Statistics
| Branch: | Tag: | Revision:

amiro-os / modules / NUCLEO-F103RB / board.h @ 6ff06bbf

History | View | Annotate | Download (8.46 KB)

1
/*
2
    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
3

4
    Licensed under the Apache License, Version 2.0 (the "License");
5
    you may not use this file except in compliance with the License.
6
    You may obtain a copy of the License at
7

8
        http://www.apache.org/licenses/LICENSE-2.0
9

10
    Unless required by applicable law or agreed to in writing, software
11
    distributed under the License is distributed on an "AS IS" BASIS,
12
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13
    See the License for the specific language governing permissions and
14
    limitations under the License.
15
*/
16

    
17
#ifndef BOARD_H
18
#define BOARD_H
19

    
20
/*
21
 * Setup for the ST NUCLEO64-F103RB board.
22
 */
23

    
24
/*
25
 * Board identifier.
26
 */
27
#define BOARD_ST_NUCLEO64_F103RB
28
#define BOARD_NAME              "STMicroelectronics NUCLEO-F103RB"
29

    
30
/*
31
 * Board frequencies.
32
 */
33
#define STM32_LSECLK            0
34

    
35
#if defined(NUCLEO_EXTERNAL_OSCILLATOR)
36
#define STM32_HSECLK            8000000
37
#define STM32_HSE_BYPASS
38

    
39
#elif defined(NUCLEO_HSE_CRYSTAL)
40
#define STM32_HSECLK            8000000
41

    
42
#else
43
#define STM32_HSECLK            0
44
#endif
45

    
46
/*
47
 * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
48
 */
49
#define STM32F103xB
50

    
51
/*
52
 * IO pins assignments.
53
 */
54
#define GPIOA_ARD_A0                0U
55
#define GPIOA_ADC1_IN0              0U
56
#define GPIOA_ARD_A1                1U
57
#define GPIOA_ADC1_IN1              1U
58
#define GPIOA_ARD_D1                2U
59
#define GPIOA_USART2_TX             2U
60
#define GPIOA_ARD_D0                3U
61
#define GPIOA_USART2_RX             3U
62
#define GPIOA_ARD_A2                4U
63
#define GPIOA_ADC1_IN4              4U
64
#define GPIOA_LED_GREEN             5U
65
#define GPIOA_ARD_D13               5U
66
#define GPIOA_ARD_D12               6U
67
#define GPIOA_ARD_D11               7U
68
#define GPIOA_ARD_D7                8U
69
#define GPIOA_ARD_D8                9U
70
#define GPIOA_ARD_D2                10U
71
#define GPIOA_PIN11                 11U
72
#define GPIOA_PIN12                 12U
73
#define GPIOA_SWDIO                 13U
74
#define GPIOA_SWCLK                 14U
75
#define GPIOA_PIN15                 15U
76

    
77
#define GPIOB_ARD_A3                0U
78
#define GPIOB_ADC1_IN8              0U
79
#define GPIOB_PIN1                  1U
80
#define GPIOB_PIN2                  2U
81
#define GPIOB_SWO                   3U
82
#define GPIOB_ARD_D3                3U
83
#define GPIOB_ARD_D5                4U
84
#define GPIOB_ARD_D4                5U
85
#define GPIOB_ARD_D10               6U
86
#define GPIOB_PIN7                  7U
87
#define GPIOB_ARD_D15               8U
88
#define GPIOB_ARD_D14               9U
89
#define GPIOB_ARD_D6                10U
90
#define GPIOB_PIN11                 11U
91
#define GPIOB_PIN12                 12U
92
#define GPIOB_PIN13                 13U
93
#define GPIOB_PIN14                 14U
94
#define GPIOB_PIN15                 15U
95

    
96
#define GPIOC_ARD_A5                0U
97
#define GPIOC_ADC1_IN11             0U
98
#define GPIOC_ARD_A4                1U
99
#define GPIOC_ADC1_IN10             1U
100
#define GPIOC_PIN2                  2U
101
#define GPIOC_PIN3                  3U
102
#define GPIOC_PIN4                  4U
103
#define GPIOC_PIN5                  5U
104
#define GPIOC_PIN6                  6U
105
#define GPIOC_ARD_D9                7U
106
#define GPIOC_PIN8                  8U
107
#define GPIOC_PIN9                  9U
108
#define GPIOC_PIN10                 10U
109
#define GPIOC_PIN11                 11U
110
#define GPIOC_PIN12                 12U
111
#define GPIOC_BUTTON                13U
112
#define GPIOC_PIN14                 14U
113
#define GPIOC_PIN15                 15U
114

    
115
#define GPIOD_OSC_IN                0U
116
#define GPIOD_PIN0                  0U
117
#define GPIOD_OSC_OUT               1U
118
#define GPIOD_PIN1                  1U
119
#define GPIOD_PIN2                  2U
120
#define GPIOD_PIN3                  3U
121
#define GPIOD_PIN4                  4U
122
#define GPIOD_PIN5                  5U
123
#define GPIOD_PIN6                  6U
124
#define GPIOD_PIN7                  7U
125
#define GPIOD_PIN8                  8U
126
#define GPIOD_PIN9                  9U
127
#define GPIOD_PIN10                 10U
128
#define GPIOD_PIN11                 11U
129
#define GPIOD_PIN12                 12U
130
#define GPIOD_PIN13                 13U
131
#define GPIOD_PIN14                 14U
132
#define GPIOD_PIN15                 15U
133

    
134
#define GPIOE_PIN0                  0U
135
#define GPIOE_PIN1                  1U
136
#define GPIOE_PIN2                  2U
137
#define GPIOE_PIN3                  3U
138
#define GPIOE_PIN4                  4U
139
#define GPIOE_PIN5                  5U
140
#define GPIOE_PIN6                  6U
141
#define GPIOE_PIN7                  7U
142
#define GPIOE_PIN8                  8U
143
#define GPIOE_PIN9                  9U
144
#define GPIOE_PIN10                 10U
145
#define GPIOE_PIN11                 11U
146
#define GPIOE_PIN12                 12U
147
#define GPIOE_PIN13                 13U
148
#define GPIOE_PIN14                 14U
149
#define GPIOE_PIN15                 15U
150

    
151
#define GPIOF_PIN0                  0U
152
#define GPIOF_PIN1                  1U
153
#define GPIOF_PIN2                  2U
154
#define GPIOF_PIN3                  3U
155
#define GPIOF_PIN4                  4U
156
#define GPIOF_PIN5                  5U
157
#define GPIOF_PIN6                  6U
158
#define GPIOF_PIN7                  7U
159
#define GPIOF_PIN8                  8U
160
#define GPIOF_PIN9                  9U
161
#define GPIOF_PIN10                 10U
162
#define GPIOF_PIN11                 11U
163
#define GPIOF_PIN12                 12U
164
#define GPIOF_PIN13                 13U
165
#define GPIOF_PIN14                 14U
166
#define GPIOF_PIN15                 15U
167
/*
168
 * I/O ports initial setup, this configuration is established soon after reset
169
 * in the initialization code.
170
 *
171
 * The digits have the following meaning:
172
 *   0 - Analog input.
173
 *   1 - Push Pull output 10MHz.
174
 *   2 - Push Pull output 2MHz.
175
 *   3 - Push Pull output 50MHz.
176
 *   4 - Digital input.
177
 *   5 - Open Drain output 10MHz.
178
 *   6 - Open Drain output 2MHz.
179
 *   7 - Open Drain output 50MHz.
180
 *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
181
 *   9 - Alternate Push Pull output 10MHz.
182
 *   A - Alternate Push Pull output 2MHz.
183
 *   B - Alternate Push Pull output 50MHz.
184
 *   C - Reserved.
185
 *   D - Alternate Open Drain output 10MHz.
186
 *   E - Alternate Open Drain output 2MHz.
187
 *   F - Alternate Open Drain output 50MHz.
188
 * Please refer to the STM32 Reference Manual for details.
189
 */
190

    
191
/*
192
 * Port A setup.
193
 * Everything input with pull-up except:
194
 * PA2  - Alternate output          (GPIOA_ARD_D1, GPIOA_USART2_TX).
195
 * PA3  - Normal input              (GPIOA_ARD_D0, GPIOA_USART2_RX).
196
 * PA5  - Push Pull output          (GPIOA_LED_GREEN).
197
 * PA13 - Pull-up input             (GPIOA_SWDIO).
198
 * PA14 - Pull-down input           (GPIOA_SWCLK).
199
 */
200
#define VAL_GPIOACRL            0x88384B88      /*  PA7...PA0 */
201
#define VAL_GPIOACRH            0x88888888      /* PA15...PA8 */
202
#define VAL_GPIOAODR            0xFFFFBFDF
203

    
204
/*
205
 * Port B setup.
206
 * Everything input with pull-up except:
207
 * PB3  - Pull-up input             (GPIOA_SWO).
208
 */
209
#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
210
#define VAL_GPIOBCRH            0x88888888      /* PB15...PB8 */
211
#define VAL_GPIOBODR            0xFFFFFFFF
212

    
213
/*
214
 * Port C setup.
215
 * Everything input with pull-up except:
216
 * PC13 - Normal input              (GPIOC_BUTTON).
217
 */
218
#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
219
#define VAL_GPIOCCRH            0x88488888      /* PC15...PC8 */
220
#define VAL_GPIOCODR            0xFFFFFFFF
221

    
222
/*
223
 * Port D setup.
224
 * Everything input with pull-up except:
225
 * PD0  - Normal input              (GPIOD_OSC_IN).
226
 * PD1  - Normal input              (GPIOD_OSC_OUT).
227
 */
228
#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
229
#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
230
#define VAL_GPIODODR            0xFFFFFFFF
231

    
232
/*
233
 * Port E setup.
234
 * Everything input with pull-up except:
235
 */
236
#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
237
#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
238
#define VAL_GPIOEODR            0xFFFFFFFF
239

    
240
/*
241
 * USB bus activation macro, required by the USB driver.
242
 */
243
#define usb_lld_connect_bus(usbp)
244

    
245
/*
246
 * USB bus de-activation macro, required by the USB driver.
247
 */
248
#define usb_lld_disconnect_bus(usbp)
249

    
250
#if !defined(_FROM_ASM_)
251
#ifdef __cplusplus
252
extern "C" {
253
#endif
254
  void boardInit(void);
255
#ifdef __cplusplus
256
}
257
#endif
258
#endif /* _FROM_ASM_ */
259

    
260
#endif /* BOARD_H */