amiro-blt / Target / Modules / DiWheelDrive_1-1 / Boot / main.c @ fd101c41
History | View | Annotate | Download (35.957 KB)
| 1 |
/************************************************************************************//** |
|---|---|
| 2 |
* \file Demo\ARMCM3_STM32_Olimex_STM32P103_GCC\Boot\main.c
|
| 3 |
* \brief Bootloader application source file.
|
| 4 |
* \ingroup Boot_ARMCM3_STM32_Olimex_STM32P103_GCC
|
| 5 |
* \internal
|
| 6 |
*----------------------------------------------------------------------------------------
|
| 7 |
* C O P Y R I G H T
|
| 8 |
*----------------------------------------------------------------------------------------
|
| 9 |
* Copyright (c) 2012 by Feaser http://www.feaser.com All rights reserved
|
| 10 |
*
|
| 11 |
*----------------------------------------------------------------------------------------
|
| 12 |
* L I C E N S E
|
| 13 |
*----------------------------------------------------------------------------------------
|
| 14 |
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
|
| 15 |
* modify it under the terms of the GNU General Public License as published by the Free
|
| 16 |
* Software Foundation, either version 3 of the License, or (at your option) any later
|
| 17 |
* version.
|
| 18 |
*
|
| 19 |
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
| 20 |
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
|
| 21 |
* PURPOSE. See the GNU General Public License for more details.
|
| 22 |
*
|
| 23 |
* You should have received a copy of the GNU General Public License along with OpenBLT.
|
| 24 |
* If not, see <http://www.gnu.org/licenses/>.
|
| 25 |
*
|
| 26 |
* A special exception to the GPL is included to allow you to distribute a combined work
|
| 27 |
* that includes OpenBLT without being obliged to provide the source code for any
|
| 28 |
* proprietary components. The exception text is included at the bottom of the license
|
| 29 |
* file <license.html>.
|
| 30 |
*
|
| 31 |
* \endinternal
|
| 32 |
****************************************************************************************/
|
| 33 |
|
| 34 |
/****************************************************************************************
|
| 35 |
* Include files
|
| 36 |
****************************************************************************************/
|
| 37 |
#include "boot.h" /* bootloader generic header */ |
| 38 |
#include "timer.h" |
| 39 |
#include "ARMCM3_STM32/types.h" |
| 40 |
#include "AMiRo/amiroblt.h" |
| 41 |
#include "helper.h" |
| 42 |
#include "iodef.h" |
| 43 |
|
| 44 |
/****************************************************************************************
|
| 45 |
* Defines
|
| 46 |
****************************************************************************************/
|
| 47 |
#define RESET_TIMEOUT_MS 100 |
| 48 |
|
| 49 |
/****************************************************************************************
|
| 50 |
* Function prototypes
|
| 51 |
****************************************************************************************/
|
| 52 |
static void Init(void); |
| 53 |
|
| 54 |
static void initGpio(); |
| 55 |
static void initExti(); |
| 56 |
void configGpioForShutdown();
|
| 57 |
|
| 58 |
ErrorStatus handleColdReset(); |
| 59 |
ErrorStatus handleUartWakeup(); |
| 60 |
ErrorStatus handleAccelWakeup(); |
| 61 |
|
| 62 |
ErrorStatus shutdownDisambiguationProcedure(const uint8_t type);
|
| 63 |
void shutdownToTransportation(const blt_bool exec_disambiguation); |
| 64 |
void shutdownToDeepsleep(const blt_bool exec_disambiguation); |
| 65 |
void shutdownToHibernate(const blt_bool exec_disambiguation); |
| 66 |
void shutdownAndRestart(const blt_bool exec_disambiguation); |
| 67 |
|
| 68 |
volatile blBackupRegister_t backup_reg;
|
| 69 |
|
| 70 |
/****************************************************************************************
|
| 71 |
* Callback configuration
|
| 72 |
****************************************************************************************/
|
| 73 |
void blCallbackShutdownTransportation(void); |
| 74 |
void blCallbackShutdownDeepsleep(void); |
| 75 |
void blCallbackShutdownHibernate(void); |
| 76 |
void blCallbackShutdownRestart(void); |
| 77 |
void blCallbackHandleShutdownRequest(void); |
| 78 |
|
| 79 |
const blCallbackTable_t cbtable __attribute__ ((section ("_callback_table"))) = { |
| 80 |
.magicNumber = BL_MAGIC_NUMBER, |
| 81 |
.vBootloader = {BL_VERSION_ID_AMiRoBLT_Release, BL_VERSION_MAJOR, BL_VERSION_MINOR, 1},
|
| 82 |
.vSSSP = {BL_VERSION_ID_SSSP, BL_SSSP_VERSION_MAJOR, BL_SSSP_VERSION_MINOR, 0},
|
| 83 |
.vCompiler = {BL_VERSION_ID_GCC, __GNUC__, __GNUC_MINOR__, __GNUC_PATCHLEVEL__}, // currently only GCC is supported
|
| 84 |
.cbShutdownHibernate = blCallbackShutdownHibernate, |
| 85 |
.cbShutdownDeepsleep = blCallbackShutdownDeepsleep, |
| 86 |
.cbShutdownTransportation = blCallbackShutdownTransportation, |
| 87 |
.cbShutdownRestart = blCallbackShutdownRestart, |
| 88 |
.cbHandleShutdownRequest = blCallbackHandleShutdownRequest, |
| 89 |
.cb5 = (void*)0, |
| 90 |
.cb6 = (void*)0, |
| 91 |
.cb7 = (void*)0, |
| 92 |
.cb8 = (void*)0, |
| 93 |
.cb9 = (void*)0, |
| 94 |
.cb10 = (void*)0, |
| 95 |
.cb11 = (void*)0 |
| 96 |
}; |
| 97 |
|
| 98 |
|
| 99 |
/************************************************************************************//** |
| 100 |
** \brief This is the entry point for the bootloader application and is called
|
| 101 |
** by the reset interrupt vector after the C-startup routines executed.
|
| 102 |
** \return Program return code.
|
| 103 |
**
|
| 104 |
****************************************************************************************/
|
| 105 |
int main(void) |
| 106 |
{
|
| 107 |
/* initialize the microcontroller */
|
| 108 |
Init(); |
| 109 |
|
| 110 |
/* activate some required clocks */
|
| 111 |
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); |
| 112 |
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD, ENABLE); |
| 113 |
|
| 114 |
/* initialize GPIOs and EXTI lines */
|
| 115 |
initGpio(); |
| 116 |
setLed(BLT_TRUE); |
| 117 |
initExti(); |
| 118 |
|
| 119 |
/* initialize the timer */
|
| 120 |
TimerInit(); |
| 121 |
|
| 122 |
/* detect the primary reason for this wakeup/restart */
|
| 123 |
backup_reg.wakeup_pri_reason = |
| 124 |
((RCC_GetFlagStatus(RCC_FLAG_LPWRRST) == SET) ? BL_WAKEUP_PRI_RSN_LPWRRST : 0) |
|
| 125 |
((RCC_GetFlagStatus(RCC_FLAG_WWDGRST) == SET) ? BL_WAKEUP_PRI_RSN_WWDGRST : 0) |
|
| 126 |
((RCC_GetFlagStatus(RCC_FLAG_IWDGRST) == SET) ? BL_WAKEUP_PRI_RSN_IWDGRST : 0) |
|
| 127 |
((RCC_GetFlagStatus(RCC_FLAG_SFTRST) == SET) ? BL_WAKEUP_PRI_RSN_SFTRST : 0) |
|
| 128 |
((RCC_GetFlagStatus(RCC_FLAG_PORRST) == SET) ? BL_WAKEUP_PRI_RSN_PORRST : 0) |
|
| 129 |
((RCC_GetFlagStatus(RCC_FLAG_PINRST) == SET) ? BL_WAKEUP_PRI_RSN_PINRST : 0) |
|
| 130 |
((PWR_GetFlagStatus(PWR_FLAG_WU) == SET) ? BL_WAKEUP_PRI_RSN_WKUP : 0);
|
| 131 |
|
| 132 |
/* when woken from standby mode, detect the secondary reason for thiswakeup/reset */
|
| 133 |
if ( (backup_reg.wakeup_pri_reason & BL_WAKEUP_PRI_RSN_WKUP) && (PWR_GetFlagStatus(PWR_FLAG_SB) == SET) ) {
|
| 134 |
if (GPIO_ReadInputDataBit(SYS_UART_UP_GPIO, SYS_UART_UP_PIN) == Bit_SET) {
|
| 135 |
backup_reg.wakeup_sec_reason = BL_WAKEUP_SEC_RSN_UART; |
| 136 |
} else {
|
| 137 |
backup_reg.wakeup_sec_reason = BL_WAKEUP_SEC_RSN_ACCEL; |
| 138 |
} |
| 139 |
} else {
|
| 140 |
backup_reg.wakeup_sec_reason = BL_WAKEUP_SEC_RSN_UNKNOWN; |
| 141 |
} |
| 142 |
|
| 143 |
/* clear the flags */
|
| 144 |
RCC_ClearFlag(); |
| 145 |
PWR_ClearFlag(PWR_FLAG_WU); |
| 146 |
|
| 147 |
setLed(BLT_FALSE); |
| 148 |
|
| 149 |
/* wait 1ms for all signals to become stable */
|
| 150 |
msleep(1);
|
| 151 |
|
| 152 |
/* handle different wakeup/reset reasons */
|
| 153 |
ErrorStatus status = ERROR; |
| 154 |
if (backup_reg.wakeup_pri_reason & BL_WAKEUP_PRI_RSN_WKUP) {
|
| 155 |
/* the system was woken via WKUP pin */
|
| 156 |
/* differenciate between two wakeup types */
|
| 157 |
switch (backup_reg.wakeup_sec_reason) {
|
| 158 |
case BL_WAKEUP_SEC_RSN_UART:
|
| 159 |
status = handleUartWakeup(); |
| 160 |
break;
|
| 161 |
case BL_WAKEUP_SEC_RSN_ACCEL:
|
| 162 |
status = handleAccelWakeup(); |
| 163 |
break;
|
| 164 |
default:
|
| 165 |
status = ERROR; |
| 166 |
break;
|
| 167 |
} |
| 168 |
} else if (backup_reg.wakeup_pri_reason & BL_WAKEUP_PRI_RSN_PINRST) { |
| 169 |
/* system was woken via NRST pin */
|
| 170 |
status = handleColdReset(); |
| 171 |
} else {
|
| 172 |
/* system was woken/reset for an unexpected reason */
|
| 173 |
blinkSOS(1);
|
| 174 |
status = handleColdReset(); |
| 175 |
} |
| 176 |
|
| 177 |
/* if something wehnt wrong, signal this failure */
|
| 178 |
if (status != SUCCESS) {
|
| 179 |
blinkSOSinf(); |
| 180 |
} |
| 181 |
|
| 182 |
return 0; |
| 183 |
} /*** end of main ***/
|
| 184 |
|
| 185 |
|
| 186 |
/************************************************************************************//** |
| 187 |
** \brief Initializes the microcontroller.
|
| 188 |
** \return none.
|
| 189 |
**
|
| 190 |
****************************************************************************************/
|
| 191 |
static void Init(void) |
| 192 |
{
|
| 193 |
volatile blt_int32u StartUpCounter = 0, HSEStatus = 0; |
| 194 |
blt_int32u pll_multiplier; |
| 195 |
#if (BOOT_FILE_LOGGING_ENABLE > 0) && (BOOT_COM_UART_ENABLE == 0) |
| 196 |
GPIO_InitTypeDef GPIO_InitStruct; |
| 197 |
USART_InitTypeDef USART_InitStruct; |
| 198 |
#endif
|
| 199 |
|
| 200 |
/* reset the RCC clock configuration to the default reset state (for debug purpose) */
|
| 201 |
/* set HSION bit */
|
| 202 |
RCC->CR |= (blt_int32u)0x00000001;
|
| 203 |
/* reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
|
| 204 |
RCC->CFGR &= (blt_int32u)0xF8FF0000;
|
| 205 |
/* reset HSEON, CSSON and PLLON bits */
|
| 206 |
RCC->CR &= (blt_int32u)0xFEF6FFFF;
|
| 207 |
/* reset HSEBYP bit */
|
| 208 |
RCC->CR &= (blt_int32u)0xFFFBFFFF;
|
| 209 |
/* reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
|
| 210 |
RCC->CFGR &= (blt_int32u)0xFF80FFFF;
|
| 211 |
/* disable all interrupts and clear pending bits */
|
| 212 |
RCC->CIR = 0x009F0000;
|
| 213 |
/* enable HSE */
|
| 214 |
RCC->CR |= ((blt_int32u)RCC_CR_HSEON); |
| 215 |
/* wait till HSE is ready and if Time out is reached exit */
|
| 216 |
do
|
| 217 |
{
|
| 218 |
HSEStatus = RCC->CR & RCC_CR_HSERDY; |
| 219 |
StartUpCounter++; |
| 220 |
} |
| 221 |
while((HSEStatus == 0) && (StartUpCounter != 1500)); |
| 222 |
/* check if time out was reached */
|
| 223 |
if ((RCC->CR & RCC_CR_HSERDY) == RESET)
|
| 224 |
{
|
| 225 |
/* cannot continue when HSE is not ready */
|
| 226 |
ASSERT_RT(BLT_FALSE); |
| 227 |
} |
| 228 |
/* enable flash prefetch buffer */
|
| 229 |
FLASH->ACR |= FLASH_ACR_PRFTBE; |
| 230 |
/* reset flash wait state configuration to default 0 wait states */
|
| 231 |
FLASH->ACR &= (blt_int32u)((blt_int32u)~FLASH_ACR_LATENCY); |
| 232 |
#if (BOOT_CPU_SYSTEM_SPEED_KHZ > 48000) |
| 233 |
/* configure 2 flash wait states */
|
| 234 |
FLASH->ACR |= (blt_int32u)FLASH_ACR_LATENCY_2; |
| 235 |
#elif (BOOT_CPU_SYSTEM_SPEED_KHZ > 24000) |
| 236 |
/* configure 1 flash wait states */
|
| 237 |
FLASH->ACR |= (blt_int32u)FLASH_ACR_LATENCY_1; |
| 238 |
#endif
|
| 239 |
/* HCLK = SYSCLK */
|
| 240 |
RCC->CFGR |= (blt_int32u)RCC_CFGR_HPRE_DIV1; |
| 241 |
/* PCLK2 = HCLK/2 */
|
| 242 |
RCC->CFGR |= (blt_int32u)RCC_CFGR_PPRE2_DIV2; |
| 243 |
/* PCLK1 = HCLK/2 */
|
| 244 |
RCC->CFGR |= (blt_int32u)RCC_CFGR_PPRE1_DIV2; |
| 245 |
/* reset PLL configuration */
|
| 246 |
RCC->CFGR &= (blt_int32u)((blt_int32u)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | \ |
| 247 |
RCC_CFGR_PLLMULL)); |
| 248 |
/* assert that the pll_multiplier is between 2 and 16 */
|
| 249 |
ASSERT_CT((BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ) >= 2);
|
| 250 |
ASSERT_CT((BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ) <= 16);
|
| 251 |
/* calculate multiplier value */
|
| 252 |
pll_multiplier = BOOT_CPU_SYSTEM_SPEED_KHZ/BOOT_CPU_XTAL_SPEED_KHZ; |
| 253 |
/* convert to register value */
|
| 254 |
pll_multiplier = (blt_int32u)((pll_multiplier - 2) << 18); |
| 255 |
/* set the PLL multiplier and clock source */
|
| 256 |
RCC->CFGR |= (blt_int32u)(RCC_CFGR_PLLSRC_HSE | pll_multiplier); |
| 257 |
/* enable PLL */
|
| 258 |
RCC->CR |= RCC_CR_PLLON; |
| 259 |
/* wait till PLL is ready */
|
| 260 |
while((RCC->CR & RCC_CR_PLLRDY) == 0) |
| 261 |
{
|
| 262 |
} |
| 263 |
/* select PLL as system clock source */
|
| 264 |
RCC->CFGR &= (blt_int32u)((blt_int32u)~(RCC_CFGR_SW)); |
| 265 |
RCC->CFGR |= (blt_int32u)RCC_CFGR_SW_PLL; |
| 266 |
/* wait till PLL is used as system clock source */
|
| 267 |
while ((RCC->CFGR & (blt_int32u)RCC_CFGR_SWS) != (blt_int32u)0x08) |
| 268 |
{
|
| 269 |
} |
| 270 |
|
| 271 |
/* remap JTAG pins */
|
| 272 |
RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); |
| 273 |
AFIO->MAPR &= ~(blt_int32u)((blt_int32u)0x7 << 24); |
| 274 |
AFIO->MAPR |= (blt_int32u)((blt_int32u)0x2 << 24); |
| 275 |
/* all input */
|
| 276 |
|
| 277 |
#if (BOOT_COM_CAN_ENABLE > 0 || BOOT_GATE_CAN_ENABLE > 0) |
| 278 |
/* enable clocks for CAN transmitter and receiver pins (GPIOB and AFIO) */
|
| 279 |
RCC->APB2ENR |= (blt_int32u)(0x00000004 | 0x00000001); |
| 280 |
/* configure CAN Rx (GPIOA11) as alternate function input */
|
| 281 |
/* first reset the configuration */
|
| 282 |
GPIOA->CRH &= ~(blt_int32u)((blt_int32u)0xf << 12); |
| 283 |
/* CNF8[1:0] = %01 and MODE8[1:0] = %00 */
|
| 284 |
GPIOA->CRH |= (blt_int32u)((blt_int32u)0x4 << 12); |
| 285 |
/* configure CAN Tx (GPIOA12) as alternate function push-pull */
|
| 286 |
/* first reset the configuration */
|
| 287 |
GPIOA->CRH &= ~(blt_int32u)((blt_int32u)0xf << 16); |
| 288 |
/* CNF9[1:0] = %11 and MODE9[1:0] = %11 */
|
| 289 |
GPIOA->CRH |= (blt_int32u)((blt_int32u)0xb << 16); |
| 290 |
|
| 291 |
/* remap CAN1 pins to PortA */
|
| 292 |
AFIO->MAPR &= ~(blt_int32u)((blt_int32u)0x3 << 13); |
| 293 |
AFIO->MAPR |= (blt_int32u)((blt_int32u)0x0 << 13); |
| 294 |
#endif
|
| 295 |
|
| 296 |
#if (BOOT_COM_UART_ENABLE > 0 || BOOT_GATE_UART_ENABLE > 0) |
| 297 |
/* enable clocks for USART1 peripheral, transmitter and receiver pins (GPIOA and AFIO) */
|
| 298 |
RCC->APB2ENR |= (blt_int32u)(0x00004000 | 0x00000004 | 0x00000001); |
| 299 |
/* configure USART1 Tx (GPIOA9) as alternate function push-pull */
|
| 300 |
/* first reset the configuration */
|
| 301 |
GPIOA->CRH &= ~(blt_int32u)((blt_int32u)0xf << 4); |
| 302 |
/* CNF2[1:0] = %10 and MODE2[1:0] = %11 */
|
| 303 |
GPIOA->CRH |= (blt_int32u)((blt_int32u)0xb << 4); |
| 304 |
/* configure USART1 Rx (GPIOA10) as alternate function input floating */
|
| 305 |
/* first reset the configuration */
|
| 306 |
GPIOA->CRH &= ~(blt_int32u)((blt_int32u)0xf << 8); |
| 307 |
/* CNF2[1:0] = %01 and MODE2[1:0] = %00 */
|
| 308 |
GPIOA->CRH |= (blt_int32u)((blt_int32u)0x4 << 8); |
| 309 |
#endif
|
| 310 |
|
| 311 |
} /*** end of Init ***/
|
| 312 |
|
| 313 |
/*
|
| 314 |
* Initializes all GPIO used by the bootloader
|
| 315 |
*/
|
| 316 |
static void initGpio() { |
| 317 |
GPIO_InitTypeDef gpio_init; |
| 318 |
|
| 319 |
/*
|
| 320 |
* OUTPUTS
|
| 321 |
*/
|
| 322 |
|
| 323 |
/* initialize LED and push it up (inactive) */
|
| 324 |
GPIO_SetBits(LED_GPIO, LED_PIN); |
| 325 |
gpio_init.GPIO_Pin = LED_PIN; |
| 326 |
gpio_init.GPIO_Mode = GPIO_Mode_Out_PP; |
| 327 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 328 |
GPIO_Init(LED_GPIO, &gpio_init); |
| 329 |
|
| 330 |
/* initialize SYS_PD_N and let it go (inactive) */
|
| 331 |
GPIO_SetBits(SYS_PD_N_GPIO, SYS_PD_N_PIN); |
| 332 |
gpio_init.GPIO_Pin = SYS_PD_N_PIN; |
| 333 |
gpio_init.GPIO_Mode = GPIO_Mode_Out_OD; |
| 334 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 335 |
GPIO_Init(SYS_PD_N_GPIO, &gpio_init); |
| 336 |
|
| 337 |
/* initialize SYS_SYNC_N and pull it down (active) */
|
| 338 |
GPIO_ResetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 339 |
gpio_init.GPIO_Pin = SYS_SYNC_N_PIN; |
| 340 |
gpio_init.GPIO_Mode = GPIO_Mode_Out_OD; |
| 341 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 342 |
GPIO_Init(SYS_SYNC_N_GPIO, &gpio_init); |
| 343 |
|
| 344 |
/* initialize SYS_WARMST_N and let it go (active) */
|
| 345 |
GPIO_SetBits(SYS_WARMRST_N_GPIO, SYS_WARMRST_N_PIN); |
| 346 |
gpio_init.GPIO_Pin = SYS_WARMRST_N_PIN; |
| 347 |
gpio_init.GPIO_Mode = GPIO_Mode_Out_OD; |
| 348 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 349 |
GPIO_Init(SYS_WARMRST_N_GPIO, &gpio_init); |
| 350 |
|
| 351 |
/* initialize SYS_UART_UP and let it go (inactive) */
|
| 352 |
GPIO_SetBits(SYS_UART_UP_GPIO, SYS_UART_UP_PIN); |
| 353 |
gpio_init.GPIO_Pin = SYS_UART_UP_PIN; |
| 354 |
gpio_init.GPIO_Mode = GPIO_Mode_Out_OD; |
| 355 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 356 |
GPIO_Init(SYS_UART_UP_GPIO, &gpio_init); |
| 357 |
|
| 358 |
/* initialize PATH_DCEN and pull it down (inactive) */
|
| 359 |
GPIO_ResetBits(PATH_DCEN_GPIO, PATH_DCEN_PIN); |
| 360 |
gpio_init.GPIO_Pin = PATH_DCEN_PIN; |
| 361 |
gpio_init.GPIO_Mode = GPIO_Mode_Out_PP; |
| 362 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 363 |
GPIO_Init(PATH_DCEN_GPIO, &gpio_init); |
| 364 |
|
| 365 |
/*
|
| 366 |
* INPUTS
|
| 367 |
*/
|
| 368 |
|
| 369 |
/* initialize the input ACCEL_INT_N */
|
| 370 |
gpio_init.GPIO_Pin = ACCEL_INT_N_PIN; |
| 371 |
gpio_init.GPIO_Mode = GPIO_Mode_IN_FLOATING; |
| 372 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 373 |
GPIO_Init(ACCEL_INT_N_GPIO, &gpio_init); |
| 374 |
|
| 375 |
return;
|
| 376 |
} /*** end of initGpio ***/
|
| 377 |
|
| 378 |
/*
|
| 379 |
* Initialize all EXTI lines
|
| 380 |
*/
|
| 381 |
static void initExti() { |
| 382 |
/* configure EXTI lines */
|
| 383 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource1); // SYS_SYNC_N
|
| 384 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOD, GPIO_PinSource2); // SYS_WARMRST_N
|
| 385 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource3); // PATH_DCSTAT
|
| 386 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource5); // COMPASS_DRDY
|
| 387 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource8); // SYS_PD_N
|
| 388 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource9); // SYS_REG_EN
|
| 389 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource12); // IR_INT
|
| 390 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource13); // GYRO_DRDY
|
| 391 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource14); // SYS_UART_UP
|
| 392 |
GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource15); // ACCEL_INT_N
|
| 393 |
|
| 394 |
return;
|
| 395 |
} |
| 396 |
|
| 397 |
/*
|
| 398 |
* Signals, which type of low-power mode the system shall enter after the shutdown sequence.
|
| 399 |
*/
|
| 400 |
ErrorStatus shutdownDisambiguationProcedure(const uint8_t type) {
|
| 401 |
GPIO_SetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 402 |
ErrorStatus ret_val = ERROR; |
| 403 |
|
| 404 |
switch (type) {
|
| 405 |
case BL_SHUTDOWN_PRI_RSN_UNKNOWN:
|
| 406 |
case BL_SHUTDOWN_PRI_RSN_HIBERNATE:
|
| 407 |
case BL_SHUTDOWN_PRI_RSN_DEEPSLEEP:
|
| 408 |
case BL_SHUTDOWN_PRI_RSN_TRANSPORT:
|
| 409 |
{
|
| 410 |
// broadcast a number of pulses, depending on the argument
|
| 411 |
uint8_t pulse_counter = 0;
|
| 412 |
for (pulse_counter = 0; pulse_counter < type; ++pulse_counter) { |
| 413 |
msleep(1);
|
| 414 |
GPIO_ResetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 415 |
msleep(1);
|
| 416 |
GPIO_SetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 417 |
} |
| 418 |
// wait for timeout
|
| 419 |
msleep(10);
|
| 420 |
ret_val = SUCCESS; |
| 421 |
break;
|
| 422 |
} |
| 423 |
case BL_SHUTDOWN_PRI_RSN_RESTART:
|
| 424 |
{
|
| 425 |
// since there is no ambiguity for restart requests, no pulses are generated
|
| 426 |
msleep(10);
|
| 427 |
ret_val = SUCCESS; |
| 428 |
break;
|
| 429 |
} |
| 430 |
default:
|
| 431 |
ret_val = ERROR; |
| 432 |
break;
|
| 433 |
} |
| 434 |
|
| 435 |
return ret_val;
|
| 436 |
} /*** end of shutdownDisambiguationProcedure ***/
|
| 437 |
|
| 438 |
/*
|
| 439 |
* Final shutdown of the system to enter transportation mode.
|
| 440 |
*/
|
| 441 |
void shutdownToTransportation(const blt_bool exec_disambiguation) { |
| 442 |
/* configure some criticpal GPIOs as input
|
| 443 |
* This is required, because otherwise some hardware might be powered through these signals */
|
| 444 |
configGpioForShutdown(); |
| 445 |
|
| 446 |
/* turn off the motors */
|
| 447 |
GPIO_ResetBits(POWER_EN_GPIO, POWER_EN_PIN); |
| 448 |
|
| 449 |
/* deactivate the WKUP pin */
|
| 450 |
PWR_WakeUpPinCmd(DISABLE); |
| 451 |
|
| 452 |
/* deactivate any RTC related events */
|
| 453 |
RTC_ITConfig(RTC_IT_ALR | RTC_IT_OW | RTC_IT_SEC, DISABLE); |
| 454 |
RTC_ClearFlag(~0);
|
| 455 |
|
| 456 |
/* disable the IWDG */
|
| 457 |
IWDG_ReloadCounter(); |
| 458 |
|
| 459 |
/* wait for all boards to be ready for shutdown */
|
| 460 |
GPIO_SetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 461 |
if (GPIO_ReadInputDataBit(SYS_REG_EN_GPIO, SYS_REG_EN_PIN) == Bit_SET) {
|
| 462 |
// this must skipped if the pullup voltage (VIO3.3) is not active
|
| 463 |
setLed(BLT_TRUE); |
| 464 |
waitForSignal(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN, Bit_SET); |
| 465 |
setLed(BLT_FALSE); |
| 466 |
} |
| 467 |
|
| 468 |
if (exec_disambiguation == BLT_TRUE) {
|
| 469 |
/* execute disambiguation procedure and signal all modules to enter transportation mode */
|
| 470 |
if (shutdownDisambiguationProcedure(BL_SHUTDOWN_PRI_RSN_TRANSPORT) != SUCCESS) {
|
| 471 |
blinkSOS(1);
|
| 472 |
msleep(10);
|
| 473 |
} |
| 474 |
} |
| 475 |
|
| 476 |
/* morse 'OK' via the LED to signal that shutdown was successful */
|
| 477 |
blinkOK(1);
|
| 478 |
|
| 479 |
/* enter standby mode */
|
| 480 |
PWR_EnterSTANDBYMode(); |
| 481 |
|
| 482 |
return;
|
| 483 |
} /*** end of shutdownToTransportation ***/
|
| 484 |
|
| 485 |
/*
|
| 486 |
* Final shutdown of the system to enter deepseleep mode.
|
| 487 |
*/
|
| 488 |
void shutdownToDeepsleep(const blt_bool exec_disambiguation) { |
| 489 |
/* configure some criticpal GPIOs as input
|
| 490 |
* This is required, because otherwise some hardware might be powered through these signals */
|
| 491 |
configGpioForShutdown(); |
| 492 |
|
| 493 |
/* turn off the motors */
|
| 494 |
GPIO_ResetBits(POWER_EN_GPIO, POWER_EN_PIN); |
| 495 |
|
| 496 |
/* deactivate the WKUP pin */
|
| 497 |
PWR_WakeUpPinCmd(ENABLE); |
| 498 |
|
| 499 |
/*
|
| 500 |
* Configuration of RTC and IWDG belongs to the OS.
|
| 501 |
*/
|
| 502 |
|
| 503 |
/* wait for all boards to be ready for shutdown */
|
| 504 |
GPIO_SetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 505 |
if (GPIO_ReadInputDataBit(SYS_REG_EN_GPIO, SYS_REG_EN_PIN) == Bit_SET) {
|
| 506 |
// this must skipped if the pullup voltage (VIO3.3) is not active
|
| 507 |
setLed(BLT_TRUE); |
| 508 |
waitForSignal(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN, Bit_SET); |
| 509 |
setLed(BLT_FALSE); |
| 510 |
} |
| 511 |
|
| 512 |
if (exec_disambiguation == BLT_TRUE) {
|
| 513 |
/* execute disambiguation procedure and signal all modules to enter deepsleep mode */
|
| 514 |
if (shutdownDisambiguationProcedure(BL_SHUTDOWN_PRI_RSN_DEEPSLEEP) != SUCCESS) {
|
| 515 |
blinkSOS(1);
|
| 516 |
msleep(10);
|
| 517 |
} |
| 518 |
} |
| 519 |
|
| 520 |
/* morse 'OK' via the LED to signal that shutdown was successful */
|
| 521 |
blinkOK(1);
|
| 522 |
|
| 523 |
/* enter standby mode */
|
| 524 |
PWR_EnterSTANDBYMode(); |
| 525 |
|
| 526 |
return;
|
| 527 |
} /*** end of shutdownToDeepsleep ***/
|
| 528 |
|
| 529 |
/*
|
| 530 |
* Final shutdown of the system to enter hibernate mode.
|
| 531 |
*/
|
| 532 |
void shutdownToHibernate(const blt_bool exec_disambiguation) { |
| 533 |
/* configure some criticpal GPIOs as input
|
| 534 |
* This is required, because otherwise some hardware might be powered through these signals */
|
| 535 |
configGpioForShutdown(); |
| 536 |
|
| 537 |
/* turn off the motors */
|
| 538 |
GPIO_ResetBits(POWER_EN_GPIO, POWER_EN_PIN); |
| 539 |
|
| 540 |
/* deactivate the WKUP pin */
|
| 541 |
PWR_WakeUpPinCmd(ENABLE); |
| 542 |
|
| 543 |
/*
|
| 544 |
* Configuration of RTC and IWDG belongs to the OS.
|
| 545 |
*/
|
| 546 |
|
| 547 |
/* wait for all boards to be ready for shutdown */
|
| 548 |
GPIO_SetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 549 |
if (GPIO_ReadInputDataBit(SYS_REG_EN_GPIO, SYS_REG_EN_PIN) == Bit_SET) {
|
| 550 |
// this must skipped if the pullup voltage (VIO3.3) is not active
|
| 551 |
setLed(BLT_TRUE); |
| 552 |
waitForSignal(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN, Bit_SET); |
| 553 |
setLed(BLT_FALSE); |
| 554 |
} |
| 555 |
|
| 556 |
if (exec_disambiguation == BLT_TRUE) {
|
| 557 |
/* execute disambiguation procedure and signal all modules to enter deepsleep mode */
|
| 558 |
if (shutdownDisambiguationProcedure(BL_SHUTDOWN_PRI_RSN_HIBERNATE) != SUCCESS) {
|
| 559 |
blinkSOS(1);
|
| 560 |
msleep(10);
|
| 561 |
} |
| 562 |
} |
| 563 |
|
| 564 |
/* morse 'OK' via the LED to signal that shutdown was successful */
|
| 565 |
blinkOK(1);
|
| 566 |
|
| 567 |
/* enter standby mode */
|
| 568 |
PWR_EnterSTANDBYMode(); |
| 569 |
|
| 570 |
return;
|
| 571 |
} /* end of shutdownToHibernate ***/
|
| 572 |
|
| 573 |
/*
|
| 574 |
* Final shutdown of the system and restart.
|
| 575 |
*/
|
| 576 |
void shutdownAndRestart(const blt_bool exec_disambiguation) { |
| 577 |
/* configure some criticpal GPIOs as input
|
| 578 |
* This is required, because otherwise some hardware might be powered through these signals */
|
| 579 |
configGpioForShutdown(); |
| 580 |
|
| 581 |
/* turn off the motors */
|
| 582 |
GPIO_ResetBits(POWER_EN_GPIO, POWER_EN_PIN); |
| 583 |
|
| 584 |
/* prepare for low-power mode */
|
| 585 |
PWR_WakeUpPinCmd(DISABLE); // disable WKUP pin
|
| 586 |
RTC_ITConfig(RTC_IT_ALR | RTC_IT_OW | RTC_IT_SEC, DISABLE); // unset RTC events
|
| 587 |
RTC_ClearFlag(~0); // clear pending RTC events |
| 588 |
IWDG_ReloadCounter(); // disable IWDG
|
| 589 |
|
| 590 |
/* wait for all boards to be ready for shutdown */
|
| 591 |
GPIO_SetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 592 |
if (GPIO_ReadInputDataBit(SYS_REG_EN_GPIO, SYS_REG_EN_PIN) == Bit_SET) {
|
| 593 |
// this must skipped if the pullup voltage (VIO3.3) is not active
|
| 594 |
setLed(BLT_TRUE); |
| 595 |
waitForSignal(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN, Bit_SET); |
| 596 |
setLed(BLT_FALSE); |
| 597 |
} |
| 598 |
|
| 599 |
if (exec_disambiguation == BLT_TRUE) {
|
| 600 |
/* execute disambiguation procedure and signal all modules to restart in default mode */
|
| 601 |
if (shutdownDisambiguationProcedure(BL_SHUTDOWN_PRI_RSN_RESTART) != SUCCESS) {
|
| 602 |
blinkSOS(1);
|
| 603 |
msleep(10);
|
| 604 |
} |
| 605 |
} |
| 606 |
|
| 607 |
/* morse 'OK' via the LED to signal that shutdown was successful */
|
| 608 |
blinkOK(1);
|
| 609 |
|
| 610 |
/* enter standby mode */
|
| 611 |
PWR_EnterSTANDBYMode(); |
| 612 |
|
| 613 |
/*
|
| 614 |
* Even though this module will not restart the system by its own, the PowerManagement will reset the system.
|
| 615 |
*/
|
| 616 |
|
| 617 |
return;
|
| 618 |
} /*** end of shutdownAndRestart***/
|
| 619 |
|
| 620 |
/*
|
| 621 |
* Configures some GPIO pins as inputs for safety reasons.
|
| 622 |
* Under certain circumstances, these pins might power hardware that is supposed to be shut down.
|
| 623 |
*/
|
| 624 |
void configGpioForShutdown() {
|
| 625 |
/* setup the configuration */
|
| 626 |
GPIO_InitTypeDef gpio_init; |
| 627 |
gpio_init.GPIO_Mode = GPIO_Mode_IN_FLOATING; |
| 628 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 629 |
|
| 630 |
/* configure SYS_UART_TX */
|
| 631 |
gpio_init.GPIO_Pin = SYS_UART_TX_PIN; |
| 632 |
GPIO_Init(SYS_UART_TX_GPIO, &gpio_init); |
| 633 |
|
| 634 |
/* configure CAN_TX */
|
| 635 |
gpio_init.GPIO_Pin = CAN_TX_PIN; |
| 636 |
GPIO_Init(CAN_TX_GPIO, &gpio_init); |
| 637 |
|
| 638 |
/* configure all MOTION (SPI) signals */
|
| 639 |
gpio_init.GPIO_Pin = MOTION_SCLK_PIN; |
| 640 |
GPIO_Init(MOTION_SCLK_GPIO, &gpio_init); |
| 641 |
gpio_init.GPIO_Pin = MOTION_MISO_PIN; |
| 642 |
GPIO_Init(MOTION_MISO_GPIO, &gpio_init); |
| 643 |
gpio_init.GPIO_Pin = MOTION_MOSI_PIN; |
| 644 |
GPIO_Init(MOTION_MOSI_GPIO, &gpio_init); |
| 645 |
gpio_init.GPIO_Pin = ACCEL_SS_N_PIN; |
| 646 |
GPIO_Init(ACCEL_SS_N_GPIO, &gpio_init); |
| 647 |
gpio_init.GPIO_Pin = GYRO_SS_N_PIN; |
| 648 |
GPIO_Init(GYRO_SS_N_GPIO, &gpio_init); |
| 649 |
|
| 650 |
return;
|
| 651 |
} /*** end of configGpioForShutdown ***/
|
| 652 |
|
| 653 |
/*
|
| 654 |
* System was reset via the NRST pin or the reason could not be detected.
|
| 655 |
* In this case, there are three possibilities how to act:
|
| 656 |
* 1) When the SYS_WARMRST_N signal becomes inactive, flashing mode is entered and the system will try to load the OS.
|
| 657 |
* 2) When the SYS_UART_UP signal becomes active (low), the system will enter hibernate mode to enable charging via the pins.
|
| 658 |
* 3) If none of both happens and a timeout occurs, the system enters deepsleep mode.
|
| 659 |
*/
|
| 660 |
ErrorStatus handleColdReset() {
|
| 661 |
/* wait until either the SYS_WARMRST_N signal goes up, or SYS_UART_UP goes down */
|
| 662 |
enum CRST_SIG {CRST_SIG_SYS_WARMRST_N,
|
| 663 |
CRST_SIG_SYS_UART_UP, |
| 664 |
CRST_SIG_TIMEOUT |
| 665 |
} sig; |
| 666 |
uint32_t loopStartTime = 0;
|
| 667 |
saTimerUpdate(&loopStartTime); |
| 668 |
uint32_t currentTime = loopStartTime; |
| 669 |
setLed(BLT_TRUE); |
| 670 |
while (1) { |
| 671 |
/* read the input signals */
|
| 672 |
if (GPIO_ReadInputDataBit(SYS_REG_EN_GPIO, SYS_REG_EN_PIN) == Bit_SET &&
|
| 673 |
GPIO_ReadInputDataBit(SYS_WARMRST_N_GPIO, SYS_WARMRST_N_PIN) == Bit_SET) {
|
| 674 |
sig = CRST_SIG_SYS_WARMRST_N; |
| 675 |
break;
|
| 676 |
} |
| 677 |
if (GPIO_ReadInputDataBit(SYS_UART_UP_GPIO, SYS_UART_UP_PIN) == Bit_RESET) {
|
| 678 |
sig = CRST_SIG_SYS_UART_UP; |
| 679 |
break;
|
| 680 |
} |
| 681 |
|
| 682 |
/* check for a timeout */
|
| 683 |
saTimerUpdate(¤tTime); |
| 684 |
if (currentTime > loopStartTime + RESET_TIMEOUT_MS) {
|
| 685 |
sig = CRST_SIG_TIMEOUT; |
| 686 |
break;
|
| 687 |
} |
| 688 |
} |
| 689 |
setLed(BLT_FALSE); |
| 690 |
|
| 691 |
/* depending on the signal, react accordingly */
|
| 692 |
switch (sig) {
|
| 693 |
/* activation of the slave modules signales to boot the OS */
|
| 694 |
case CRST_SIG_SYS_WARMRST_N:
|
| 695 |
{
|
| 696 |
/* enable CAN clock */
|
| 697 |
RCC_APB1PeriphClockCmd(RCC_APB1Periph_CAN1, ENABLE); |
| 698 |
|
| 699 |
/* initialize the bootloader */
|
| 700 |
BootInit(); |
| 701 |
|
| 702 |
/* start the infinite program loop */
|
| 703 |
uint32_t loopStartTime = 0;
|
| 704 |
saTimerUpdate(&loopStartTime); |
| 705 |
uint32_t currentTime = loopStartTime; |
| 706 |
while (1) |
| 707 |
{
|
| 708 |
// /* make the LED "double-blink" */
|
| 709 |
// saTimerUpdate(¤tTime);
|
| 710 |
// if (currentTime < loopStartTime + 50) {
|
| 711 |
// setLed(BLT_TRUE);
|
| 712 |
// } else if (currentTime < loopStartTime + 50+100) {
|
| 713 |
// setLed(BLT_FALSE);
|
| 714 |
// } else if (currentTime < loopStartTime + 50+100+50) {
|
| 715 |
// setLed(BLT_TRUE);
|
| 716 |
// } else if ( currentTime < loopStartTime + 50+100+50+300) {
|
| 717 |
// setLed(BLT_FALSE);
|
| 718 |
// } else {
|
| 719 |
// loopStartTime = currentTime;
|
| 720 |
// }
|
| 721 |
|
| 722 |
/* run the bootloader task */
|
| 723 |
BootTask(); |
| 724 |
|
| 725 |
/* check the SYS_PD_N signal */
|
| 726 |
if (GPIO_ReadInputDataBit(SYS_PD_N_GPIO, SYS_PD_N_PIN) == Bit_RESET) {
|
| 727 |
blCallbackHandleShutdownRequest(); |
| 728 |
return SUCCESS;
|
| 729 |
} |
| 730 |
} |
| 731 |
|
| 732 |
break;
|
| 733 |
} |
| 734 |
/* activation of the UART_UP signal indicates that this module shall enter hibernate mode */
|
| 735 |
case CRST_SIG_SYS_UART_UP:
|
| 736 |
{
|
| 737 |
/* indicate that the MCU is busy */
|
| 738 |
GPIO_ResetBits(SYS_UART_UP_GPIO, SYS_UART_UP_PIN); |
| 739 |
|
| 740 |
/* enable the charging pins */
|
| 741 |
GPIO_SetBits(PATH_DCEN_GPIO, PATH_DCEN_PIN); |
| 742 |
|
| 743 |
/* wait some time so the systen voltage (VSYS) is stable if it is supplied via the pins */
|
| 744 |
msleep(10);
|
| 745 |
|
| 746 |
/* indicate that the MCU is not busy anymore */
|
| 747 |
GPIO_SetBits(SYS_UART_UP_GPIO, SYS_UART_UP_PIN); |
| 748 |
|
| 749 |
/* configure the accelerometer external interrupt as event */
|
| 750 |
EXTI_InitTypeDef exti; |
| 751 |
exti.EXTI_Line = EXTI_Line15; |
| 752 |
exti.EXTI_Mode = EXTI_Mode_Event; |
| 753 |
exti.EXTI_Trigger = EXTI_Trigger_Falling; |
| 754 |
exti.EXTI_LineCmd = ENABLE; |
| 755 |
EXTI_Init(&exti); |
| 756 |
|
| 757 |
/* sleep until something happens */
|
| 758 |
__WFE(); |
| 759 |
|
| 760 |
/* clear all pending EXTI events */
|
| 761 |
EXTI_DeInit(); |
| 762 |
EXTI_ClearFlag(EXTI_Line15); |
| 763 |
|
| 764 |
/* handle accelerometer wakeup
|
| 765 |
* note: In fact, the only events that will occur at this point are an interrupt event from the accelerometer, or a
|
| 766 |
* system reset from the PowerManagement via the NRST pin. Thus, if the following code is reached, it must have
|
| 767 |
* been the accelerometer.
|
| 768 |
*/
|
| 769 |
|
| 770 |
/* as as after a normal wakeup from the accelerometer */
|
| 771 |
return handleAccelWakeup();
|
| 772 |
|
| 773 |
break;
|
| 774 |
} |
| 775 |
/* if a timeout occurred, the system enters deepsleep mode */
|
| 776 |
case CRST_SIG_TIMEOUT:
|
| 777 |
{
|
| 778 |
/* reconfigure the LED_GPIO as input so it will not light up (and thus save energy) */
|
| 779 |
GPIO_InitTypeDef gpio_init; |
| 780 |
gpio_init.GPIO_Pin = LED_PIN; |
| 781 |
gpio_init.GPIO_Mode = GPIO_Mode_IN_FLOATING; |
| 782 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 783 |
GPIO_Init(LED_GPIO, &gpio_init); |
| 784 |
|
| 785 |
/* reconfigure SYS_PD_N as input so the callback will not indicate a shutdown */
|
| 786 |
gpio_init.GPIO_Pin = SYS_PD_N_PIN; |
| 787 |
gpio_init.GPIO_Mode = GPIO_Mode_IN_FLOATING; |
| 788 |
gpio_init.GPIO_Speed = GPIO_Speed_50MHz; |
| 789 |
GPIO_Init(SYS_PD_N_GPIO, &gpio_init); |
| 790 |
|
| 791 |
blCallbackShutdownDeepsleep(); |
| 792 |
break;
|
| 793 |
} |
| 794 |
default:
|
| 795 |
break;
|
| 796 |
} |
| 797 |
|
| 798 |
return ERROR;
|
| 799 |
} /*** end of handleColdReset ***/
|
| 800 |
|
| 801 |
/*
|
| 802 |
* System was woken up via the WKUP pin and the SYS_UART_UP signal was found to be responsible.
|
| 803 |
* In this case, the system starts as after a cold reset.
|
| 804 |
*/
|
| 805 |
ErrorStatus handleUartWakeup() {
|
| 806 |
return handleColdReset();
|
| 807 |
} /*** end of handleUartWakeup ***/
|
| 808 |
|
| 809 |
/*
|
| 810 |
* System was woken up via the WKUP pin and the ACCEL_INT_N signal was found to be responsible.
|
| 811 |
* The SYS_UART_UP signal is used to wake the PowerManagement before a normal cold reset is performed.
|
| 812 |
*/
|
| 813 |
ErrorStatus handleAccelWakeup() {
|
| 814 |
/* wakeup the PowerManegement (ensure that the pulse is detected) */
|
| 815 |
GPIO_ResetBits(SYS_UART_UP_GPIO, SYS_UART_UP_PIN); |
| 816 |
msleep(1);
|
| 817 |
GPIO_SetBits(SYS_UART_UP_GPIO, SYS_UART_UP_PIN); |
| 818 |
|
| 819 |
return handleColdReset();
|
| 820 |
} /*** end of handleAccelWakeu ***/
|
| 821 |
|
| 822 |
/*
|
| 823 |
* Callback function that handles the system shutdown and enters transportation mode.
|
| 824 |
* When called from a multithreaded environment, it must be ensured that no other thread will preempt this function.
|
| 825 |
* In transportation low-power mode the system can only be woken up by pulling down the NRST signal.
|
| 826 |
* Furthermore, the system can not be charged when in transportation mode.
|
| 827 |
*/
|
| 828 |
void blCallbackShutdownTransportation(void) { |
| 829 |
/* make sure that the required clocks are activated */
|
| 830 |
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); |
| 831 |
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD, ENABLE); |
| 832 |
|
| 833 |
/* set/keep the SYS_SYNC and SYS_PD signals active */
|
| 834 |
GPIO_ResetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 835 |
GPIO_ResetBits(SYS_PD_N_GPIO, SYS_PD_N_PIN); |
| 836 |
|
| 837 |
setLed(BLT_TRUE); |
| 838 |
saTimerInit(); |
| 839 |
|
| 840 |
shutdownToTransportation(BLT_TRUE); |
| 841 |
|
| 842 |
return;
|
| 843 |
} /*** end of blCallbackShutdownTransportation ***/
|
| 844 |
|
| 845 |
/*
|
| 846 |
* Callback function that handles the system shutdown and enters deepsleep mode.
|
| 847 |
* When called from a multithreaded environment, it must be ensured that no other thread will preempt this function.
|
| 848 |
* In deepsleep low-power mode the system can only be woken up via the NRST or the WKUP signal, or the RTC or IWDG, if configured.
|
| 849 |
*/
|
| 850 |
void blCallbackShutdownDeepsleep(void) { |
| 851 |
/* make sure that the required clocks are activated */
|
| 852 |
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); |
| 853 |
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD, ENABLE); |
| 854 |
|
| 855 |
/* set/keep the SYS_SYNC and SYS_PD signals active */
|
| 856 |
GPIO_ResetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 857 |
GPIO_ResetBits(SYS_PD_N_GPIO, SYS_PD_N_PIN); |
| 858 |
|
| 859 |
saTimerInit(); |
| 860 |
|
| 861 |
shutdownToDeepsleep(BLT_TRUE); |
| 862 |
|
| 863 |
return;
|
| 864 |
} /*** end of blCallbackShutdownDeepsleep ***/
|
| 865 |
|
| 866 |
/*
|
| 867 |
* Callback function that handles the system shutdown and enters hibernate mode.
|
| 868 |
* When called from a multithreaded environment, it must be ensured that no other thread will preempt this function.
|
| 869 |
*/
|
| 870 |
void blCallbackShutdownHibernate(void) { |
| 871 |
/* make sure that the required clocks are activated */
|
| 872 |
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); |
| 873 |
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD, ENABLE); |
| 874 |
|
| 875 |
/* set/keep the SYS_SYNC and SYS_PD signals active */
|
| 876 |
GPIO_ResetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 877 |
GPIO_ResetBits(SYS_PD_N_GPIO, SYS_PD_N_PIN); |
| 878 |
|
| 879 |
saTimerInit(); |
| 880 |
|
| 881 |
shutdownToHibernate(BLT_TRUE); |
| 882 |
|
| 883 |
return;
|
| 884 |
} /*** end of blCallbackShutdownHibernate ***/
|
| 885 |
|
| 886 |
/*
|
| 887 |
* Callback function that handles the system shutdown and initializes a restart.
|
| 888 |
* When called from a multithreaded environment, it must be ensured that no other thread will preempt this function.
|
| 889 |
*/
|
| 890 |
void blCallbackShutdownRestart(void) { |
| 891 |
/* make sure that the required clocks are activated */
|
| 892 |
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); |
| 893 |
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD, ENABLE); |
| 894 |
|
| 895 |
/* set/keep the SYS_SYNC and SYS_PD signal active */
|
| 896 |
GPIO_ResetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 897 |
GPIO_ResetBits(SYS_PD_N_GPIO, SYS_PD_N_PIN); |
| 898 |
|
| 899 |
/* ensure that all modules had a chance to detect the pulse on SYS_PD_N */
|
| 900 |
saTimerInit(); |
| 901 |
msleep(1);
|
| 902 |
GPIO_SetBits(SYS_PD_N_GPIO, SYS_PD_N_PIN); |
| 903 |
msleep(1);
|
| 904 |
|
| 905 |
shutdownAndRestart(BLT_TRUE); |
| 906 |
|
| 907 |
return;
|
| 908 |
} /*** end of blCallbackRestart ***/
|
| 909 |
|
| 910 |
/*
|
| 911 |
* Callback function that handles a system shutdown/restart request from another module.
|
| 912 |
* Depending on the result of the disambiguation procedure, the module will enter the according low-power mode or restart.
|
| 913 |
* When called from a multithreaded environment, it must be ensured that no other thread will preempt this function.
|
| 914 |
*/
|
| 915 |
void blCallbackHandleShutdownRequest(void) { |
| 916 |
/* make sure that the required clocks are activated */
|
| 917 |
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); |
| 918 |
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD, ENABLE); |
| 919 |
|
| 920 |
/* set/keep the SYS_SYNC and SYS_PD signal active */
|
| 921 |
GPIO_ResetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 922 |
GPIO_ResetBits(SYS_PD_N_GPIO, SYS_PD_N_PIN); |
| 923 |
|
| 924 |
/* initialized the standalone timer */
|
| 925 |
saTimerInit(); |
| 926 |
|
| 927 |
setLed(BLT_TRUE); |
| 928 |
|
| 929 |
/* deactivate SYS_PD_N and ensure that all modules had a chance to detect the falling edge */
|
| 930 |
msleep(1);
|
| 931 |
GPIO_SetBits(SYS_PD_N_GPIO, SYS_PD_N_PIN); |
| 932 |
msleep(1);
|
| 933 |
|
| 934 |
/* wait for all boards to be ready for shutdown */
|
| 935 |
GPIO_SetBits(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN); |
| 936 |
if (GPIO_ReadOutputDataBit(SYS_REG_EN_GPIO, SYS_REG_EN_PIN) == Bit_SET) {
|
| 937 |
// this must skipped if the pullup voltage (VIO3.3) is not active
|
| 938 |
setLed(BLT_TRUE); |
| 939 |
waitForSignal(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN, Bit_SET); |
| 940 |
setLed(BLT_FALSE); |
| 941 |
} |
| 942 |
|
| 943 |
/* check ths SYS_PD_N signal, whether the system shall shutdown or restart */
|
| 944 |
blt_bool shutdown_nrestart = (GPIO_ReadInputDataBit(SYS_PD_N_GPIO, SYS_PD_N_PIN) == Bit_RESET) ? BLT_TRUE : BLT_FALSE; |
| 945 |
|
| 946 |
/* disambiguation procedure (passive) */
|
| 947 |
uint32_t pulse_counter = 0;
|
| 948 |
while (waitForSignalTimeout(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN, Bit_RESET, 10)) { |
| 949 |
waitForSignal(SYS_SYNC_N_GPIO, SYS_SYNC_N_PIN, Bit_SET); |
| 950 |
++pulse_counter; |
| 951 |
} |
| 952 |
|
| 953 |
/* evaluate and hanlde disambiguation result */
|
| 954 |
if (shutdown_nrestart == BLT_TRUE) {
|
| 955 |
/* shutdown request */
|
| 956 |
|
| 957 |
/* handle special cases */
|
| 958 |
if (pulse_counter == BL_SHUTDOWN_PRI_RSN_UNKNOWN) {
|
| 959 |
/* no pulse at all was received */
|
| 960 |
pulse_counter = BL_SHUTDOWN_PRI_RSN_DEFAULT; |
| 961 |
} else if (pulse_counter != BL_SHUTDOWN_PRI_RSN_HIBERNATE && |
| 962 |
pulse_counter != BL_SHUTDOWN_PRI_RSN_DEEPSLEEP && |
| 963 |
pulse_counter != BL_SHUTDOWN_PRI_RSN_TRANSPORT) {
|
| 964 |
/* invalid number of pulses received */
|
| 965 |
blinkSOS(1);
|
| 966 |
pulse_counter = BL_SHUTDOWN_PRI_RSN_DEFAULT; |
| 967 |
} |
| 968 |
|
| 969 |
switch (pulse_counter) {
|
| 970 |
case BL_SHUTDOWN_PRI_RSN_HIBERNATE:
|
| 971 |
shutdownToHibernate(BLT_FALSE); |
| 972 |
break;
|
| 973 |
case BL_SHUTDOWN_PRI_RSN_DEEPSLEEP:
|
| 974 |
shutdownToDeepsleep(BLT_FALSE); |
| 975 |
break;
|
| 976 |
case BL_SHUTDOWN_PRI_RSN_TRANSPORT:
|
| 977 |
shutdownToTransportation(BLT_FALSE); |
| 978 |
break;
|
| 979 |
} |
| 980 |
} else {
|
| 981 |
/* restart request */
|
| 982 |
|
| 983 |
/* there is no ambiguity for restart, so it is ignored */
|
| 984 |
shutdownAndRestart(BLT_FALSE); |
| 985 |
} |
| 986 |
|
| 987 |
/* if this code is reached, the system did neither shut down, nor restart.
|
| 988 |
* This must never be the case!
|
| 989 |
*/
|
| 990 |
blinkSOSinf(); |
| 991 |
return;
|
| 992 |
} /*** end of blCallbackHandleShutdownRequest ***/
|
| 993 |
|
| 994 |
/*********************************** end of main.c *************************************/
|