AMiRo-OS

/*

AMiRo-OS is an operating system designed for the Autonomous Mini Robot (AMiRo) platform.

Copyright (C) 2016..2019  Thomas Schöpping et al.

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program.  If not, see <http://www.gnu.org/licenses/>.

*/

#ifndef BOARD_H

#define BOARD_H

/*

 * Setup for the ST NUCLEO64-F103RB board.

 */

/*

 * Board identifier.

 */

#define BOARD_ST_NUCLEO64_F103RB

#define BOARD_NAME              "STMicroelectronics NUCLEO-F103RB"

/*

 * Board frequencies.

 */

#define STM32_LSECLK            0

#if defined(NUCLEO_EXTERNAL_OSCILLATOR)

#define STM32_HSECLK            8000000

#define STM32_HSE_BYPASS

#elif defined(NUCLEO_HSE_CRYSTAL)

#define STM32_HSECLK            8000000

#else

#define STM32_HSECLK            0

#endif

/*

 * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

 */

#define STM32F103xB

/*

 * IO pins assignments.

 */

#define GPIOA_ARD_A0                0U

#define GPIOA_ADC1_IN0              0U

#define GPIOA_ARD_A1                1U

#define GPIOA_ADC1_IN1              1U

#define GPIOA_ARD_D1                2U

#define GPIOA_USART2_TX             2U

#define GPIOA_ARD_D0                3U

#define GPIOA_USART2_RX             3U

#define GPIOA_ARD_A2                4U

#define GPIOA_ADC1_IN4              4U

#define GPIOA_LED_GREEN             5U

#define GPIOA_ARD_D13               5U

#define GPIOA_ARD_D12               6U

#define GPIOA_ARD_D11               7U

#define GPIOA_ARD_D7                8U

#define GPIOA_ARD_D8                9U

#define GPIOA_ARD_D2                10U

#define GPIOA_PIN11                 11U

#define GPIOA_PIN12                 12U

#define GPIOA_SWDIO                 13U

#define GPIOA_SWCLK                 14U

#define GPIOA_PIN15                 15U

#define GPIOB_ARD_A3                0U

#define GPIOB_ADC1_IN8              0U

#define GPIOB_PIN1                  1U

#define GPIOB_PIN2                  2U

#define GPIOB_SWO                   3U

#define GPIOB_ARD_D3                3U

#define GPIOB_ARD_D5                4U

#define GPIOB_ARD_D4                5U

#define GPIOB_ARD_D10               6U

#define GPIOB_PIN7                  7U

#define GPIOB_ARD_D15               8U

#define GPIOB_ARD_D14               9U

#define GPIOB_ARD_D6                10U

#define GPIOB_PIN11                 11U

#define GPIOB_PIN12                 12U

#define GPIOB_PIN13                 13U

#define GPIOB_PIN14                 14U

#define GPIOB_PIN15                 15U

#define GPIOC_ARD_A5                0U

#define GPIOC_ADC1_IN11             0U

#define GPIOC_ARD_A4                1U

#define GPIOC_ADC1_IN10             1U

#define GPIOC_PIN2                  2U

#define GPIOC_PIN3                  3U

#define GPIOC_PIN4                  4U

#define GPIOC_PIN5                  5U

#define GPIOC_PIN6                  6U

#define GPIOC_ARD_D9                7U

#define GPIOC_PIN8                  8U

#define GPIOC_PIN9                  9U

#define GPIOC_PIN10                 10U

#define GPIOC_PIN11                 11U

#define GPIOC_PIN12                 12U

#define GPIOC_BUTTON                13U

#define GPIOC_PIN14                 14U

#define GPIOC_PIN15                 15U

#define GPIOD_OSC_IN                0U

#define GPIOD_PIN0                  0U

#define GPIOD_OSC_OUT               1U

#define GPIOD_PIN1                  1U

#define GPIOD_PIN2                  2U

#define GPIOD_PIN3                  3U

#define GPIOD_PIN4                  4U

#define GPIOD_PIN5                  5U

#define GPIOD_PIN6                  6U

#define GPIOD_PIN7                  7U

#define GPIOD_PIN8                  8U

#define GPIOD_PIN9                  9U

#define GPIOD_PIN10                 10U

#define GPIOD_PIN11                 11U

#define GPIOD_PIN12                 12U

#define GPIOD_PIN13                 13U

#define GPIOD_PIN14                 14U

#define GPIOD_PIN15                 15U

#define GPIOE_PIN0                  0U

#define GPIOE_PIN1                  1U

#define GPIOE_PIN2                  2U

#define GPIOE_PIN3                  3U

#define GPIOE_PIN4                  4U

#define GPIOE_PIN5                  5U

#define GPIOE_PIN6                  6U

#define GPIOE_PIN7                  7U

#define GPIOE_PIN8                  8U

#define GPIOE_PIN9                  9U

#define GPIOE_PIN10                 10U

#define GPIOE_PIN11                 11U

#define GPIOE_PIN12                 12U

#define GPIOE_PIN13                 13U

#define GPIOE_PIN14                 14U

#define GPIOE_PIN15                 15U

#define GPIOF_PIN0                  0U

#define GPIOF_PIN1                  1U

#define GPIOF_PIN2                  2U

#define GPIOF_PIN3                  3U

#define GPIOF_PIN4                  4U

#define GPIOF_PIN5                  5U

#define GPIOF_PIN6                  6U

#define GPIOF_PIN7                  7U

#define GPIOF_PIN8                  8U

#define GPIOF_PIN9                  9U

#define GPIOF_PIN10                 10U

#define GPIOF_PIN11                 11U

#define GPIOF_PIN12                 12U

#define GPIOF_PIN13                 13U

#define GPIOF_PIN14                 14U

#define GPIOF_PIN15                 15U

/*

 * I/O ports initial setup, this configuration is established soon after reset

 * in the initialization code.

 *

 * The digits have the following meaning:

 *   0 - Analog input.

 *   1 - Push Pull output 10MHz.

 *   2 - Push Pull output 2MHz.

 *   3 - Push Pull output 50MHz.

 *   4 - Digital input.

 *   5 - Open Drain output 10MHz.

 *   6 - Open Drain output 2MHz.

 *   7 - Open Drain output 50MHz.

 *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

 *   9 - Alternate Push Pull output 10MHz.

 *   A - Alternate Push Pull output 2MHz.

 *   B - Alternate Push Pull output 50MHz.

 *   C - Reserved.

 *   D - Alternate Open Drain output 10MHz.

 *   E - Alternate Open Drain output 2MHz.

 *   F - Alternate Open Drain output 50MHz.

 * Please refer to the STM32 Reference Manual for details.

 */

/*

 * Port A setup.

 * Everything input with pull-up except:

 * PA2  - Alternate output          (GPIOA_ARD_D1, GPIOA_USART2_TX).

 * PA3  - Normal input              (GPIOA_ARD_D0, GPIOA_USART2_RX).

 * PA5  - Push Pull output          (GPIOA_LED_GREEN).

 * PA13 - Pull-up input             (GPIOA_SWDIO).

 * PA14 - Pull-down input           (GPIOA_SWCLK).

 */

#define VAL_GPIOACRL            0x88384B88      /*  PA7...PA0 */

#define VAL_GPIOACRH            0x88888888      /* PA15...PA8 */

#define VAL_GPIOAODR            0xFFFFBFDF

/*

 * Port B setup.

 * Everything input with pull-up except:

 * PB3  - Pull-up input             (GPIOA_SWO).

 */

#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */

#define VAL_GPIOBCRH            0x88888888      /* PB15...PB8 */

#define VAL_GPIOBODR            0xFFFFFFFF

/*

 * Port C setup.

 * Everything input with pull-up except:

 * PC13 - Normal input              (GPIOC_BUTTON).

 */

#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */

#define VAL_GPIOCCRH            0x88488888      /* PC15...PC8 */

#define VAL_GPIOCODR            0xFFFFFFFF

/*

 * Port D setup.

 * Everything input with pull-up except:

 * PD0  - Normal input              (GPIOD_OSC_IN).

 * PD1  - Normal input              (GPIOD_OSC_OUT).

 */

#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */

#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */

#define VAL_GPIODODR            0xFFFFFFFF

/*

 * Port E setup.

 * Everything input with pull-up except:

 */

#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */

#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */

#define VAL_GPIOEODR            0xFFFFFFFF

/*

 * USB bus activation macro, required by the USB driver.

 */

#define usb_lld_connect_bus(usbp)

/*

 * USB bus de-activation macro, required by the USB driver.

 */

#define usb_lld_disconnect_bus(usbp)

#if !defined(_FROM_ASM_)

#ifdef __cplusplus

extern "C" {

#endif

  void boardInit(void);

#ifdef __cplusplus

}

#endif

#endif /* _FROM_ASM_ */

#endif /* BOARD_H */