 10},           /* flash sector 10 - 128kb                     */

  { 0x080E0000, 0x20000, 11},           /* flash sector 11 - 128kb                     */

#endif

#if (BOOT_NVM_SIZE_KB > 1024)

  { 0x08100000, 0x04000, 12},           /* flash sector 12 -  16kb                     */

  { 0x08104000, 0x04000, 13},           /* flash sector 13 -  16kb                     */

  { 0x08108000, 0x04000, 14},           /* flash sector 14 -  16kb                     */

  { 0x0810c000, 0x04000, 15},           /* flash sector 15 -  16kb                     */

  { 0x08110000, 0x10000, 16},           /* flash sector 16 -  64kb                     */

  { 0x08120000, 0x20000, 17},           /* flash sector 17 - 128kb                     */

  { 0x08140000, 0x20000, 18},           /* flash sector 18 - 128kb                     */

  { 0x08160000, 0x20000, 19},           /* flash sector 19 - 128kb                     */

  { 0x08180000, 0x20000, 20},           /* flash sector 20 - 128kb                     */

  { 0x081A0000, 0x20000, 21},           /* flash sector 21 - 128kb                     */

  { 0x081C0000, 0x20000, 22},           /* flash sector 22 - 128kb                     */

  { 0x081E0000, 0x20000, 23},           /* flash sector 23 - 128kb                     */

#endif

#if (BOOT_NVM_SIZE_KB > 2048)

#error "BOOT_NVM_SIZE_KB > 2048 is currently not supported."

#endif

};

/** \brief   Lookup table to quickly convert sector number to mask.

 *  \details The STM32F4x Standard Peripheral Library driver needs a sector mask instead

 *           of the sector number. this ROM lookup table can quickly convert the sector

 *           number to its mask.

 */

static const blt_int16u flashSectorNumToMask[] =

{

  FLASH_Sector_0,                        /* idx 0  - mask for sector 0                 */

  FLASH_Sector_1,                        /* idx 1  - mask for sector 1                 */

  FLASH_Sector_2,                        /* idx 2  - mask for sector 2                 */

  FLASH_Sector_3,                        /* idx 3  - mask for sector 3                 */

  FLASH_Sector_4,                        /* idx 4  - mask for sector 4                 */

  FLASH_Sector_5,                        /* idx 5  - mask for sector 5                 */

  FLASH_Sector_6,                        /* idx 6  - mask for sector 6                 */

  FLASH_Sector_7,                        /* idx 7  - mask for sector 7                 */

  FLASH_Sector_8,                        /* idx 8  - mask for sector 8                 */

  FLASH_Sector_9,                        /* idx 9  - mask for sector 9                 */

  FLASH_Sector_10,                       /* idx 10 - mask for sector 10                */

  FLASH_Sector_11,                       /* idx 11 - mask for sector 11                */

  FLASH_Sector_12,                       /* idx 12 - mask for sector 12                */

  FLASH_Sector_13,                       /* idx 13 - mask for sector 13                */

  FLASH_Sector_14,                       /* idx 14 - mask for sector 14                */

  FLASH_Sector_15,                       /* idx 15 - mask for sector 15                */

  FLASH_Sector_16,                       /* idx 16 - mask for sector 16                */

  FLASH_Sector_17,                       /* idx 17 - mask for sector 17                */

  FLASH_Sector_18,                       /* idx 18 - mask for sector 18                */

  FLASH_Sector_19,                       /* idx 19 - mask for sector 19                */

  FLASH_Sector_20,                       /* idx 20 - mask for sector 20                */

  FLASH_Sector_21,                       /* idx 21 - mask for sector 21                */

  FLASH_Sector_22,                       /* idx 22 - mask for sector 22                */

  FLASH_Sector_23                        /* idx 23 - mask for sector 23                */

};

/****************************************************************************************

* Local data declarations

****************************************************************************************/

/** \brief   Local variable with information about the flash block that is currently

 *           being operated on.

 *  \details The smallest amount of flash that can be programmed is 

 *           FLASH_WRITE_BLOCK_SIZE. A flash block manager is implemented in this driver

 *           and stores info in this variable. Whenever new data should be flashed, it

 *           is first added to a RAM buffer, which is part of this variable. Whenever

 *           the RAM buffer, which has the size of a flash block, is full or  data needs

 *           to be written to a different block, the contents of the RAM buffer are 

 *           programmed to flash. The flash block manager requires some software 

 *           overhead, yet results is faster flash programming because data is first 

 *           harvested, ideally until there is enough to program an entire flash block, 

 *           before the flash device is actually operated on.

 */

static tFlashBlockInfo blockInfo;

/** \brief   Local variable with information about the flash boot block.

 *  \details The first block of the user program holds the vector table, which on the 

 *           STM32 is also the where the checksum is written to. Is it likely that 

 *           the vector table is first flashed and then, at the end of the programming

 *           sequence, the checksum. This means that this flash block need to be written

 *           to twice. Normally this is not a problem with flash memory, as long as you

 *           write the same values to those bytes that are not supposed to be changed 

 *           and the locations where you do write to are still in the erased 0xFF state.

 *           Unfortunately, writing twice to flash this way, does not work reliably on 

 *           all micros. This is why we need to have an extra block, the bootblock,

 *           placed under the management of the block manager. This way is it possible 

 *           to implement functionality so that the bootblock is only written to once

 *           at the end of the programming sequence.

 */

static tFlashBlockInfo bootBlockInfo;

/************************************************************************************//**

** \brief     Initializes the flash driver. 

** \return    none.

**

****************************************************************************************/

void FlashInit(void)

{

  /* init the flash block info structs by setting the address to an invalid address */

  blockInfo.base_addr = FLASH_INVALID_ADDRESS;

  bootBlockInfo.base_addr = FLASH_INVALID_ADDRESS;

} /*** end of FlashInit ***/

/************************************************************************************//**

** \brief     Writes the data to flash through a flash block manager. Note that this

**            function also checks that no data is programmed outside the flash 

**            memory region, so the bootloader can never be overwritten.

** \param     addr Start address.

** \param     len  Length in bytes.

** \param     data Pointer to the data buffer.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise. 

**

****************************************************************************************/

blt_bool FlashWrite(blt_addr addr, blt_int32u len, blt_int8u *data)

{

  blt_addr base_addr;

  /* make sure the addresses are within the flash device */

  if ( (FlashGetSector(addr) == FLASH_INVALID_SECTOR) || \

       (FlashGetSector(addr+len-1) == FLASH_INVALID_SECTOR) )

  {

    return BLT_FALSE;       

  }

  /* if this is the bootblock, then let the boot block manager handle it */

  base_addr = (addr/FLASH_WRITE_BLOCK_SIZE)*FLASH_WRITE_BLOCK_SIZE;

  if (base_addr == flashLayout[0].sector_start)

  {

    /* let the boot block manager handle it */

    return FlashAddToBlock(&bootBlockInfo, addr, data, len);

  }

  /* let the block manager handle it */

  return FlashAddToBlock(&blockInfo, addr, data, len);

} /*** end of FlashWrite ***/

/************************************************************************************//**

** \brief     Erases the flash memory. Note that this function also checks that no 

**            data is erased outside the flash memory region, so the bootloader can 

**            never be erased.

** \param     addr Start address.

** \param     len  Length in bytes.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise. 

**

****************************************************************************************/

blt_bool FlashErase(blt_addr addr, blt_int32u len)

{

  blt_int8u first_sector;

  blt_int8u last_sector;

  /* obtain the first and last sector number */

  first_sector = FlashGetSector(addr);

  last_sector  = FlashGetSector(addr+len-1);

  /* check them */

  if ( (first_sector == FLASH_INVALID_SECTOR) || (last_sector == FLASH_INVALID_SECTOR) )

  {

    return BLT_FALSE;

  }

  /* erase the sectors */

  return FlashEraseSectors(first_sector, last_sector);

} /*** end of FlashErase ***/

/************************************************************************************//**

** \brief     Writes a checksum of the user program to non-volatile memory. This is

**            performed once the entire user program has been programmed. Through

**            the checksum, the bootloader can check if the programming session

**            was completed, which indicates that a valid user programming is

**            present and can be started.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise. 

**

****************************************************************************************/

blt_bool FlashWriteChecksum(void)

{

  blt_int32u signature_checksum = 0;

  /* for the STM32 target we defined the checksum as the Two's complement value of the

   * sum of the first 7 exception addresses.

   *

   * Layout of the vector table:

   *    0x08000000 Initial stack pointer 

   *    0x08000004 Reset Handler

   *    0x08000008 NMI Handler

   *    0x0800000C Hard Fault Handler

   *    0x08000010 MPU Fault Handler 

   *    0x08000014 Bus Fault Handler

   *    0x08000018 Usage Fault Handler

   *

   *    signature_checksum = Two's complement of (SUM(exception address values))

   *   

   *    the bootloader writes this 32-bit checksum value right after the vector table

   *    of the user program. note that this means one extra dummy entry must be added

   *    at the end of the user program's vector table to reserve storage space for the

   *    checksum.

   */

  /* first check that the bootblock contains valid data. if not, this means the

   * bootblock is not part of the reprogramming this time and therefore no

   * new checksum needs to be written

   */

   if (bootBlockInfo.base_addr == FLASH_INVALID_ADDRESS)

   {

    return BLT_TRUE;

   }

  /* compute the checksum. note that the user program's vectors are not yet written

   * to flash but are present in the bootblock data structure at this point.

   */

  signature_checksum += *((blt_int32u*)(&bootBlockInfo.data[0+0x00]));

  signature_checksum += *((blt_int32u*)(&bootBlockInfo.data[0+0x04]));

  signature_checksum += *((blt_int32u*)(&bootBlockInfo.data[0+0x08]));

  signature_checksum += *((blt_int32u*)(&bootBlockInfo.data[0+0x0C]));

  signature_checksum += *((blt_int32u*)(&bootBlockInfo.data[0+0x10]));

  signature_checksum += *((blt_int32u*)(&bootBlockInfo.data[0+0x14]));

  signature_checksum += *((blt_int32u*)(&bootBlockInfo.data[0+0x18]));

  signature_checksum  = ~signature_checksum; /* one's complement */

  signature_checksum += 1; /* two's complement */

  /* write the checksum */

  return FlashWrite(flashLayout[0].sector_start+FLASH_VECTOR_TABLE_CS_OFFSET, 

                    sizeof(blt_addr), (blt_int8u*)&signature_checksum);

} /*** end of FlashWriteChecksum ***/

/************************************************************************************//**

** \brief     Verifies the checksum, which indicates that a valid user program is

**            present and can be started.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise. 

**

****************************************************************************************/

blt_bool FlashVerifyChecksum(void)

{

  blt_int32u signature_checksum = 0;

  /* verify the checksum based on how it was written by CpuWriteChecksum() */

  signature_checksum += *((blt_int32u*)(flashLayout[0].sector_start));

  signature_checksum += *((blt_int32u*)(flashLayout[0].sector_start+0x04));

  signature_checksum += *((blt_int32u*)(flashLayout[0].sector_start+0x08));

  signature_checksum += *((blt_int32u*)(flashLayout[0].sector_start+0x0C));

  signature_checksum += *((blt_int32u*)(flashLayout[0].sector_start+0x10));

  signature_checksum += *((blt_int32u*)(flashLayout[0].sector_start+0x14));

  signature_checksum += *((blt_int32u*)(flashLayout[0].sector_start+0x18));

  signature_checksum += *((blt_int32u*)(flashLayout[0].sector_start+FLASH_VECTOR_TABLE_CS_OFFSET));

  /* sum should add up to an unsigned 32-bit value of 0 */

  if (signature_checksum == 0)

  {

    /* checksum okay */

    return BLT_TRUE;

  }

  /* checksum incorrect */

  return BLT_FALSE;

} /*** end of FlashVerifyChecksum ***/

/************************************************************************************//**

** \brief     Finalizes the flash driver operations. There could still be data in

**            the currently active block that needs to be flashed.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise. 

**

****************************************************************************************/

blt_bool FlashDone(void)

{

  /* check if there is still data waiting to be programmed in the boot block */

  if (bootBlockInfo.base_addr != FLASH_INVALID_ADDRESS)

  {

    if (FlashWriteBlock(&bootBlockInfo) == BLT_FALSE)

    {

      return BLT_FALSE;

    }

  }

  /* check if there is still data waiting to be programmed */

  if (blockInfo.base_addr != FLASH_INVALID_ADDRESS)

  {

    if (FlashWriteBlock(&blockInfo) == BLT_FALSE)

    {

      return BLT_FALSE;

    }

  }

  /* still here so all is okay */  

  return BLT_TRUE;

} /*** end of FlashDone ***/

/************************************************************************************//**

** \brief     Obtains the base address of the flash memory available to the user program.

**            This is basically the first address in the flashLayout table.

** \return    Base address.

**

****************************************************************************************/

blt_addr FlashGetUserProgBaseAddress(void)

{

  return flashLayout[0].sector_start;

} /*** end of FlashGetUserProgBaseAddress ***/

/************************************************************************************//**

** \brief     Copies data currently in flash to the block->data and sets the 

**            base address.

** \param     block   Pointer to flash block info structure to operate on.

** \param     address Base address of the block data.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise. 

**

****************************************************************************************/

static blt_bool FlashInitBlock(tFlashBlockInfo *block, blt_addr address)

{

  /* check address alignment */  

  if ((address % FLASH_WRITE_BLOCK_SIZE) != 0)

  {

    return BLT_FALSE;

  }

  /* make sure that we are initializing a new block and not the same one */

  if (block->base_addr == address)

  {

    /* block already initialized, so nothing to do */

    return BLT_TRUE;

  }

  /* set the base address and copies the current data from flash */  

  block->base_addr = address;  

  CpuMemCopy((blt_addr)block->data, address, FLASH_WRITE_BLOCK_SIZE);

  return BLT_TRUE;

} /*** end of FlashInitBlock ***/

/************************************************************************************//**

** \brief     Switches blocks by programming the current one and initializing the

**            next.

** \param     block   Pointer to flash block info structure to operate on.

** \param     base_addr Base address of the next block.

** \return    The pointer of the block info struct that is no being used, or a NULL

**            pointer in case of error.

**

****************************************************************************************/

static tFlashBlockInfo *FlashSwitchBlock(tFlashBlockInfo *block, blt_addr base_addr)

{

  /* check if a switch needs to be made away from the boot block. in this case the boot

   * block shouldn't be written yet, because this is done at the end of the programming

   * session by FlashDone(), this is right after the checksum was written. 

   */

  if (block == &bootBlockInfo)

  {

    /* switch from the boot block to the generic block info structure */

    block = &blockInfo;

  }

  /* check if a switch back into the bootblock is needed. in this case the generic block 

   * doesn't need to be written here yet.

   */

  else if (base_addr == flashLayout[0].sector_start)

  {

    /* switch from the generic block to the boot block info structure */

    block = &bootBlockInfo;

    base_addr = flashLayout[0].sector_start;

  }

  else

  {

    /* need to switch to a new block, so program the current one and init the next */

    if (FlashWriteBlock(block) == BLT_FALSE)

    {

      return BLT_NULL;

    }

  }

  /* initialize tne new block when necessary */

  if (FlashInitBlock(block, base_addr) == BLT_FALSE) 

  {

    return BLT_NULL;

  }

  /* still here to all is okay  */

  return block;

} /*** end of FlashSwitchBlock ***/

/************************************************************************************//**

** \brief     Programming is done per block. This function adds data to the block

**            that is currently collecting data to be written to flash. If the

**            address is outside of the current block, the current block is written

**            to flash an a new block is initialized.

** \param     block   Pointer to flash block info structure to operate on.

** \param     address Flash destination address.

** \param     data    Pointer to the byte array with data.

** \param     len     Number of bytes to add to the block.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise.

**

****************************************************************************************/

static blt_bool FlashAddToBlock(tFlashBlockInfo *block, blt_addr address, 

                                blt_int8u *data, blt_int32u len)

{

  blt_addr   current_base_addr;

  blt_int8u  *dst;

  blt_int8u  *src;

  /* determine the current base address */

  current_base_addr = (address/FLASH_WRITE_BLOCK_SIZE)*FLASH_WRITE_BLOCK_SIZE;

  /* make sure the blockInfo is not uninitialized */

  if (block->base_addr == FLASH_INVALID_ADDRESS)

  {

    /* initialize the blockInfo struct for the current block */

    if (FlashInitBlock(block, current_base_addr) == BLT_FALSE)

    {

      return BLT_FALSE;

    }

  }

  /* check if the new data fits in the current block */

  if (block->base_addr != current_base_addr)

  {

    /* need to switch to a new block, so program the current one and init the next */

    block = FlashSwitchBlock(block, current_base_addr);

    if (block == BLT_NULL)

    {

      return BLT_FALSE;

    }

  }

  /* add the data to the current block, but check for block overflow */

  dst = &(block->data[address - block->base_addr]);

  src = data;

  do

  {

    /* keep the watchdog happy */

    CopService();

    /* buffer overflow? */

    if ((blt_addr)(dst-&(block->data[0])) >= FLASH_WRITE_BLOCK_SIZE)

    {

      /* need to switch to a new block, so program the current one and init the next */

      block = FlashSwitchBlock(block, current_base_addr+FLASH_WRITE_BLOCK_SIZE);

      if (block == BLT_NULL)

      {

        return BLT_FALSE;

      }

      /* reset destination pointer */

      dst = &(block->data[0]);

    }

    /* write the data to the buffer */

    *dst = *src;

    /* update pointers */

    dst++;

    src++;

    /* decrement byte counter */

    len--;

  }

  while (len > 0);

  /* still here so all is good */

  return BLT_TRUE;

} /*** end of FlashAddToBlock ***/

/************************************************************************************//**

** \brief     Programs FLASH_WRITE_BLOCK_SIZE bytes to flash from the block->data

**            array.

** \param     block   Pointer to flash block info structure to operate on.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise.

**

****************************************************************************************/

static blt_bool FlashWriteBlock(tFlashBlockInfo *block)

{

  blt_int8u  sector_num;

  blt_bool   result = BLT_TRUE;

  blt_addr   prog_addr;

  blt_int32u prog_data;

  blt_int32u word_cnt;

  /* check that address is actually within flash */

  sector_num = FlashGetSector(block->base_addr);

  if (sector_num == FLASH_INVALID_SECTOR)

  {

    return BLT_FALSE;

  }

  /* unlock the flash array */

  FLASH_Unlock();

  /* clear pending flags (if any) */  

  FLASH_ClearFlag(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | 

                  FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR|FLASH_FLAG_PGSERR); 

  /* check that the flash peripheral is not busy */

  if (FLASH_GetStatus() == FLASH_BUSY)

  {

    /* lock the flash array again */

    FLASH_Lock(); 

    /* could not perform erase operation */

    return BLT_FALSE;

  }

  /* program all words in the block one by one */

  for (word_cnt=0; word_cnt<(FLASH_WRITE_BLOCK_SIZE/sizeof(blt_int32u)); word_cnt++)

  {

    prog_addr = block->base_addr + (word_cnt * sizeof(blt_int32u));

    prog_data = *(volatile blt_int32u*)(&block->data[word_cnt * sizeof(blt_int32u)]);

    /* keep the watchdog happy */

    CopService();

    /* program the word */

    if (FLASH_ProgramWord(prog_addr, prog_data) != FLASH_COMPLETE)

    {

      result = BLT_FALSE;

      break;

    }

    /* verify that the written data is actually there */

    if (*(volatile blt_int32u*)prog_addr != prog_data)

    {

      result = BLT_FALSE;

      break;

    }

  }

  /* lock the flash array again */

  FLASH_Lock(); 

  /* still here so all is okay */

  return result;

} /*** end of FlashWriteBlock ***/

/************************************************************************************//**

** \brief     Erases the flash sectors from first_sector up until last_sector.

** \param     first_sector First flash sector number.

** \param     last_sector  Last flash sector number.

** \return    BLT_TRUE if successful, BLT_FALSE otherwise.

**

****************************************************************************************/

static blt_bool FlashEraseSectors(blt_int8u first_sector, blt_int8u last_sector)

{

  blt_int8u sector_cnt;

  /* validate the sector numbers */

  if (first_sector > last_sector)

  {

    return BLT_FALSE;

  }

  if ( (first_sector < flashLayout[0].sector_num) || \

       (last_sector > flashLayout[FLASH_TOTAL_SECTORS-1].sector_num) )

  {

    return BLT_FALSE;

  }

  /* unlock the flash array */

  FLASH_Unlock();

  /* clear pending flags (if any) */  

  FLASH_ClearFlag(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | 

                  FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR|FLASH_FLAG_PGSERR); 

  /* check that the flash peripheral is not busy */

  if (FLASH_GetStatus() == FLASH_BUSY)

  {

    /* lock the flash array again */

    FLASH_Lock(); 

    /* could not perform erase operation */

    return BLT_FALSE;

  }

  /* erase all sectors one by one */

  for (sector_cnt=first_sector; sector_cnt<= last_sector; sector_cnt++)

  {

    /* keep the watchdog happy */

    CopService();

    /* submit the sector erase request */

    if (FLASH_EraseSector(flashSectorNumToMask[sector_cnt], VoltageRange_3) != FLASH_COMPLETE)

    {

      /* lock the flash array again */

      FLASH_Lock(); 

      /* could not perform erase operation */

      return BLT_FALSE;

    }

  }

  /* lock the flash array again */

  FLASH_Lock(); 

  /* still here so all went okay */

  return BLT_TRUE;

} /*** end of FlashEraseSectors ***/

/************************************************************************************//**

** \brief     Determines the flash sector the address is in.

** \param     address Address in the flash sector.

** \return    Flash sector number or FLASH_INVALID_SECTOR.

**

****************************************************************************************/

static blt_int8u FlashGetSector(blt_addr address)

{

  blt_int8u sectorIdx;

  /* search through the sectors to find the right one */

  for (sectorIdx = 0; sectorIdx < FLASH_TOTAL_SECTORS; sectorIdx++)

  {

    /* keep the watchdog happy */

    CopService();

    /* is the address in this sector? */

    if ( (address >= flashLayout[sectorIdx].sector_start) && \

         (address < (flashLayout[sectorIdx].sector_start + \

                  flashLayout[sectorIdx].sector_size)) )

    {

      /* return the sector number */

      return flashLayout[sectorIdx].sector_num;

    }

  }

  /* still here so no valid sector found */

  return FLASH_INVALID_SECTOR;

} /*** end of FlashGetSector ***/

/*********************************** end of flash.c ************************************/