Statistics
| Branch: | Tag: | Revision:

amiro-lld / docs / Doxyfile @ 188ba2a7

History | View | Annotate | Download (73.819 KB)

1 d6728c5b Thomas Schöpping
# Doxyfile 1.7.6.1
2
3
# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project.
5
#
6
# All text after a hash (#) is considered a comment and will be ignored.
7
# The format is:
8
#       TAG = value [value, ...]
9
# For lists items can also be appended using:
10
#       TAG += value [value, ...]
11
# Values that contain spaces should be placed between quotes (" ").
12
13
#---------------------------------------------------------------------------
14
# Project related configuration options
15
#---------------------------------------------------------------------------
16
17
# This tag specifies the encoding used for all characters in the config file
18
# that follow. The default is UTF-8 which is also the encoding used for all
19
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20
# iconv built into libc) for the transcoding. See
21
# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23
DOXYFILE_ENCODING      = UTF-8
24
25
# The PROJECT_NAME tag is a single word (or sequence of words) that should
26
# identify the project. Note that if you do not use Doxywizard you need
27
# to put quotes around the project name if it contains spaces.
28
29
PROJECT_NAME           = "AMiRo-LLD"
30
31
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
32
# This could be handy for archiving the generated documentation or
33
# if some version control system is used.
34
35
PROJECT_NUMBER         = 1.0
36
37
# Using the PROJECT_BRIEF tag one can provide an optional one line description
38
# for a project that appears at the top of each page and should give viewer
39
# a quick idea about the purpose of the project. Keep the description short.
40
41
PROJECT_BRIEF          = AMiRo Low Level Drivers
42
43
# With the PROJECT_LOGO tag one can specify an logo or icon that is
44
# included in the documentation. The maximum height of the logo should not
45
# exceed 55 pixels and the maximum width should not exceed 200 pixels.
46
# Doxygen will copy the logo to the output directory.
47
48
PROJECT_LOGO           =
49
50
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
51
# base path where the generated documentation will be put.
52
# If a relative path is entered, it will be relative to the location
53
# where doxygen was started. If left blank the current directory will be used.
54
55
OUTPUT_DIRECTORY       = doxygen
56
57
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
58
# 4096 sub-directories (in 2 levels) under the output directory of each output
59
# format and will distribute the generated files over these directories.
60
# Enabling this option can be useful when feeding doxygen a huge amount of
61
# source files, where putting all generated files in the same directory would
62
# otherwise cause performance problems for the file system.
63
64
CREATE_SUBDIRS         = NO
65
66
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
67
# documentation generated by doxygen is written. Doxygen will use this
68
# information to generate all constant output in the proper language.
69
# The default language is English, other supported languages are:
70
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
71
# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
72
# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
73
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
74
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
75
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
76
77
OUTPUT_LANGUAGE        = English
78
79
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
80
# include brief member descriptions after the members that are listed in
81
# the file and class documentation (similar to JavaDoc).
82
# Set to NO to disable this.
83
84
BRIEF_MEMBER_DESC      = YES
85
86
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
87
# the brief description of a member or function before the detailed description.
88
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
89
# brief descriptions will be completely suppressed.
90
91
REPEAT_BRIEF           = YES
92
93
# This tag implements a quasi-intelligent brief description abbreviator
94
# that is used to form the text in various listings. Each string
95
# in this list, if found as the leading text of the brief description, will be
96
# stripped from the text and the result after processing the whole list, is
97
# used as the annotated text. Otherwise, the brief description is used as-is.
98
# If left blank, the following values are used ("$name" is automatically
99
# replaced with the name of the entity): "The $name class" "The $name widget"
100
# "The $name file" "is" "provides" "specifies" "contains"
101
# "represents" "a" "an" "the"
102
103
ABBREVIATE_BRIEF       =
104
105
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
106
# Doxygen will generate a detailed section even if there is only a brief
107
# description.
108
109
ALWAYS_DETAILED_SEC    = NO
110
111
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
112
# inherited members of a class in the documentation of that class as if those
113
# members were ordinary class members. Constructors, destructors and assignment
114
# operators of the base classes will not be shown.
115
116
INLINE_INHERITED_MEMB  = NO
117
118
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
119
# path before files name in the file list and in the header files. If set
120
# to NO the shortest path that makes the file name unique will be used.
121
122
FULL_PATH_NAMES        = YES
123
124
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
125
# can be used to strip a user-defined part of the path. Stripping is
126
# only done if one of the specified strings matches the left-hand part of
127
# the path. The tag can be used to show relative paths in the file list.
128
# If left blank the directory from which doxygen is run is used as the
129
# path to strip.
130
131
STRIP_FROM_PATH        =
132
133
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
134
# the path mentioned in the documentation of a class, which tells
135
# the reader which header file to include in order to use a class.
136
# If left blank only the name of the header file containing the class
137
# definition is used. Otherwise one should specify the include paths that
138
# are normally passed to the compiler using the -I flag.
139
140
STRIP_FROM_INC_PATH    =
141
142
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
143
# (but less readable) file names. This can be useful if your file system
144
# doesn't support long names like on DOS, Mac, or CD-ROM.
145
146
SHORT_NAMES            = NO
147
148
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
149
# will interpret the first line (until the first dot) of a JavaDoc-style
150
# comment as the brief description. If set to NO, the JavaDoc
151
# comments will behave just like regular Qt-style comments
152
# (thus requiring an explicit @brief command for a brief description.)
153
154
JAVADOC_AUTOBRIEF      = NO
155
156
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
157
# interpret the first line (until the first dot) of a Qt-style
158
# comment as the brief description. If set to NO, the comments
159
# will behave just like regular Qt-style comments (thus requiring
160
# an explicit \brief command for a brief description.)
161
162
QT_AUTOBRIEF           = NO
163
164
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
165
# treat a multi-line C++ special comment block (i.e. a block of //! or ///
166
# comments) as a brief description. This used to be the default behaviour.
167
# The new default is to treat a multi-line C++ comment block as a detailed
168
# description. Set this tag to YES if you prefer the old behaviour instead.
169
170
MULTILINE_CPP_IS_BRIEF = NO
171
172
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
173
# member inherits the documentation from any documented member that it
174
# re-implements.
175
176
INHERIT_DOCS           = YES
177
178
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
179
# a new page for each member. If set to NO, the documentation of a member will
180
# be part of the file/class/namespace that contains it.
181
182
SEPARATE_MEMBER_PAGES  = NO
183
184
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
185
# Doxygen uses this value to replace tabs by spaces in code fragments.
186
187
TAB_SIZE               = 8
188
189
# This tag can be used to specify a number of aliases that acts
190
# as commands in the documentation. An alias has the form "name=value".
191
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
192
# put the command \sideeffect (or @sideeffect) in the documentation, which
193
# will result in a user-defined paragraph with heading "Side Effects:".
194
# You can put \n's in the value part of an alias to insert newlines.
195
196
ALIASES                =
197
198
# This tag can be used to specify a number of word-keyword mappings (TCL only).
199
# A mapping has the form "name=value". For example adding
200
# "class=itcl::class" will allow you to use the command class in the
201
# itcl::class meaning.
202
203
TCL_SUBST              =
204
205
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
206
# sources only. Doxygen will then generate output that is more tailored for C.
207
# For instance, some of the names that are used will be different. The list
208
# of all members will be omitted, etc.
209
210
OPTIMIZE_OUTPUT_FOR_C  = YES
211
212
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
213
# sources only. Doxygen will then generate output that is more tailored for
214
# Java. For instance, namespaces will be presented as packages, qualified
215
# scopes will look different, etc.
216
217
OPTIMIZE_OUTPUT_JAVA   = NO
218
219
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
220
# sources only. Doxygen will then generate output that is more tailored for
221
# Fortran.
222
223
OPTIMIZE_FOR_FORTRAN   = NO
224
225
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
226
# sources. Doxygen will then generate output that is tailored for
227
# VHDL.
228
229
OPTIMIZE_OUTPUT_VHDL   = NO
230
231
# Doxygen selects the parser to use depending on the extension of the files it
232
# parses. With this tag you can assign which parser to use for a given extension.
233
# Doxygen has a built-in mapping, but you can override or extend it using this
234
# tag. The format is ext=language, where ext is a file extension, and language
235
# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
236
# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
237
# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
238
# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
239
# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
240
241
EXTENSION_MAPPING      =
242
243
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
244
# to include (a tag file for) the STL sources as input, then you should
245
# set this tag to YES in order to let doxygen match functions declarations and
246
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
247
# func(std::string) {}). This also makes the inheritance and collaboration
248
# diagrams that involve STL classes more complete and accurate.
249
250
BUILTIN_STL_SUPPORT    = NO
251
252
# If you use Microsoft's C++/CLI language, you should set this option to YES to
253
# enable parsing support.
254
255
CPP_CLI_SUPPORT        = NO
256
257
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
258
# Doxygen will parse them like normal C++ but will assume all classes use public
259
# instead of private inheritance when no explicit protection keyword is present.
260
261
SIP_SUPPORT            = NO
262
263
# For Microsoft's IDL there are propget and propput attributes to indicate getter
264
# and setter methods for a property. Setting this option to YES (the default)
265
# will make doxygen replace the get and set methods by a property in the
266
# documentation. This will only work if the methods are indeed getting or
267
# setting a simple type. If this is not the case, or you want to show the
268
# methods anyway, you should set this option to NO.
269
270
IDL_PROPERTY_SUPPORT   = YES
271
272
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
273
# tag is set to YES, then doxygen will reuse the documentation of the first
274
# member in the group (if any) for the other members of the group. By default
275
# all members of a group must be documented explicitly.
276
277
DISTRIBUTE_GROUP_DOC   = NO
278
279
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
280
# the same type (for instance a group of public functions) to be put as a
281
# subgroup of that type (e.g. under the Public Functions section). Set it to
282
# NO to prevent subgrouping. Alternatively, this can be done per class using
283
# the \nosubgrouping command.
284
285
SUBGROUPING            = YES
286
287
# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
288
# unions are shown inside the group in which they are included (e.g. using
289
# @ingroup) instead of on a separate page (for HTML and Man pages) or
290
# section (for LaTeX and RTF).
291
292
INLINE_GROUPED_CLASSES = NO
293
294
# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
295
# unions with only public data fields will be shown inline in the documentation
296
# of the scope in which they are defined (i.e. file, namespace, or group
297
# documentation), provided this scope is documented. If set to NO (the default),
298
# structs, classes, and unions are shown on a separate page (for HTML and Man
299
# pages) or section (for LaTeX and RTF).
300
301
INLINE_SIMPLE_STRUCTS  = NO
302
303
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
304
# is documented as struct, union, or enum with the name of the typedef. So
305
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
306
# with name TypeT. When disabled the typedef will appear as a member of a file,
307
# namespace, or class. And the struct will be named TypeS. This can typically
308
# be useful for C code in case the coding convention dictates that all compound
309
# types are typedef'ed and only the typedef is referenced, never the tag name.
310
311
TYPEDEF_HIDES_STRUCT   = YES
312
313
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
314
# determine which symbols to keep in memory and which to flush to disk.
315
# When the cache is full, less often used symbols will be written to disk.
316
# For small to medium size projects (<1000 input files) the default value is
317
# probably good enough. For larger projects a too small cache size can cause
318
# doxygen to be busy swapping symbols to and from disk most of the time
319
# causing a significant performance penalty.
320
# If the system has enough physical memory increasing the cache will improve the
321
# performance by keeping more symbols in memory. Note that the value works on
322
# a logarithmic scale so increasing the size by one will roughly double the
323
# memory usage. The cache size is given by this formula:
324
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
325
# corresponding to a cache size of 2^16 = 65536 symbols.
326
327
SYMBOL_CACHE_SIZE      = 0
328
329
# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
330
# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
331
# their name and scope. Since this can be an expensive process and often the
332
# same symbol appear multiple times in the code, doxygen keeps a cache of
333
# pre-resolved symbols. If the cache is too small doxygen will become slower.
334
# If the cache is too large, memory is wasted. The cache size is given by this
335
# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
336
# corresponding to a cache size of 2^16 = 65536 symbols.
337
338
LOOKUP_CACHE_SIZE      = 0
339
340
#---------------------------------------------------------------------------
341
# Build related configuration options
342
#---------------------------------------------------------------------------
343
344
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
345
# documentation are documented, even if no documentation was available.
346
# Private class members and static file members will be hidden unless
347
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
348
349
EXTRACT_ALL            = YES
350
351
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
352
# will be included in the documentation.
353
354
EXTRACT_PRIVATE        = NO
355
356
# If the EXTRACT_STATIC tag is set to YES all static members of a file
357
# will be included in the documentation.
358
359
EXTRACT_STATIC         = NO
360
361
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
362
# defined locally in source files will be included in the documentation.
363
# If set to NO only classes defined in header files are included.
364
365
EXTRACT_LOCAL_CLASSES  = YES
366
367
# This flag is only useful for Objective-C code. When set to YES local
368
# methods, which are defined in the implementation section but not in
369
# the interface are included in the documentation.
370
# If set to NO (the default) only methods in the interface are included.
371
372
EXTRACT_LOCAL_METHODS  = NO
373
374
# If this flag is set to YES, the members of anonymous namespaces will be
375
# extracted and appear in the documentation as a namespace called
376
# 'anonymous_namespace{file}', where file will be replaced with the base
377
# name of the file that contains the anonymous namespace. By default
378
# anonymous namespaces are hidden.
379
380
EXTRACT_ANON_NSPACES   = NO
381
382
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
383
# undocumented members of documented classes, files or namespaces.
384
# If set to NO (the default) these members will be included in the
385
# various overviews, but no documentation section is generated.
386
# This option has no effect if EXTRACT_ALL is enabled.
387
388
HIDE_UNDOC_MEMBERS     = NO
389
390
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
391
# undocumented classes that are normally visible in the class hierarchy.
392
# If set to NO (the default) these classes will be included in the various
393
# overviews. This option has no effect if EXTRACT_ALL is enabled.
394
395
HIDE_UNDOC_CLASSES     = NO
396
397
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
398
# friend (class|struct|union) declarations.
399
# If set to NO (the default) these declarations will be included in the
400
# documentation.
401
402
HIDE_FRIEND_COMPOUNDS  = NO
403
404
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
405
# documentation blocks found inside the body of a function.
406
# If set to NO (the default) these blocks will be appended to the
407
# function's detailed documentation block.
408
409
HIDE_IN_BODY_DOCS      = NO
410
411
# The INTERNAL_DOCS tag determines if documentation
412
# that is typed after a \internal command is included. If the tag is set
413
# to NO (the default) then the documentation will be excluded.
414
# Set it to YES to include the internal documentation.
415
416
INTERNAL_DOCS          = NO
417
418
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
419
# file names in lower-case letters. If set to YES upper-case letters are also
420
# allowed. This is useful if you have classes or files whose names only differ
421
# in case and if your file system supports case sensitive file names. Windows
422
# and Mac users are advised to set this option to NO.
423
424
CASE_SENSE_NAMES       = YES
425
426
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
427
# will show members with their full class and namespace scopes in the
428
# documentation. If set to YES the scope will be hidden.
429
430
HIDE_SCOPE_NAMES       = NO
431
432
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
433
# will put a list of the files that are included by a file in the documentation
434
# of that file.
435
436
SHOW_INCLUDE_FILES     = YES
437
438
# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
439
# will list include files with double quotes in the documentation
440
# rather than with sharp brackets.
441
442
FORCE_LOCAL_INCLUDES   = NO
443
444
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
445
# is inserted in the documentation for inline members.
446
447
INLINE_INFO            = YES
448
449
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
450
# will sort the (detailed) documentation of file and class members
451
# alphabetically by member name. If set to NO the members will appear in
452
# declaration order.
453
454
SORT_MEMBER_DOCS       = YES
455
456
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
457
# brief documentation of file, namespace and class members alphabetically
458
# by member name. If set to NO (the default) the members will appear in
459
# declaration order.
460
461
SORT_BRIEF_DOCS        = NO
462
463
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
464
# will sort the (brief and detailed) documentation of class members so that
465
# constructors and destructors are listed first. If set to NO (the default)
466
# the constructors will appear in the respective orders defined by
467
# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
468
# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
469
# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
470
471
SORT_MEMBERS_CTORS_1ST = NO
472
473
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
474
# hierarchy of group names into alphabetical order. If set to NO (the default)
475
# the group names will appear in their defined order.
476
477
SORT_GROUP_NAMES       = NO
478
479
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
480
# sorted by fully-qualified names, including namespaces. If set to
481
# NO (the default), the class list will be sorted only by class name,
482
# not including the namespace part.
483
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
484
# Note: This option applies only to the class list, not to the
485
# alphabetical list.
486
487
SORT_BY_SCOPE_NAME     = NO
488
489
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
490
# do proper type resolution of all parameters of a function it will reject a
491
# match between the prototype and the implementation of a member function even
492
# if there is only one candidate or it is obvious which candidate to choose
493
# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
494
# will still accept a match between prototype and implementation in such cases.
495
496
STRICT_PROTO_MATCHING  = NO
497
498
# The GENERATE_TODOLIST tag can be used to enable (YES) or
499
# disable (NO) the todo list. This list is created by putting \todo
500
# commands in the documentation.
501
502
GENERATE_TODOLIST      = YES
503
504
# The GENERATE_TESTLIST tag can be used to enable (YES) or
505
# disable (NO) the test list. This list is created by putting \test
506
# commands in the documentation.
507
508
GENERATE_TESTLIST      = YES
509
510
# The GENERATE_BUGLIST tag can be used to enable (YES) or
511
# disable (NO) the bug list. This list is created by putting \bug
512
# commands in the documentation.
513
514
GENERATE_BUGLIST       = YES
515
516
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
517
# disable (NO) the deprecated list. This list is created by putting
518
# \deprecated commands in the documentation.
519
520
GENERATE_DEPRECATEDLIST= YES
521
522
# The ENABLED_SECTIONS tag can be used to enable conditional
523
# documentation sections, marked by \if sectionname ... \endif.
524
525
ENABLED_SECTIONS       =
526
527
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
528
# the initial value of a variable or macro consists of for it to appear in
529
# the documentation. If the initializer consists of more lines than specified
530
# here it will be hidden. Use a value of 0 to hide initializers completely.
531
# The appearance of the initializer of individual variables and macros in the
532
# documentation can be controlled using \showinitializer or \hideinitializer
533
# command in the documentation regardless of this setting.
534
535
MAX_INITIALIZER_LINES  = 30
536
537
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
538
# at the bottom of the documentation of classes and structs. If set to YES the
539
# list will mention the files that were used to generate the documentation.
540
541
SHOW_USED_FILES        = YES
542
543
# If the sources in your project are distributed over multiple directories
544
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
545
# in the documentation. The default is NO.
546
547
SHOW_DIRECTORIES       = NO
548
549
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
550
# This will remove the Files entry from the Quick Index and from the
551
# Folder Tree View (if specified). The default is YES.
552
553
SHOW_FILES             = YES
554
555
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
556
# Namespaces page.
557
# This will remove the Namespaces entry from the Quick Index
558
# and from the Folder Tree View (if specified). The default is YES.
559
560
SHOW_NAMESPACES        = YES
561
562
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
563
# doxygen should invoke to get the current version for each file (typically from
564
# the version control system). Doxygen will invoke the program by executing (via
565
# popen()) the command <command> <input-file>, where <command> is the value of
566
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
567
# provided by doxygen. Whatever the program writes to standard output
568
# is used as the file version. See the manual for examples.
569
570
FILE_VERSION_FILTER    =
571
572
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
573
# by doxygen. The layout file controls the global structure of the generated
574
# output files in an output format independent way. The create the layout file
575
# that represents doxygen's defaults, run doxygen with the -l option.
576
# You can optionally specify a file name after the option, if omitted
577
# DoxygenLayout.xml will be used as the name of the layout file.
578
579
LAYOUT_FILE            =
580
581
# The CITE_BIB_FILES tag can be used to specify one or more bib files
582
# containing the references data. This must be a list of .bib files. The
583
# .bib extension is automatically appended if omitted. Using this command
584
# requires the bibtex tool to be installed. See also
585
# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
586
# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
587
# feature you need bibtex and perl available in the search path.
588
589
CITE_BIB_FILES         =
590
591
#---------------------------------------------------------------------------
592
# configuration options related to warning and progress messages
593
#---------------------------------------------------------------------------
594
595
# The QUIET tag can be used to turn on/off the messages that are generated
596
# by doxygen. Possible values are YES and NO. If left blank NO is used.
597
598
QUIET                  = NO
599
600
# The WARNINGS tag can be used to turn on/off the warning messages that are
601
# generated by doxygen. Possible values are YES and NO. If left blank
602
# NO is used.
603
604
WARNINGS               = YES
605
606
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
607
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
608
# automatically be disabled.
609
610
WARN_IF_UNDOCUMENTED   = YES
611
612
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
613
# potential errors in the documentation, such as not documenting some
614
# parameters in a documented function, or documenting parameters that
615
# don't exist or using markup commands wrongly.
616
617
WARN_IF_DOC_ERROR      = YES
618
619
# The WARN_NO_PARAMDOC option can be enabled to get warnings for
620
# functions that are documented, but have no documentation for their parameters
621
# or return value. If set to NO (the default) doxygen will only warn about
622
# wrong or incomplete parameter documentation, but not about the absence of
623
# documentation.
624
625
WARN_NO_PARAMDOC       = NO
626
627
# The WARN_FORMAT tag determines the format of the warning messages that
628
# doxygen can produce. The string should contain the $file, $line, and $text
629
# tags, which will be replaced by the file and line number from which the
630
# warning originated and the warning text. Optionally the format may contain
631
# $version, which will be replaced by the version of the file (if it could
632
# be obtained via FILE_VERSION_FILTER)
633
634
WARN_FORMAT            = "$file:$line: $text"
635
636
# The WARN_LOGFILE tag can be used to specify a file to which warning
637
# and error messages should be written. If left blank the output is written
638
# to stderr.
639
640
WARN_LOGFILE           =
641
642
#---------------------------------------------------------------------------
643
# configuration options related to the input files
644
#---------------------------------------------------------------------------
645
646
# The INPUT tag can be used to specify the files and/or directories that contain
647
# documented source files. You may enter file names like "myfile.cpp" or
648
# directories like "/usr/src/myproject". Separate the files or directories
649
# with spaces.
650
651
INPUT                  = ".."
652
653
# This tag can be used to specify the character encoding of the source files
654
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
655
# also the default input encoding. Doxygen uses libiconv (or the iconv built
656
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
657
# the list of possible encodings.
658
659
INPUT_ENCODING         = UTF-8
660
661
# If the value of the INPUT tag contains directories, you can use the
662
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
663
# and *.h) to filter out the source-files in the directories. If left
664
# blank the following patterns are tested:
665
# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
666
# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
667
# *.f90 *.f *.for *.vhd *.vhdl
668
669
FILE_PATTERNS          = *.c *.h
670
671
# The RECURSIVE tag can be used to turn specify whether or not subdirectories
672
# should be searched for input files as well. Possible values are YES and NO.
673
# If left blank NO is used.
674
675
RECURSIVE              = YES
676
677
# The EXCLUDE tag can be used to specify files and/or directories that should be
678
# excluded from the INPUT source files. This way you can easily exclude a
679
# subdirectory from a directory tree whose root is specified with the INPUT tag.
680
# Note that relative paths are relative to the directory from which doxygen is
681
# run.
682
683
EXCLUDE                = "template", "docs"
684
685
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
686
# directories that are symbolic links (a Unix file system feature) are excluded
687
# from the input.
688
689
EXCLUDE_SYMLINKS       = NO
690
691
# If the value of the INPUT tag contains directories, you can use the
692
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
693
# certain files from those directories. Note that the wildcards are matched
694
# against the file with absolute path, so to exclude all test directories
695
# for example use the pattern */test/*
696
697
EXCLUDE_PATTERNS       =
698
699
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
700
# (namespaces, classes, functions, etc.) that should be excluded from the
701
# output. The symbol name can be a fully qualified name, a word, or if the
702
# wildcard * is used, a substring. Examples: ANamespace, AClass,
703
# AClass::ANamespace, ANamespace::*Test
704
705
EXCLUDE_SYMBOLS        =
706
707
# The EXAMPLE_PATH tag can be used to specify one or more files or
708
# directories that contain example code fragments that are included (see
709
# the \include command).
710
711
EXAMPLE_PATH           =
712
713
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
714
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
715
# and *.h) to filter out the source-files in the directories. If left
716
# blank all files are included.
717
718
EXAMPLE_PATTERNS       =
719
720
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
721
# searched for input files to be used with the \include or \dontinclude
722
# commands irrespective of the value of the RECURSIVE tag.
723
# Possible values are YES and NO. If left blank NO is used.
724
725
EXAMPLE_RECURSIVE      = NO
726
727
# The IMAGE_PATH tag can be used to specify one or more files or
728
# directories that contain image that are included in the documentation (see
729
# the \image command).
730
731
IMAGE_PATH             =
732
733
# The INPUT_FILTER tag can be used to specify a program that doxygen should
734
# invoke to filter for each input file. Doxygen will invoke the filter program
735
# by executing (via popen()) the command <filter> <input-file>, where <filter>
736
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
737
# input file. Doxygen will then use the output that the filter program writes
738
# to standard output.
739
# If FILTER_PATTERNS is specified, this tag will be
740
# ignored.
741
742
INPUT_FILTER           =
743
744
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
745
# basis.
746
# Doxygen will compare the file name with each pattern and apply the
747
# filter if there is a match.
748
# The filters are a list of the form:
749
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
750
# info on how filters are used. If FILTER_PATTERNS is empty or if
751
# non of the patterns match the file name, INPUT_FILTER is applied.
752
753
FILTER_PATTERNS        =
754
755
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
756
# INPUT_FILTER) will be used to filter the input files when producing source
757
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
758
759
FILTER_SOURCE_FILES    = NO
760
761
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
762
# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
763
# and it is also possible to disable source filtering for a specific pattern
764
# using *.ext= (so without naming a filter). This option only has effect when
765
# FILTER_SOURCE_FILES is enabled.
766
767
FILTER_SOURCE_PATTERNS =
768
769
#---------------------------------------------------------------------------
770
# configuration options related to source browsing
771
#---------------------------------------------------------------------------
772
773
# If the SOURCE_BROWSER tag is set to YES then a list of source files will
774
# be generated. Documented entities will be cross-referenced with these sources.
775
# Note: To get rid of all source code in the generated output, make sure also
776
# VERBATIM_HEADERS is set to NO.
777
778
SOURCE_BROWSER         = NO
779
780
# Setting the INLINE_SOURCES tag to YES will include the body
781
# of functions and classes directly in the documentation.
782
783
INLINE_SOURCES         = NO
784
785
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
786
# doxygen to hide any special comment blocks from generated source code
787
# fragments. Normal C and C++ comments will always remain visible.
788
789
STRIP_CODE_COMMENTS    = YES
790
791
# If the REFERENCED_BY_RELATION tag is set to YES
792
# then for each documented function all documented
793
# functions referencing it will be listed.
794
795
REFERENCED_BY_RELATION = NO
796
797
# If the REFERENCES_RELATION tag is set to YES
798
# then for each documented function all documented entities
799
# called/used by that function will be listed.
800
801
REFERENCES_RELATION    = NO
802
803
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
804
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
805
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
806
# link to the source code.
807
# Otherwise they will link to the documentation.
808
809
REFERENCES_LINK_SOURCE = YES
810
811
# If the USE_HTAGS tag is set to YES then the references to source code
812
# will point to the HTML generated by the htags(1) tool instead of doxygen
813
# built-in source browser. The htags tool is part of GNU's global source
814
# tagging system (see http://www.gnu.org/software/global/global.html). You
815
# will need version 4.8.6 or higher.
816
817
USE_HTAGS              = NO
818
819
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
820
# will generate a verbatim copy of the header file for each class for
821
# which an include is specified. Set to NO to disable this.
822
823
VERBATIM_HEADERS       = YES
824
825
#---------------------------------------------------------------------------
826
# configuration options related to the alphabetical class index
827
#---------------------------------------------------------------------------
828
829
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
830
# of all compounds will be generated. Enable this if the project
831
# contains a lot of classes, structs, unions or interfaces.
832
833
ALPHABETICAL_INDEX     = YES
834
835
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
836
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
837
# in which this list will be split (can be a number in the range [1..20])
838
839
COLS_IN_ALPHA_INDEX    = 5
840
841
# In case all classes in a project start with a common prefix, all
842
# classes will be put under the same header in the alphabetical index.
843
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
844
# should be ignored while generating the index headers.
845
846
IGNORE_PREFIX          =
847
848
#---------------------------------------------------------------------------
849
# configuration options related to the HTML output
850
#---------------------------------------------------------------------------
851
852
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
853
# generate HTML output.
854
855
GENERATE_HTML          = YES
856
857
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
858
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
859
# put in front of it. If left blank `html' will be used as the default path.
860
861
HTML_OUTPUT            = html
862
863
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
864
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
865
# doxygen will generate files with .html extension.
866
867
HTML_FILE_EXTENSION    = .html
868
869
# The HTML_HEADER tag can be used to specify a personal HTML header for
870
# each generated HTML page. If it is left blank doxygen will generate a
871
# standard header. Note that when using a custom header you are responsible
872
#  for the proper inclusion of any scripts and style sheets that doxygen
873
# needs, which is dependent on the configuration options used.
874
# It is advised to generate a default header using "doxygen -w html
875
# header.html footer.html stylesheet.css YourConfigFile" and then modify
876
# that header. Note that the header is subject to change so you typically
877
# have to redo this when upgrading to a newer version of doxygen or when
878
# changing the value of configuration settings such as GENERATE_TREEVIEW!
879
880
HTML_HEADER            =
881
882
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
883
# each generated HTML page. If it is left blank doxygen will generate a
884
# standard footer.
885
886
HTML_FOOTER            =
887
888
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
889
# style sheet that is used by each HTML page. It can be used to
890
# fine-tune the look of the HTML output. If the tag is left blank doxygen
891
# will generate a default style sheet. Note that doxygen will try to copy
892
# the style sheet file to the HTML output directory, so don't put your own
893
# style sheet in the HTML output directory as well, or it will be erased!
894
895
HTML_STYLESHEET        =
896
897
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
898
# other source files which should be copied to the HTML output directory. Note
899
# that these files will be copied to the base HTML output directory. Use the
900
# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
901
# files. In the HTML_STYLESHEET file, use the file name only. Also note that
902
# the files will be copied as-is; there are no commands or markers available.
903
904
HTML_EXTRA_FILES       =
905
906
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
907
# Doxygen will adjust the colors in the style sheet and background images
908
# according to this color. Hue is specified as an angle on a colorwheel,
909
# see http://en.wikipedia.org/wiki/Hue for more information.
910
# For instance the value 0 represents red, 60 is yellow, 120 is green,
911
# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
912
# The allowed range is 0 to 359.
913
914
HTML_COLORSTYLE_HUE    = 220
915
916
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
917
# the colors in the HTML output. For a value of 0 the output will use
918
# grayscales only. A value of 255 will produce the most vivid colors.
919
920
HTML_COLORSTYLE_SAT    = 100
921
922
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
923
# the luminance component of the colors in the HTML output. Values below
924
# 100 gradually make the output lighter, whereas values above 100 make
925
# the output darker. The value divided by 100 is the actual gamma applied,
926
# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
927
# and 100 does not change the gamma.
928
929
HTML_COLORSTYLE_GAMMA  = 80
930
931
# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
932
# page will contain the date and time when the page was generated. Setting
933
# this to NO can help when comparing the output of multiple runs.
934
935
HTML_TIMESTAMP         = YES
936
937
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
938
# files or namespaces will be aligned in HTML using tables. If set to
939
# NO a bullet list will be used.
940
941
HTML_ALIGN_MEMBERS     = YES
942
943
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
944
# documentation will contain sections that can be hidden and shown after the
945
# page has loaded. For this to work a browser that supports
946
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
947
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
948
949
HTML_DYNAMIC_SECTIONS  = NO
950
951
# If the GENERATE_DOCSET tag is set to YES, additional index files
952
# will be generated that can be used as input for Apple's Xcode 3
953
# integrated development environment, introduced with OSX 10.5 (Leopard).
954
# To create a documentation set, doxygen will generate a Makefile in the
955
# HTML output directory. Running make will produce the docset in that
956
# directory and running "make install" will install the docset in
957
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
958
# it at startup.
959
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
960
# for more information.
961
962
GENERATE_DOCSET        = NO
963
964
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
965
# feed. A documentation feed provides an umbrella under which multiple
966
# documentation sets from a single provider (such as a company or product suite)
967
# can be grouped.
968
969
DOCSET_FEEDNAME        = "Doxygen generated docs"
970
971
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
972
# should uniquely identify the documentation set bundle. This should be a
973
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
974
# will append .docset to the name.
975
976
DOCSET_BUNDLE_ID       = org.doxygen.Project
977
978
# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
979
# the documentation publisher. This should be a reverse domain-name style
980
# string, e.g. com.mycompany.MyDocSet.documentation.
981
982
DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
983
984
# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
985
986
DOCSET_PUBLISHER_NAME  = Publisher
987
988
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
989
# will be generated that can be used as input for tools like the
990
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
991
# of the generated HTML documentation.
992
993
GENERATE_HTMLHELP      = NO
994
995
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
996
# be used to specify the file name of the resulting .chm file. You
997
# can add a path in front of the file if the result should not be
998
# written to the html output directory.
999
1000
CHM_FILE               =
1001
1002
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
1003
# be used to specify the location (absolute path including file name) of
1004
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
1005
# the HTML help compiler on the generated index.hhp.
1006
1007
HHC_LOCATION           =
1008
1009
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
1010
# controls if a separate .chi index file is generated (YES) or that
1011
# it should be included in the master .chm file (NO).
1012
1013
GENERATE_CHI           = NO
1014
1015
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
1016
# is used to encode HtmlHelp index (hhk), content (hhc) and project file
1017
# content.
1018
1019
CHM_INDEX_ENCODING     =
1020
1021
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
1022
# controls whether a binary table of contents is generated (YES) or a
1023
# normal table of contents (NO) in the .chm file.
1024
1025
BINARY_TOC             = NO
1026
1027
# The TOC_EXPAND flag can be set to YES to add extra items for group members
1028
# to the contents of the HTML help documentation and to the tree view.
1029
1030
TOC_EXPAND             = NO
1031
1032
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1033
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
1034
# that can be used as input for Qt's qhelpgenerator to generate a
1035
# Qt Compressed Help (.qch) of the generated HTML documentation.
1036
1037
GENERATE_QHP           = NO
1038
1039
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
1040
# be used to specify the file name of the resulting .qch file.
1041
# The path specified is relative to the HTML output folder.
1042
1043
QCH_FILE               =
1044
1045
# The QHP_NAMESPACE tag specifies the namespace to use when generating
1046
# Qt Help Project output. For more information please see
1047
# http://doc.trolltech.com/qthelpproject.html#namespace
1048
1049
QHP_NAMESPACE          = org.doxygen.Project
1050
1051
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
1052
# Qt Help Project output. For more information please see
1053
# http://doc.trolltech.com/qthelpproject.html#virtual-folders
1054
1055
QHP_VIRTUAL_FOLDER     = doc
1056
1057
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
1058
# add. For more information please see
1059
# http://doc.trolltech.com/qthelpproject.html#custom-filters
1060
1061
QHP_CUST_FILTER_NAME   =
1062
1063
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
1064
# custom filter to add. For more information please see
1065
# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
1066
# Qt Help Project / Custom Filters</a>.
1067
1068
QHP_CUST_FILTER_ATTRS  =
1069
1070
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1071
# project's
1072
# filter section matches.
1073
# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
1074
# Qt Help Project / Filter Attributes</a>.
1075
1076
QHP_SECT_FILTER_ATTRS  =
1077
1078
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1079
# be used to specify the location of Qt's qhelpgenerator.
1080
# If non-empty doxygen will try to run qhelpgenerator on the generated
1081
# .qhp file.
1082
1083
QHG_LOCATION           =
1084
1085
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1086
#  will be generated, which together with the HTML files, form an Eclipse help
1087
# plugin. To install this plugin and make it available under the help contents
1088
# menu in Eclipse, the contents of the directory containing the HTML and XML
1089
# files needs to be copied into the plugins directory of eclipse. The name of
1090
# the directory within the plugins directory should be the same as
1091
# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1092
# the help appears.
1093
1094
GENERATE_ECLIPSEHELP   = NO
1095
1096
# A unique identifier for the eclipse help plugin. When installing the plugin
1097
# the directory name containing the HTML and XML files should also have
1098
# this name.
1099
1100
ECLIPSE_DOC_ID         = org.doxygen.Project
1101
1102
# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
1103
# at top of each HTML page. The value NO (the default) enables the index and
1104
# the value YES disables it. Since the tabs have the same information as the
1105
# navigation tree you can set this option to NO if you already set
1106
# GENERATE_TREEVIEW to YES.
1107
1108
DISABLE_INDEX          = NO
1109
1110
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1111
# structure should be generated to display hierarchical information.
1112
# If the tag value is set to YES, a side panel will be generated
1113
# containing a tree-like index structure (just like the one that
1114
# is generated for HTML Help). For this to work a browser that supports
1115
# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1116
# Windows users are probably better off using the HTML help feature.
1117
# Since the tree basically has the same information as the tab index you
1118
# could consider to set DISABLE_INDEX to NO when enabling this option.
1119
1120
GENERATE_TREEVIEW      = NO
1121
1122
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
1123
# (range [0,1..20]) that doxygen will group on one line in the generated HTML
1124
# documentation. Note that a value of 0 will completely suppress the enum
1125
# values from appearing in the overview section.
1126
1127
ENUM_VALUES_PER_LINE   = 4
1128
1129
# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
1130
# and Class Hierarchy pages using a tree view instead of an ordered list.
1131
1132
USE_INLINE_TREES       = NO
1133
1134
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1135
# used to set the initial width (in pixels) of the frame in which the tree
1136
# is shown.
1137
1138
TREEVIEW_WIDTH         = 250
1139
1140
# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
1141
# links to external symbols imported via tag files in a separate window.
1142
1143
EXT_LINKS_IN_WINDOW    = NO
1144
1145
# Use this tag to change the font size of Latex formulas included
1146
# as images in the HTML documentation. The default is 10. Note that
1147
# when you change the font size after a successful doxygen run you need
1148
# to manually remove any form_*.png images from the HTML output directory
1149
# to force them to be regenerated.
1150
1151
FORMULA_FONTSIZE       = 10
1152
1153
# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1154
# generated for formulas are transparent PNGs. Transparent PNGs are
1155
# not supported properly for IE 6.0, but are supported on all modern browsers.
1156
# Note that when changing this option you need to delete any form_*.png files
1157
# in the HTML output before the changes have effect.
1158
1159
FORMULA_TRANSPARENT    = YES
1160
1161
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1162
# (see http://www.mathjax.org) which uses client side Javascript for the
1163
# rendering instead of using prerendered bitmaps. Use this if you do not
1164
# have LaTeX installed or if you want to formulas look prettier in the HTML
1165
# output. When enabled you also need to install MathJax separately and
1166
# configure the path to it using the MATHJAX_RELPATH option.
1167
1168
USE_MATHJAX            = NO
1169
1170
# When MathJax is enabled you need to specify the location relative to the
1171
# HTML output directory using the MATHJAX_RELPATH option. The destination
1172
# directory should contain the MathJax.js script. For instance, if the mathjax
1173
# directory is located at the same level as the HTML output directory, then
1174
# MATHJAX_RELPATH should be ../mathjax. The default value points to the
1175
# mathjax.org site, so you can quickly see the result without installing
1176
# MathJax, but it is strongly recommended to install a local copy of MathJax
1177
# before deployment.
1178
1179
MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
1180
1181
# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
1182
# names that should be enabled during MathJax rendering.
1183
1184
MATHJAX_EXTENSIONS     =
1185
1186
# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1187
# for the HTML output. The underlying search engine uses javascript
1188
# and DHTML and should work on any modern browser. Note that when using
1189
# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1190
# (GENERATE_DOCSET) there is already a search function so this one should
1191
# typically be disabled. For large projects the javascript based search engine
1192
# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1193
1194
SEARCHENGINE           = YES
1195
1196
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1197
# implemented using a PHP enabled web server instead of at the web client
1198
# using Javascript. Doxygen will generate the search PHP script and index
1199
# file to put on the web server. The advantage of the server
1200
# based approach is that it scales better to large projects and allows
1201
# full text search. The disadvantages are that it is more difficult to setup
1202
# and does not have live searching capabilities.
1203
1204
SERVER_BASED_SEARCH    = NO
1205
1206
#---------------------------------------------------------------------------
1207
# configuration options related to the LaTeX output
1208
#---------------------------------------------------------------------------
1209
1210
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1211
# generate Latex output.
1212
1213
GENERATE_LATEX         = YES
1214
1215
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1216
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1217
# put in front of it. If left blank `latex' will be used as the default path.
1218
1219
LATEX_OUTPUT           = latex
1220
1221
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1222
# invoked. If left blank `latex' will be used as the default command name.
1223
# Note that when enabling USE_PDFLATEX this option is only used for
1224
# generating bitmaps for formulas in the HTML output, but not in the
1225
# Makefile that is written to the output directory.
1226
1227
LATEX_CMD_NAME         = latex
1228
1229
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1230
# generate index for LaTeX. If left blank `makeindex' will be used as the
1231
# default command name.
1232
1233
MAKEINDEX_CMD_NAME     = makeindex
1234
1235
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1236
# LaTeX documents. This may be useful for small projects and may help to
1237
# save some trees in general.
1238
1239
COMPACT_LATEX          = NO
1240
1241
# The PAPER_TYPE tag can be used to set the paper type that is used
1242
# by the printer. Possible values are: a4, letter, legal and
1243
# executive. If left blank a4wide will be used.
1244
1245
PAPER_TYPE             = a4
1246
1247
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1248
# packages that should be included in the LaTeX output.
1249
1250
EXTRA_PACKAGES         =
1251
1252
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1253
# the generated latex document. The header should contain everything until
1254
# the first chapter. If it is left blank doxygen will generate a
1255
# standard header. Notice: only use this tag if you know what you are doing!
1256
1257
LATEX_HEADER           =
1258
1259
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
1260
# the generated latex document. The footer should contain everything after
1261
# the last chapter. If it is left blank doxygen will generate a
1262
# standard footer. Notice: only use this tag if you know what you are doing!
1263
1264
LATEX_FOOTER           =
1265
1266
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1267
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1268
# contain links (just like the HTML output) instead of page references
1269
# This makes the output suitable for online browsing using a pdf viewer.
1270
1271
PDF_HYPERLINKS         = YES
1272
1273
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1274
# plain latex in the generated Makefile. Set this option to YES to get a
1275
# higher quality PDF documentation.
1276
1277
USE_PDFLATEX           = YES
1278
1279
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1280
# command to the generated LaTeX files. This will instruct LaTeX to keep
1281
# running if errors occur, instead of asking the user for help.
1282
# This option is also used when generating formulas in HTML.
1283
1284
LATEX_BATCHMODE        = NO
1285
1286
# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1287
# include the index chapters (such as File Index, Compound Index, etc.)
1288
# in the output.
1289
1290
LATEX_HIDE_INDICES     = NO
1291
1292
# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1293
# source code with syntax highlighting in the LaTeX output.
1294
# Note that which sources are shown also depends on other settings
1295
# such as SOURCE_BROWSER.
1296
1297
LATEX_SOURCE_CODE      = NO
1298
1299
# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1300
# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
1301
# http://en.wikipedia.org/wiki/BibTeX for more info.
1302
1303
LATEX_BIB_STYLE        = plain
1304
1305
#---------------------------------------------------------------------------
1306
# configuration options related to the RTF output
1307
#---------------------------------------------------------------------------
1308
1309
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1310
# The RTF output is optimized for Word 97 and may not look very pretty with
1311
# other RTF readers or editors.
1312
1313
GENERATE_RTF           = NO
1314
1315
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1316
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1317
# put in front of it. If left blank `rtf' will be used as the default path.
1318
1319
RTF_OUTPUT             = rtf
1320
1321
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1322
# RTF documents. This may be useful for small projects and may help to
1323
# save some trees in general.
1324
1325
COMPACT_RTF            = NO
1326
1327
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1328
# will contain hyperlink fields. The RTF file will
1329
# contain links (just like the HTML output) instead of page references.
1330
# This makes the output suitable for online browsing using WORD or other
1331
# programs which support those fields.
1332
# Note: wordpad (write) and others do not support links.
1333
1334
RTF_HYPERLINKS         = NO
1335
1336
# Load style sheet definitions from file. Syntax is similar to doxygen's
1337
# config file, i.e. a series of assignments. You only have to provide
1338
# replacements, missing definitions are set to their default value.
1339
1340
RTF_STYLESHEET_FILE    =
1341
1342
# Set optional variables used in the generation of an rtf document.
1343
# Syntax is similar to doxygen's config file.
1344
1345
RTF_EXTENSIONS_FILE    =
1346
1347
#---------------------------------------------------------------------------
1348
# configuration options related to the man page output
1349
#---------------------------------------------------------------------------
1350
1351
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1352
# generate man pages
1353
1354
GENERATE_MAN           = NO
1355
1356
# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1357
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1358
# put in front of it. If left blank `man' will be used as the default path.
1359
1360
MAN_OUTPUT             = man
1361
1362
# The MAN_EXTENSION tag determines the extension that is added to
1363
# the generated man pages (default is the subroutine's section .3)
1364
1365
MAN_EXTENSION          = .3
1366
1367
# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1368
# then it will generate one additional man file for each entity
1369
# documented in the real man page(s). These additional files
1370
# only source the real man page, but without them the man command
1371
# would be unable to find the correct page. The default is NO.
1372
1373
MAN_LINKS              = NO
1374
1375
#---------------------------------------------------------------------------
1376
# configuration options related to the XML output
1377
#---------------------------------------------------------------------------
1378
1379
# If the GENERATE_XML tag is set to YES Doxygen will
1380
# generate an XML file that captures the structure of
1381
# the code including all documentation.
1382
1383
GENERATE_XML           = NO
1384
1385
# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1386
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1387
# put in front of it. If left blank `xml' will be used as the default path.
1388
1389
XML_OUTPUT             = xml
1390
1391
# The XML_SCHEMA tag can be used to specify an XML schema,
1392
# which can be used by a validating XML parser to check the
1393
# syntax of the XML files.
1394
1395
XML_SCHEMA             =
1396
1397
# The XML_DTD tag can be used to specify an XML DTD,
1398
# which can be used by a validating XML parser to check the
1399
# syntax of the XML files.
1400
1401
XML_DTD                =
1402
1403
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1404
# dump the program listings (including syntax highlighting
1405
# and cross-referencing information) to the XML output. Note that
1406
# enabling this will significantly increase the size of the XML output.
1407
1408
XML_PROGRAMLISTING     = YES
1409
1410
#---------------------------------------------------------------------------
1411
# configuration options for the AutoGen Definitions output
1412
#---------------------------------------------------------------------------
1413
1414
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1415
# generate an AutoGen Definitions (see autogen.sf.net) file
1416
# that captures the structure of the code including all
1417
# documentation. Note that this feature is still experimental
1418
# and incomplete at the moment.
1419
1420
GENERATE_AUTOGEN_DEF   = NO
1421
1422
#---------------------------------------------------------------------------
1423
# configuration options related to the Perl module output
1424
#---------------------------------------------------------------------------
1425
1426
# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1427
# generate a Perl module file that captures the structure of
1428
# the code including all documentation. Note that this
1429
# feature is still experimental and incomplete at the
1430
# moment.
1431
1432
GENERATE_PERLMOD       = NO
1433
1434
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1435
# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1436
# to generate PDF and DVI output from the Perl module output.
1437
1438
PERLMOD_LATEX          = NO
1439
1440
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1441
# nicely formatted so it can be parsed by a human reader.
1442
# This is useful
1443
# if you want to understand what is going on.
1444
# On the other hand, if this
1445
# tag is set to NO the size of the Perl module output will be much smaller
1446
# and Perl will parse it just the same.
1447
1448
PERLMOD_PRETTY         = YES
1449
1450
# The names of the make variables in the generated doxyrules.make file
1451
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1452
# This is useful so different doxyrules.make files included by the same
1453
# Makefile don't overwrite each other's variables.
1454
1455
PERLMOD_MAKEVAR_PREFIX =
1456
1457
#---------------------------------------------------------------------------
1458
# Configuration options related to the preprocessor
1459
#---------------------------------------------------------------------------
1460
1461
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1462
# evaluate all C-preprocessor directives found in the sources and include
1463
# files.
1464
1465
ENABLE_PREPROCESSING   = YES
1466
1467
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1468
# names in the source code. If set to NO (the default) only conditional
1469
# compilation will be performed. Macro expansion can be done in a controlled
1470
# way by setting EXPAND_ONLY_PREDEF to YES.
1471
1472
MACRO_EXPANSION        = NO
1473
1474
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1475
# then the macro expansion is limited to the macros specified with the
1476
# PREDEFINED and EXPAND_AS_DEFINED tags.
1477
1478
EXPAND_ONLY_PREDEF     = NO
1479
1480
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1481
# pointed to by INCLUDE_PATH will be searched when a #include is found.
1482
1483
SEARCH_INCLUDES        = YES
1484
1485
# The INCLUDE_PATH tag can be used to specify one or more directories that
1486
# contain include files that are not input files but should be processed by
1487
# the preprocessor.
1488
1489
INCLUDE_PATH           =
1490
1491
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1492
# patterns (like *.h and *.hpp) to filter out the header-files in the
1493
# directories. If left blank, the patterns specified with FILE_PATTERNS will
1494
# be used.
1495
1496
INCLUDE_FILE_PATTERNS  =
1497
1498
# The PREDEFINED tag can be used to specify one or more macro names that
1499
# are defined before the preprocessor is started (similar to the -D option of
1500
# gcc). The argument of the tag is a list of macros of the form: name
1501
# or name=definition (no spaces). If the definition and the = are
1502
# omitted =1 is assumed. To prevent a macro definition from being
1503
# undefined via #undef or recursively expanded use the := operator
1504
# instead of the = operator.
1505
1506
PREDEFINED             =
1507
1508
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1509
# this tag can be used to specify a list of macro names that should be expanded.
1510
# The macro definition that is found in the sources will be used.
1511
# Use the PREDEFINED tag if you want to use a different macro definition that
1512
# overrules the definition found in the source code.
1513
1514
EXPAND_AS_DEFINED      =
1515
1516
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1517
# doxygen's preprocessor will remove all references to function-like macros
1518
# that are alone on a line, have an all uppercase name, and do not end with a
1519
# semicolon, because these will confuse the parser if not removed.
1520
1521
SKIP_FUNCTION_MACROS   = YES
1522
1523
#---------------------------------------------------------------------------
1524
# Configuration::additions related to external references
1525
#---------------------------------------------------------------------------
1526
1527
# The TAGFILES option can be used to specify one or more tagfiles.
1528
# Optionally an initial location of the external documentation
1529
# can be added for each tagfile. The format of a tag file without
1530
# this location is as follows:
1531
#
1532
# TAGFILES = file1 file2 ...
1533
# Adding location for the tag files is done as follows:
1534
#
1535
# TAGFILES = file1=loc1 "file2 = loc2" ...
1536
# where "loc1" and "loc2" can be relative or absolute paths or
1537
# URLs. If a location is present for each tag, the installdox tool
1538
# does not have to be run to correct the links.
1539
# Note that each tag file must have a unique name
1540
# (where the name does NOT include the path)
1541
# If a tag file is not located in the directory in which doxygen
1542
# is run, you must also specify the path to the tagfile here.
1543
1544
TAGFILES               =
1545
1546
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1547
# a tag file that is based on the input files it reads.
1548
1549
GENERATE_TAGFILE       =
1550
1551
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1552
# in the class index. If set to NO only the inherited external classes
1553
# will be listed.
1554
1555
ALLEXTERNALS           = NO
1556
1557
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1558
# in the modules index. If set to NO, only the current project's groups will
1559
# be listed.
1560
1561
EXTERNAL_GROUPS        = YES
1562
1563
# The PERL_PATH should be the absolute path and name of the perl script
1564
# interpreter (i.e. the result of `which perl').
1565
1566
PERL_PATH              = /usr/bin/perl
1567
1568
#---------------------------------------------------------------------------
1569
# Configuration options related to the dot tool
1570
#---------------------------------------------------------------------------
1571
1572
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1573
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1574
# or super classes. Setting the tag to NO turns the diagrams off. Note that
1575
# this option also works with HAVE_DOT disabled, but it is recommended to
1576
# install and use dot, since it yields more powerful graphs.
1577
1578
CLASS_DIAGRAMS         = YES
1579
1580
# You can define message sequence charts within doxygen comments using the \msc
1581
# command. Doxygen will then run the mscgen tool (see
1582
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1583
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1584
# the mscgen tool resides. If left empty the tool is assumed to be found in the
1585
# default search path.
1586
1587
MSCGEN_PATH            =
1588
1589
# If set to YES, the inheritance and collaboration graphs will hide
1590
# inheritance and usage relations if the target is undocumented
1591
# or is not a class.
1592
1593
HIDE_UNDOC_RELATIONS   = YES
1594
1595
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1596
# available from the path. This tool is part of Graphviz, a graph visualization
1597
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1598
# have no effect if this option is set to NO (the default)
1599
1600
HAVE_DOT               = NO
1601
1602
# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1603
# allowed to run in parallel. When set to 0 (the default) doxygen will
1604
# base this on the number of processors available in the system. You can set it
1605
# explicitly to a value larger than 0 to get control over the balance
1606
# between CPU load and processing speed.
1607
1608
DOT_NUM_THREADS        = 0
1609
1610
# By default doxygen will use the Helvetica font for all dot files that
1611
# doxygen generates. When you want a differently looking font you can specify
1612
# the font name using DOT_FONTNAME. You need to make sure dot is able to find
1613
# the font, which can be done by putting it in a standard location or by setting
1614
# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
1615
# directory containing the font.
1616
1617
DOT_FONTNAME           = Helvetica
1618
1619
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1620
# The default size is 10pt.
1621
1622
DOT_FONTSIZE           = 10
1623
1624
# By default doxygen will tell dot to use the Helvetica font.
1625
# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
1626
# set the path where dot can find it.
1627
1628
DOT_FONTPATH           =
1629
1630
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1631
# will generate a graph for each documented class showing the direct and
1632
# indirect inheritance relations. Setting this tag to YES will force the
1633
# CLASS_DIAGRAMS tag to NO.
1634
1635
CLASS_GRAPH            = YES
1636
1637
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1638
# will generate a graph for each documented class showing the direct and
1639
# indirect implementation dependencies (inheritance, containment, and
1640
# class references variables) of the class with other documented classes.
1641
1642
COLLABORATION_GRAPH    = YES
1643
1644
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1645
# will generate a graph for groups, showing the direct groups dependencies
1646
1647
GROUP_GRAPHS           = YES
1648
1649
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1650
# collaboration diagrams in a style similar to the OMG's Unified Modeling
1651
# Language.
1652
1653
UML_LOOK               = NO
1654
1655
# If set to YES, the inheritance and collaboration graphs will show the
1656
# relations between templates and their instances.
1657
1658
TEMPLATE_RELATIONS     = NO
1659
1660
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1661
# tags are set to YES then doxygen will generate a graph for each documented
1662
# file showing the direct and indirect include dependencies of the file with
1663
# other documented files.
1664
1665
INCLUDE_GRAPH          = YES
1666
1667
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1668
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1669
# documented header file showing the documented files that directly or
1670
# indirectly include this file.
1671
1672
INCLUDED_BY_GRAPH      = YES
1673
1674
# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1675
# doxygen will generate a call dependency graph for every global function
1676
# or class method. Note that enabling this option will significantly increase
1677
# the time of a run. So in most cases it will be better to enable call graphs
1678
# for selected functions only using the \callgraph command.
1679
1680
CALL_GRAPH             = NO
1681
1682
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1683
# doxygen will generate a caller dependency graph for every global function
1684
# or class method. Note that enabling this option will significantly increase
1685
# the time of a run. So in most cases it will be better to enable caller
1686
# graphs for selected functions only using the \callergraph command.
1687
1688
CALLER_GRAPH           = NO
1689
1690
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1691
# will generate a graphical hierarchy of all classes instead of a textual one.
1692
1693
GRAPHICAL_HIERARCHY    = YES
1694
1695
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1696
# then doxygen will show the dependencies a directory has on other directories
1697
# in a graphical way. The dependency relations are determined by the #include
1698
# relations between the files in the directories.
1699
1700
DIRECTORY_GRAPH        = YES
1701
1702
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1703
# generated by dot. Possible values are svg, png, jpg, or gif.
1704
# If left blank png will be used. If you choose svg you need to set
1705
# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1706
# visible in IE 9+ (other browsers do not have this requirement).
1707
1708
DOT_IMAGE_FORMAT       = png
1709
1710
# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
1711
# enable generation of interactive SVG images that allow zooming and panning.
1712
# Note that this requires a modern browser other than Internet Explorer.
1713
# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
1714
# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1715
# visible. Older versions of IE do not have SVG support.
1716
1717
INTERACTIVE_SVG        = NO
1718
1719
# The tag DOT_PATH can be used to specify the path where the dot tool can be
1720
# found. If left blank, it is assumed the dot tool can be found in the path.
1721
1722
DOT_PATH               =
1723
1724
# The DOTFILE_DIRS tag can be used to specify one or more directories that
1725
# contain dot files that are included in the documentation (see the
1726
# \dotfile command).
1727
1728
DOTFILE_DIRS           =
1729
1730
# The MSCFILE_DIRS tag can be used to specify one or more directories that
1731
# contain msc files that are included in the documentation (see the
1732
# \mscfile command).
1733
1734
MSCFILE_DIRS           =
1735
1736
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1737
# nodes that will be shown in the graph. If the number of nodes in a graph
1738
# becomes larger than this value, doxygen will truncate the graph, which is
1739
# visualized by representing a node as a red box. Note that doxygen if the
1740
# number of direct children of the root node in a graph is already larger than
1741
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1742
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1743
1744
DOT_GRAPH_MAX_NODES    = 50
1745
1746
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1747
# graphs generated by dot. A depth value of 3 means that only nodes reachable
1748
# from the root by following a path via at most 3 edges will be shown. Nodes
1749
# that lay further from the root node will be omitted. Note that setting this
1750
# option to 1 or 2 may greatly reduce the computation time needed for large
1751
# code bases. Also note that the size of a graph can be further restricted by
1752
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1753
1754
MAX_DOT_GRAPH_DEPTH    = 0
1755
1756
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1757
# background. This is disabled by default, because dot on Windows does not
1758
# seem to support this out of the box. Warning: Depending on the platform used,
1759
# enabling this option may lead to badly anti-aliased labels on the edges of
1760
# a graph (i.e. they become hard to read).
1761
1762
DOT_TRANSPARENT        = NO
1763
1764
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1765
# files in one run (i.e. multiple -o and -T options on the command line). This
1766
# makes dot run faster, but since only newer versions of dot (>1.8.10)
1767
# support this, this feature is disabled by default.
1768
1769
DOT_MULTI_TARGETS      = YES
1770
1771
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1772
# generate a legend page explaining the meaning of the various boxes and
1773
# arrows in the dot generated graphs.
1774
1775
GENERATE_LEGEND        = YES
1776
1777
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1778
# remove the intermediate dot files that are used to generate
1779
# the various graphs.
1780
1781
DOT_CLEANUP            = YES