AMiRo-OS

/*

AMiRo-OS is an operating system designed for the Autonomous Mini Robot (AMiRo) platform.

Copyright (C) 2016..2018  Thomas Schöpping et al.

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program.  If not, see <http://www.gnu.org/licenses/>.

*/

#ifndef _AMIROOS_MODULE_H_

#define _AMIROOS_MODULE_H_

/*===========================================================================*/

/**

 * @name Module specific functions

 * @{

 */

/*===========================================================================*/

/** @} */

/*===========================================================================*/

/**

 * @name ChibiOS/HAL configuration

 * @{

 */

/*===========================================================================*/

#include <hal.h>

/**

 * @brief   CAN driver to use.

 */

#define MODULE_HAL_CAN                          CAND1

/**

 * @brief   Configuration for the CAN driver.

 */

extern CANConfig moduleHalCanConfig;

/**

 * @brief   Interrupt driver to use.

 */

#define MODULE_HAL_EXT                          EXTD1

/**

 * @brief   Interrupt driver configuration.

 */

extern EXTConfig moduleHalExtConfig;

/**

 * @brief   I2C driver to access the EEPROM.

 */

#define MODULE_HAL_I2C_EEPROM                   I2CD2

/**

 * @brief   Configuration for the EEPROM I2C driver.

 */

extern I2CConfig moduleHalI2cEepromConfig;

/**

 * @brief   Serial driver of the programmer interface.

 */

#define MODULE_HAL_PROGIF                       SD1

/**

 * @brief   Configuration for the programmer serial interface driver.

 */

extern SerialConfig moduleHalProgIfConfig;

/**

 * @brief   SPI interface driver for the motion sensors (gyroscope and accelerometer).

 */

#define MODULE_HAL_SPI_LIGHT                    SPID1

/**

 * @brief   Configuration for the SPI interface driver to communicate with the LED driver.

 */

extern SPIConfig moduleHalSpiLightConfig;

/** @} */

/*===========================================================================*/

/**

 * @name GPIO definitions

 * @{

 */

/*===========================================================================*/

#include <amiro-lld.h>

/**

 * @brief   Interrupt channel for the SYS_SYNC signal.

 */

#define MODULE_GPIO_EXTCHANNEL_SYSSYNC          ((expchannel_t)2)

/**

 * @brief   Interrupt channel for the LASER_OC signal.

 */

#define MODULE_GPIO_EXTCHANNEL_LASEROC          ((expchannel_t)5)

/**

 * @brief   Interrupt channel for the SYS_UART_DN signal.

 */

#define MODULE_GPIO_EXTCHANNEL_SYSUARTDN        ((expchannel_t)6)

/**

 * @brief   Interrupt channel for the WL_GDO2 signal.

 */

#define MODULE_GPIO_EXTCHANNEL_WLGDO2           ((expchannel_t)8)

/**

 * @brief   Interrupt channel for the WL_GDO0 signal.

 */

#define MODULE_GPIO_EXTCHANNEL_WLGDO0           ((expchannel_t)9)

/**

 * @brief   Interrupt channel for the SYS_PD signal.

 */

#define MODULE_GPIO_EXTCHANNEL_SYSPD            ((expchannel_t)14)

/**

 * @brief   LIGHT_BANK output signal GPIO.

 */

extern apalGpio_t moduleGpioLightBlank;

/**

 * @brief   LASER_EN output signal GPIO.

 */

extern apalGpio_t moduleGpioLaserEn;

/**

 * @brief   LASER_OC input signal GPIO.

 */

extern apalGpio_t moduleGpioLaserOc;

/**

 * @brief   SYS_UART_DN bidirectional signal GPIO.

 */

extern apalGpio_t moduleGpioSysUartDn;

/**

 * @brief   WL_GDO2 input signal GPIO.

 */

extern apalGpio_t moduleGpioWlGdo2;

/**

 * @brief   WL_GDO0 input signal GPIO.

 */

extern apalGpio_t moduleGpioWlGdo0;

/**

 * @brief   LIGHT_XLAT output signal GPIO.

 */

extern apalGpio_t moduleGpioLightXlat;

/**

 * @brief   SYS_PD bidirectional signal GPIO.

 */

extern apalGpio_t moduleGpioSysPd;

/**

 * @brief   SYS_SYNC bidirectional signal GPIO.

 */

extern apalGpio_t moduleGpioSysSync;

/** @} */

/*===========================================================================*/

/**

 * @name AMiRo-OS core configurations

 * @{

 */

/*===========================================================================*/

/**

 * @brief   Event flag to be set on a LASER_OC interrupt.

 */

#define MODULE_OS_IOEVENTFLAGS_LASEROC          ((eventflags_t)(1 << MODULE_GPIO_EXTCHANNEL_LASEROC))

/**

 * @brief   Event flag to be set on a SYS_UART_DN interrupt.

 */

#define MODULE_OS_IOEVENTFLAGS_SYSUARTDN        ((eventflags_t)(1 << MODULE_GPIO_EXTCHANNEL_SYSUARTDN))

/**

 * @brief   Event flag to be set on a WL_GDO2 interrupt.

 */

#define MODULE_OS_IOEVENTFLAGS_WLGDO2           ((eventflags_t)(1 << MODULE_GPIO_EXTCHANNEL_WLGDO2))

/**

 * @brief   Event flag to be set on a WL_GDO0 interrupt.

 */

#define MODULE_OS_IOEVENTFLAGS_WLGDO0           ((eventflags_t)(1 << MODULE_GPIO_EXTCHANNEL_WLGDO0))

/**

 * @brief   Event flag to be set on a SYS_PD interrupt.

 */

#define MODULE_OS_IOEVENTFLAGS_SYSPD            ((eventflags_t)(1 << MODULE_GPIO_EXTCHANNEL_SYSPD))

/**

 * @brief   Event flag to be set on a SYS_SYNC interrupt.

 */

#define MODULE_OS_IOEVENTFLAGS_SYSSYNC          ((eventflags_t)(1 << MODULE_GPIO_EXTCHANNEL_SYSSYNC))

/**

 * @brief   PD signal for SSSP.

 */

extern apalControlGpio_t moduleSsspPd;

/**

 * @brief   SYNC signal for SSSP.

 */

extern apalControlGpio_t moduleSsspSync;

/**

 * @brief   Shell prompt text.

 */

extern const char* moduleShellPrompt;

/**

 * @brief   Unit test initialization hook.

 */

#define MODULE_INIT_TESTS() {                                                 \

  /* add unit-test shell commands */                                          \

  aosShellAddCommand(aos.shell, &moduleUtAlldAt24c01bn.shellcmd);             \

  aosShellAddCommand(aos.shell, &moduleUtAlldTlc5947.shellcmd);               \

  aosShellAddCommand(aos.shell, &moduleUtAlldTps2051bdbv.shellcmd);           \

}

/**

 * @brief   Periphery communication interfaces initialization hook.

 */

#define MODULE_INIT_PERIPHERY_COMM() {                                        \

  /* serial driver */                                                         \

  sdStart(&MODULE_HAL_PROGIF, &moduleHalProgIfConfig);                        \

  /* I2C */                                                                   \

  moduleHalI2cEepromConfig.clock_speed = (AT24C01BN_LLD_I2C_MAXFREQUENCY < moduleHalI2cEepromConfig.clock_speed) ? AT24C01BN_LLD_I2C_MAXFREQUENCY : moduleHalI2cEepromConfig.clock_speed; \

  moduleHalI2cEepromConfig.duty_cycle = (moduleHalI2cEepromConfig.clock_speed <= 100000) ? STD_DUTY_CYCLE : FAST_DUTY_CYCLE_2;  \

  i2cStart(&MODULE_HAL_I2C_EEPROM, &moduleHalI2cEepromConfig);                \

  /* SPI */                                                                   \

  spiStart(&MODULE_HAL_SPI_LIGHT, &moduleHalSpiLightConfig);                  \

}

/**

 * @brief   Hook to handle IO events during SSSP startup synchronization.

 */

#define MODULE_SSP_STARTUP_OUTRO_IO_EVENT(mask, flags) {                      \

  /* ignore all events */                                                     \

  (void)mask;                                                                 \

  (void)flags;                                                                \

}

/**

 * @brief   Periphery communication interface deinitialization hook.

 */

#define MODULE_SHUTDOWN_PERIPHERY_COMM() {                                    \

  /* SPI */                                                                   \

  spiStop(&MODULE_HAL_SPI_LIGHT);                                             \

  /* I2C */                                                                   \

  i2cStop(&MODULE_HAL_I2C_EEPROM);                                            \

  /* don't stop the serial driver so messages can still be printed */         \

}

/** @} */

/*===========================================================================*/

/**

 * @name Low-level drivers

 * @{

 */

/*===========================================================================*/

#include <alld_at24c01bn-sh-b.h>

#include <alld_tlc5947.h>

#include <alld_tps2051bdbv.h>

/**

 * @brief   EEPROM driver.

 */

extern AT24C01BNDriver moduleLldEeprom;

/**

 * @brief   LED PWM driver.

 */

extern TLC5947Driver moduleLldLedPwm;

/**

 * @brief   Power switch driver for the laser supply power.

 */

extern TPS2051BDriver moduleLldPowerSwitchLaser;

/** @} */

/*===========================================================================*/

/**

 * @name Unit tests (UT)

 * @{

 */

/*===========================================================================*/

#if (AMIROOS_CFG_TESTS_ENABLE == true) || defined(__DOXYGEN__)

#include <ut_alld_at24c01bn-sh-b.h>

#include <ut_alld_tlc5947.h>

#include <ut_alld_tps2051bdbv.h>

/**

 * @brief   EEPROM unit test object.

 */

extern aos_unittest_t moduleUtAlldAt24c01bn;

/**

 * @brief   LED PWM driver unit test object.

 */

extern aos_unittest_t moduleUtAlldTlc5947;

/**

 * @brief   Current-limited power switch (Laser output)

 */

extern aos_unittest_t moduleUtAlldTps2051bdbv;

#endif /* AMIROOS_CFG_TESTS_ENABLE == true */

/** @} */

#endif /* _AMIROOS_MODULE_H_ */