amiro-os / modules / DiWheelDrive_1-1 / board.h @ 8543d0d9
History | View | Annotate | Download (41.421 KB)
| 1 |
/*
|
|---|---|
| 2 |
AMiRo-OS is an operating system designed for the Autonomous Mini Robot (AMiRo) platform.
|
| 3 |
Copyright (C) 2016..2019 Thomas Schöpping et al.
|
| 4 |
|
| 5 |
This program is free software: you can redistribute it and/or modify
|
| 6 |
it under the terms of the GNU General Public License as published by
|
| 7 |
the Free Software Foundation, either version 3 of the License, or
|
| 8 |
(at your option) any later version.
|
| 9 |
|
| 10 |
This program is distributed in the hope that it will be useful,
|
| 11 |
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| 12 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
| 13 |
GNU General Public License for more details.
|
| 14 |
|
| 15 |
You should have received a copy of the GNU General Public License
|
| 16 |
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
| 17 |
*/
|
| 18 |
|
| 19 |
/**
|
| 20 |
* @file
|
| 21 |
* @brief DiWheeDrive v1.1 Board specific macros.
|
| 22 |
*
|
| 23 |
* @addtogroup diwheeldrive_board
|
| 24 |
* @{
|
| 25 |
*/
|
| 26 |
|
| 27 |
#ifndef _BOARD_H_
|
| 28 |
#define _BOARD_H_
|
| 29 |
|
| 30 |
/*
|
| 31 |
* Setup for AMiRo DiWheelDrive v1.1 board.
|
| 32 |
*/
|
| 33 |
|
| 34 |
/*
|
| 35 |
* Board identifier.
|
| 36 |
*/
|
| 37 |
#define BOARD_DIWHEELDRIVE
|
| 38 |
#define BOARD_NAME "AMiRo DiWheelDrive" |
| 39 |
#define BOARD_VERSION "1.1" |
| 40 |
|
| 41 |
/*
|
| 42 |
* Board oscillators-related settings.
|
| 43 |
* NOTE: LSE not fitted.
|
| 44 |
*/
|
| 45 |
#if !defined(STM32_LSECLK)
|
| 46 |
#define STM32_LSECLK 0U |
| 47 |
#endif
|
| 48 |
|
| 49 |
#if !defined(STM32_HSECLK)
|
| 50 |
#define STM32_HSECLK 8000000U |
| 51 |
#endif
|
| 52 |
|
| 53 |
/*
|
| 54 |
* Board voltages.
|
| 55 |
* Required for performance limits calculation.
|
| 56 |
*/
|
| 57 |
#define STM32_VDD 330U |
| 58 |
|
| 59 |
/*
|
| 60 |
* MCU type as defined in the ST header.
|
| 61 |
*/
|
| 62 |
#define STM32F103xE
|
| 63 |
|
| 64 |
/*
|
| 65 |
* IO pins assignments.
|
| 66 |
*/
|
| 67 |
#define GPIOA_WKUP 0U |
| 68 |
#define GPIOA_LED 1U |
| 69 |
#define GPIOA_DRIVE_PWM1A 2U |
| 70 |
#define GPIOA_DRIVE_PWM1B 3U |
| 71 |
#define GPIOA_PIN4 4U |
| 72 |
#define GPIOA_MOTION_SCLK 5U |
| 73 |
#define GPIOA_MOTION_MISO 6U |
| 74 |
#define GPIOA_MOTION_MOSI 7U |
| 75 |
#define GPIOA_PIN8 8U |
| 76 |
#define GPIOA_PROG_RX 9U |
| 77 |
#define GPIOA_PROG_TX 10U |
| 78 |
#define GPIOA_CAN_RX 11U |
| 79 |
#define GPIOA_CAN_TX 12U |
| 80 |
#define GPIOA_SWDIO 13U |
| 81 |
#define GPIOA_SWCLK 14U |
| 82 |
#define GPIOA_DRIVE_PWM2B 15U |
| 83 |
|
| 84 |
#define GPIOB_PIN0 0U |
| 85 |
#define GPIOB_DRIVE_SENSE2 1U |
| 86 |
#define GPIOB_POWER_EN 2U |
| 87 |
#define GPIOB_DRIVE_PWM2A 3U |
| 88 |
#define GPIOB_PIN4 4U |
| 89 |
#define GPIOB_COMPASS_DRDY 5U |
| 90 |
#define GPIOB_DRIVE_ENC1A 6U |
| 91 |
#define GPIOB_DRIVE_ENC1B 7U |
| 92 |
#define GPIOB_COMPASS_SCL 8U |
| 93 |
#define GPIOB_COMPASS_SDA 9U |
| 94 |
#define GPIOB_IR_SCL 10U |
| 95 |
#define GPIOB_IR_SDA 11U |
| 96 |
#define GPIOB_IR_INT 12U |
| 97 |
#define GPIOB_GYRO_DRDY 13U |
| 98 |
#define GPIOB_SYS_UART_UP 14U |
| 99 |
#define GPIOB_ACCEL_INT_N 15U |
| 100 |
|
| 101 |
#define GPIOC_DRIVE_SENSE1 0U |
| 102 |
#define GPIOC_SYS_INT_N 1U |
| 103 |
#define GPIOC_PIN2 2U |
| 104 |
#define GPIOC_PATH_DCSTAT 3U |
| 105 |
#define GPIOC_PIN4 4U |
| 106 |
#define GPIOC_PATH_DCEN 5U |
| 107 |
#define GPIOC_DRIVE_ENC2B 6U |
| 108 |
#define GPIOC_DRIVE_ENC2A 7U |
| 109 |
#define GPIOC_SYS_PD_N 8U |
| 110 |
#define GPIOC_SYS_REG_EN 9U |
| 111 |
#define GPIOC_SYS_UART_RX 10U |
| 112 |
#define GPIOC_SYS_UART_TX 11U |
| 113 |
#define GPIOC_PIN12 12U |
| 114 |
#define GPIOC_ACCEL_SS_N 13U |
| 115 |
#define GPIOC_GYRO_SS_N 14U |
| 116 |
#define GPIOC_PIN15 15U |
| 117 |
|
| 118 |
#define GPIOD_OSC_IN 0U |
| 119 |
#define GPIOD_OSC_OUT 1U |
| 120 |
#define GPIOD_SYS_WARMRST_N 2U |
| 121 |
#define GPIOD_PIN3 3U |
| 122 |
#define GPIOD_PIN4 4U |
| 123 |
#define GPIOD_PIN5 5U |
| 124 |
#define GPIOD_PIN6 6U |
| 125 |
#define GPIOD_PIN7 7U |
| 126 |
#define GPIOD_PIN8 8U |
| 127 |
#define GPIOD_PIN9 9U |
| 128 |
#define GPIOD_PIN10 10U |
| 129 |
#define GPIOD_PIN11 11U |
| 130 |
#define GPIOD_PIN12 12U |
| 131 |
#define GPIOD_PIN13 13U |
| 132 |
#define GPIOD_PIN14 14U |
| 133 |
#define GPIOD_PIN15 15U |
| 134 |
|
| 135 |
#define GPIOE_PIN0 0U |
| 136 |
#define GPIOE_PIN1 1U |
| 137 |
#define GPIOE_PIN2 2U |
| 138 |
#define GPIOE_PIN3 3U |
| 139 |
#define GPIOE_PIN4 4U |
| 140 |
#define GPIOE_PIN5 5U |
| 141 |
#define GPIOE_PIN6 6U |
| 142 |
#define GPIOE_PIN7 7U |
| 143 |
#define GPIOE_PIN8 8U |
| 144 |
#define GPIOE_PIN9 9U |
| 145 |
#define GPIOE_PIN10 10U |
| 146 |
#define GPIOE_PIN11 11U |
| 147 |
#define GPIOE_PIN12 12U |
| 148 |
#define GPIOE_PIN13 13U |
| 149 |
#define GPIOE_PIN14 14U |
| 150 |
#define GPIOE_PIN15 15U |
| 151 |
|
| 152 |
#define GPIOF_PIN0 0U |
| 153 |
#define GPIOF_PIN1 1U |
| 154 |
#define GPIOF_PIN2 2U |
| 155 |
#define GPIOF_PIN3 3U |
| 156 |
#define GPIOF_PIN4 4U |
| 157 |
#define GPIOF_PIN5 5U |
| 158 |
#define GPIOF_PIN6 6U |
| 159 |
#define GPIOF_PIN7 7U |
| 160 |
#define GPIOF_PIN8 8U |
| 161 |
#define GPIOF_PIN9 9U |
| 162 |
#define GPIOF_PIN10 10U |
| 163 |
#define GPIOF_PIN11 11U |
| 164 |
#define GPIOF_PIN12 12U |
| 165 |
#define GPIOF_PIN13 13U |
| 166 |
#define GPIOF_PIN14 14U |
| 167 |
#define GPIOF_PIN15 15U |
| 168 |
|
| 169 |
#define GPIOG_PIN0 0U |
| 170 |
#define GPIOG_PIN1 1U |
| 171 |
#define GPIOG_PIN2 2U |
| 172 |
#define GPIOG_PIN3 3U |
| 173 |
#define GPIOG_PIN4 4U |
| 174 |
#define GPIOG_PIN5 5U |
| 175 |
#define GPIOG_PIN6 6U |
| 176 |
#define GPIOG_PIN7 7U |
| 177 |
#define GPIOG_PIN8 8U |
| 178 |
#define GPIOG_PIN9 9U |
| 179 |
#define GPIOG_PIN10 10U |
| 180 |
#define GPIOG_PIN11 11U |
| 181 |
#define GPIOG_PIN12 12U |
| 182 |
#define GPIOG_PIN13 13U |
| 183 |
#define GPIOG_PIN14 14U |
| 184 |
#define GPIOG_PIN15 15U |
| 185 |
|
| 186 |
/*
|
| 187 |
* IO lines assignments.
|
| 188 |
*/
|
| 189 |
#define LINE_WKUP PAL_LINE(GPIOA, GPIOA_WKUP)
|
| 190 |
#define LINE_LED PAL_LINE(GPIOA, GPIOA_LED)
|
| 191 |
#define LINE_DRIVE_PWM1A PAL_LINE(GPIOA, GPIOA_DRIVE_PWM1A)
|
| 192 |
#define LINE_DRIVE_PWM1B PAL_LINE(GPIOA, GPIOA_DRIVE_PWM1B)
|
| 193 |
#define LINE_MOTION_SCLK PAL_LINE(GPIOA, GPIOA_MOTION_SCLK)
|
| 194 |
#define LINE_MOTION_MISO PAL_LINE(GPIOA, GPIOA_MOTION_MISO)
|
| 195 |
#define LINE_MOTION_MOSI PAL_LINE(GPIOA, GPIOA_MOTION_MOSI)
|
| 196 |
#define LINE_PROG_RX PAL_LINE(GPIOA, GPIOA_PROG_RX)
|
| 197 |
#define LINE_PROG_TX PAL_LINE(GPIOA, GPIOA_PROG_TX)
|
| 198 |
#define LINE_CAN_RX PAL_LINE(GPIOA, GPIOA_CAN_RX)
|
| 199 |
#define LINE_CAN_TX PAL_LINE(GPIOA, GPIOA_CAN_TX)
|
| 200 |
#define LINE_SWDIO PAL_LINE(GPIOA, GPIOA_SWDIO)
|
| 201 |
#define LINE_SWCLK PAL_LINE(GPIOA, GPIOA_SWCLK)
|
| 202 |
#define LINE_DRIVE_PWM2B PAL_LINE(GPIOA, GPIOA_DRIVE_PWM2B)
|
| 203 |
|
| 204 |
#define LINE_DRIVE_SENSE2 PAL_LINE(GPIOB, GPIOB_DRIVE_SENSE2)
|
| 205 |
#define LINE_POWER_EN PAL_LINE(GPIOB, GPIOB_POWER_EN)
|
| 206 |
#define LINE_DRIVE_PWM2A PAL_LINE(GPIOB, GPIOB_DRIVE_PWM2A)
|
| 207 |
#define LINE_COMPASS_DRDY PAL_LINE(GPIOB, GPIOB_COMPASS_DRDY)
|
| 208 |
#define LINE_DRIVE_ENC1A PAL_LINE(GPIOB, GPIOB_DRIVE_ENC1A)
|
| 209 |
#define LINE_DRIVE_ENC1B PAL_LINE(GPIOB, GPIOB_DRIVE_ENC1B)
|
| 210 |
#define LINE_COMPASS_SCL PAL_LINE(GPIOB, GPIOB_COMPASS_SCL)
|
| 211 |
#define LINE_COMPASS_SDA PAL_LINE(GPIOB, GPIOB_COMPASS_SDA)
|
| 212 |
#define LINE_IR_SCL PAL_LINE(GPIOB, GPIOB_IR_SCL)
|
| 213 |
#define LINE_IR_SDA PAL_LINE(GPIOB, GPIOB_IR_SDA)
|
| 214 |
#define LINE_IR_INT PAL_LINE(GPIOB, GPIOB_IR_INT)
|
| 215 |
#define LINE_GYRO_DRDY PAL_LINE(GPIOB, GPIOB_GYRO_DRDY)
|
| 216 |
#define LINE_SYS_UART_UP PAL_LINE(GPIOB, GPIOB_SYS_UART_UP)
|
| 217 |
#define LINE_ACCEL_INT_N PAL_LINE(GPIOB, GPIOB_ACCEL_INT_N)
|
| 218 |
|
| 219 |
#define LINE_DRIVE_SENSE1 PAL_LINE(GPIOC, GPIOC_DRIVE_SENSE1)
|
| 220 |
#define LINE_SYS_INT_N PAL_LINE(GPIOC, GPIOC_SYS_INT_N)
|
| 221 |
#define LINE_PATH_DCSTAT PAL_LINE(GPIOC, GPIOC_PATH_DCSTAT)
|
| 222 |
#define LINE_PATH_DCEN PAL_LINE(GPIOC, GPIOC_PATH_DCEN)
|
| 223 |
#define LINE_DRIVE_ENC2B PAL_LINE(GPIOC, GPIOC_DRIVE_ENC2B)
|
| 224 |
#define LINE_DRIVE_ENC2A PAL_LINE(GPIOC, GPIOC_DRIVE_ENC2A)
|
| 225 |
#define LINE_SYS_PD_N PAL_LINE(GPIOC, GPIOC_SYS_PD_N)
|
| 226 |
#define LINE_SYS_REG_EN PAL_LINE(GPIOC, GPIOC_SYS_REG_EN)
|
| 227 |
#define LINE_SYS_UART_RX PAL_LINE(GPIOC, GPIOC_SYS_UART_RX)
|
| 228 |
#define LINE_SYS_UART_TX PAL_LINE(GPIOC, GPIOC_SYS_UART_TX)
|
| 229 |
#define LINE_ACCEL_SS_N PAL_LINE(GPIOC, GPIOC_ACCEL_SS_N)
|
| 230 |
#define LINE_GYRO_SS_N PAL_LINE(GPIOC, GPIOC_GYRO_SS_N)
|
| 231 |
|
| 232 |
#define LINE_OSC_IN PAL_LINE(GPIOD, GPIOD_OSC_IN)
|
| 233 |
#define LINE_OSC_OUT PAL_LINE(GPIOD, GPIOD_OSC_OUT)
|
| 234 |
#define LINE_SYS_WARMRST_N PAL_LINE(GPIOD, GPIOD_SYS_WARMRST_N)
|
| 235 |
|
| 236 |
/*
|
| 237 |
* I/O ports initial setup, this configuration is established soon after reset
|
| 238 |
* in the initialization code.
|
| 239 |
* Please refer to the STM32 Reference Manual for details.
|
| 240 |
*/
|
| 241 |
#define PIN_MODE_INPUT 0U |
| 242 |
#define PIN_MODE_OUTPUT_2M 2U |
| 243 |
#define PIN_MODE_OUTPUT_10M 1U |
| 244 |
#define PIN_MODE_OUTPUT_50M 3U |
| 245 |
#define PIN_CNF_INPUT_ANALOG 0U |
| 246 |
#define PIN_CNF_INPUT_FLOATING 1U |
| 247 |
#define PIN_CNF_INPUT_PULLX 2U |
| 248 |
#define PIN_CNF_OUTPUT_PUSHPULL 0U |
| 249 |
#define PIN_CNF_OUTPUT_OPENDRAIN 1U |
| 250 |
#define PIN_CNF_ALTERNATE_PUSHPULL 2U |
| 251 |
#define PIN_CNF_ALTERNATE_OPENDRAIN 3U |
| 252 |
#define PIN_CR(pin, mode, cnf) (((mode) | ((cnf) << 2U)) << (((pin) % 8U) * 4U)) |
| 253 |
#define PIN_ODR_LOW(n) (0U << (n)) |
| 254 |
#define PIN_ODR_HIGH(n) (1U << (n)) |
| 255 |
#define PIN_IGNORE(n) (1U << (n)) |
| 256 |
|
| 257 |
/*
|
| 258 |
* GPIOA setup:
|
| 259 |
*
|
| 260 |
* PA0 - WKUP (input floating)
|
| 261 |
* PA1 - LED (output opendrain high 50MHz)
|
| 262 |
* PA2 - DRIVE_PWM1A (alternate pushpull 50MHz)
|
| 263 |
* PA3 - DRIVE_PWM1B (alternate pushpull 50MHz)
|
| 264 |
* PA4 - PIN4 (input floating)
|
| 265 |
* PA5 - MOTION_SCLK (alternate pushpull 50MHz)
|
| 266 |
* PA6 - MOTION_MISO (input pullup)
|
| 267 |
* PA7 - MOTION_MOSI (alternate pushpull 50MHz)
|
| 268 |
* PA8 - PIN8 (input floating)
|
| 269 |
* PA9 - PROG_RX (alternate pushpull 50MHz)
|
| 270 |
* PA10 - PROG_TX (input pullup)
|
| 271 |
* PA11 - CAN_RX (input pullup)
|
| 272 |
* PA12 - CAN_TX (alternate pushpull 50MHz)
|
| 273 |
* PA13 - SWDIO (input pullup)
|
| 274 |
* PA14 - SWCLK (input pullup)
|
| 275 |
* PA15 - DRIVE_PWM2B (alternate pushpull 50MHz)
|
| 276 |
*/
|
| 277 |
#define VAL_GPIOAIGN (PIN_IGNORE(GPIOA_LED)) & 0 |
| 278 |
#define VAL_GPIOACRL (PIN_CR(GPIOA_WKUP, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 279 |
PIN_CR(GPIOA_LED, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_OPENDRAIN) | \ |
| 280 |
PIN_CR(GPIOA_DRIVE_PWM1A, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_PUSHPULL) | \ |
| 281 |
PIN_CR(GPIOA_DRIVE_PWM1B, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_PUSHPULL) | \ |
| 282 |
PIN_CR(GPIOA_PIN4, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 283 |
PIN_CR(GPIOA_MOTION_SCLK, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_PUSHPULL) | \ |
| 284 |
PIN_CR(GPIOA_MOTION_MISO, PIN_MODE_INPUT, PIN_CNF_INPUT_PULLX) | \ |
| 285 |
PIN_CR(GPIOA_MOTION_MOSI, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_PUSHPULL)) |
| 286 |
#define VAL_GPIOACRH (PIN_CR(GPIOA_PIN8, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 287 |
PIN_CR(GPIOA_PROG_RX, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_PUSHPULL) | \ |
| 288 |
PIN_CR(GPIOA_PROG_TX, PIN_MODE_INPUT, PIN_CNF_INPUT_PULLX) | \ |
| 289 |
PIN_CR(GPIOA_CAN_RX, PIN_MODE_INPUT, PIN_CNF_INPUT_PULLX) | \ |
| 290 |
PIN_CR(GPIOA_CAN_TX, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_PUSHPULL) | \ |
| 291 |
PIN_CR(GPIOA_SWDIO, PIN_MODE_INPUT, PIN_CNF_INPUT_PULLX) | \ |
| 292 |
PIN_CR(GPIOA_SWCLK, PIN_MODE_INPUT, PIN_CNF_INPUT_PULLX) | \ |
| 293 |
PIN_CR(GPIOA_DRIVE_PWM2B, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_PUSHPULL)) |
| 294 |
#define VAL_GPIOAODR (PIN_ODR_HIGH(GPIOA_WKUP) | \
|
| 295 |
PIN_ODR_HIGH(GPIOA_LED) | \ |
| 296 |
PIN_ODR_HIGH(GPIOA_DRIVE_PWM1A) | \ |
| 297 |
PIN_ODR_HIGH(GPIOA_DRIVE_PWM1B) | \ |
| 298 |
PIN_ODR_LOW(GPIOA_PIN4) | \ |
| 299 |
PIN_ODR_HIGH(GPIOA_MOTION_SCLK) | \ |
| 300 |
PIN_ODR_HIGH(GPIOA_MOTION_MISO) | \ |
| 301 |
PIN_ODR_HIGH(GPIOA_MOTION_MOSI) | \ |
| 302 |
PIN_ODR_LOW(GPIOA_PIN8) | \ |
| 303 |
PIN_ODR_HIGH(GPIOA_PROG_RX) | \ |
| 304 |
PIN_ODR_HIGH(GPIOA_PROG_TX) | \ |
| 305 |
PIN_ODR_HIGH(GPIOA_CAN_RX) | \ |
| 306 |
PIN_ODR_HIGH(GPIOA_CAN_TX) | \ |
| 307 |
PIN_ODR_HIGH(GPIOA_SWDIO) | \ |
| 308 |
PIN_ODR_HIGH(GPIOA_SWCLK) | \ |
| 309 |
PIN_ODR_HIGH(GPIOA_DRIVE_PWM2B)) |
| 310 |
|
| 311 |
/*
|
| 312 |
* GPIOB setup:
|
| 313 |
*
|
| 314 |
* PB0 - PIN0 (input floating)
|
| 315 |
* PB1 - DRIVE_SENSE2 (input analog)
|
| 316 |
* PB2 - POWER_EN (output pushpull low 50MHz)
|
| 317 |
* PB3 - DRIVE_PWM2A (alternate pushpull 50MHz)
|
| 318 |
* PB4 - PIN4 (input floating)
|
| 319 |
* PB5 - COMPASS_DRDY (input pullup)
|
| 320 |
* PB6 - DRIVE_ENC1A (input floating)
|
| 321 |
* PB7 - DRIVE_ENC1B (input floating)
|
| 322 |
* PB8 - COMPASS_SCL (alternate opendrain 50MHz)
|
| 323 |
* PB9 - COMPASS_SDA (alternate opendrain 50MHz)
|
| 324 |
* PB10 - IR_SCL (alternate opendrain 50MHz)
|
| 325 |
* PB11 - IR_SDA (alternate opendrain 50MHz)
|
| 326 |
* PB12 - IR_INT (input pullup)
|
| 327 |
* PB13 - GYRO_DRDY (input pullup)
|
| 328 |
* PB14 - SYS_UART_UP (output opendrain high 50MHz)
|
| 329 |
* PB15 - ACCEL_INT_N (input pullup)
|
| 330 |
*/
|
| 331 |
#define VAL_GPIOBIGN (PIN_IGNORE(GPIOB_SYS_UART_UP)) & 0 |
| 332 |
#define VAL_GPIOBCRL (PIN_CR(GPIOB_PIN0, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 333 |
PIN_CR(GPIOB_DRIVE_SENSE2, PIN_MODE_INPUT, PIN_CNF_INPUT_ANALOG) | \ |
| 334 |
PIN_CR(GPIOB_POWER_EN, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_PUSHPULL) | \ |
| 335 |
PIN_CR(GPIOB_DRIVE_PWM2A, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_PUSHPULL) | \ |
| 336 |
PIN_CR(GPIOB_PIN4, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 337 |
PIN_CR(GPIOB_COMPASS_DRDY, PIN_MODE_INPUT, PIN_CNF_INPUT_PULLX) | \ |
| 338 |
PIN_CR(GPIOB_DRIVE_ENC1A, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 339 |
PIN_CR(GPIOB_DRIVE_ENC1B, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 340 |
#define VAL_GPIOBCRH (PIN_CR(GPIOB_COMPASS_SCL, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_OPENDRAIN) | \
|
| 341 |
PIN_CR(GPIOB_COMPASS_SDA, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_OPENDRAIN) | \ |
| 342 |
PIN_CR(GPIOB_IR_SCL, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_OPENDRAIN) | \ |
| 343 |
PIN_CR(GPIOB_IR_SDA, PIN_MODE_OUTPUT_50M, PIN_CNF_ALTERNATE_OPENDRAIN) | \ |
| 344 |
PIN_CR(GPIOB_IR_INT, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 345 |
PIN_CR(GPIOB_GYRO_DRDY, PIN_MODE_INPUT, PIN_CNF_INPUT_PULLX) | \ |
| 346 |
PIN_CR(GPIOB_SYS_UART_UP, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_OPENDRAIN) | \ |
| 347 |
PIN_CR(GPIOB_ACCEL_INT_N, PIN_MODE_INPUT, PIN_CNF_INPUT_PULLX)) |
| 348 |
#define VAL_GPIOBODR (PIN_ODR_LOW(GPIOB_PIN0) | \
|
| 349 |
PIN_ODR_HIGH(GPIOB_DRIVE_SENSE2) | \ |
| 350 |
PIN_ODR_LOW(GPIOB_POWER_EN) | \ |
| 351 |
PIN_ODR_HIGH(GPIOB_DRIVE_PWM2A) | \ |
| 352 |
PIN_ODR_LOW(GPIOB_PIN4) | \ |
| 353 |
PIN_ODR_HIGH(GPIOB_COMPASS_DRDY) | \ |
| 354 |
PIN_ODR_HIGH(GPIOB_DRIVE_ENC1A) | \ |
| 355 |
PIN_ODR_HIGH(GPIOB_DRIVE_ENC1B) | \ |
| 356 |
PIN_ODR_HIGH(GPIOB_COMPASS_SCL) | \ |
| 357 |
PIN_ODR_HIGH(GPIOB_COMPASS_SDA) | \ |
| 358 |
PIN_ODR_HIGH(GPIOB_IR_SCL) | \ |
| 359 |
PIN_ODR_HIGH(GPIOB_IR_SDA) | \ |
| 360 |
PIN_ODR_HIGH(GPIOB_IR_INT) | \ |
| 361 |
PIN_ODR_HIGH(GPIOB_GYRO_DRDY) | \ |
| 362 |
PIN_ODR_HIGH(GPIOB_SYS_UART_UP) | \ |
| 363 |
PIN_ODR_HIGH(GPIOB_ACCEL_INT_N)) |
| 364 |
|
| 365 |
/*
|
| 366 |
* GPIOC setup:
|
| 367 |
*
|
| 368 |
* PC0 - DRIVE_SENSE1 (input analog)
|
| 369 |
* PC1 - SYS_INT_N (output opendrain low 50MHz)
|
| 370 |
* PC2 - PIN2 (input floating)
|
| 371 |
* PC3 - PATH_DCSTAT (input floating)
|
| 372 |
* PC4 - PIN4 (input floating)
|
| 373 |
* PC5 - PATH_DCEN (output pushpull low 50MHz)
|
| 374 |
* PC6 - DRIVE_ENC2B (input floating)
|
| 375 |
* PC7 - DRIVE_ENC2A (input floating)
|
| 376 |
* PC8 - SYS_PD_N (output opendrain high 50MHz)
|
| 377 |
* PC9 - SYS_REG_EN (input floating)
|
| 378 |
* PC10 - SYS_UART_RX (input floating)
|
| 379 |
* PC11 - SYS_UART_TX (input floating)
|
| 380 |
* PC12 - PIN12 (input pullup)
|
| 381 |
* PC13 - ACCEL_SS_N (output pushpull high 50MHz)
|
| 382 |
* PC14 - GYRO_SS_N (output pushpull high 50MHz)
|
| 383 |
* PC15 - PIN15 (input floating)
|
| 384 |
*/
|
| 385 |
#define VAL_GPIOCIGN (PIN_IGNORE(GPIOC_SYS_INT_N) | \
|
| 386 |
PIN_IGNORE(GPIOC_SYS_PD_N)) & 0
|
| 387 |
#define VAL_GPIOCCRL (PIN_CR(GPIOC_DRIVE_SENSE1, PIN_MODE_INPUT, PIN_CNF_INPUT_ANALOG) | \
|
| 388 |
PIN_CR(GPIOC_SYS_INT_N, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_OPENDRAIN) | \ |
| 389 |
PIN_CR(GPIOC_PIN2, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 390 |
PIN_CR(GPIOC_PATH_DCSTAT, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 391 |
PIN_CR(GPIOC_PIN4, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 392 |
PIN_CR(GPIOC_PATH_DCEN, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_PUSHPULL) | \ |
| 393 |
PIN_CR(GPIOC_DRIVE_ENC2B, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 394 |
PIN_CR(GPIOC_DRIVE_ENC2A, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 395 |
#define VAL_GPIOCCRH (PIN_CR(GPIOC_SYS_PD_N, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_OPENDRAIN) | \
|
| 396 |
PIN_CR(GPIOC_SYS_REG_EN, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 397 |
PIN_CR(GPIOC_SYS_UART_RX, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 398 |
PIN_CR(GPIOC_SYS_UART_TX, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 399 |
PIN_CR(GPIOC_PIN12, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 400 |
PIN_CR(GPIOC_ACCEL_SS_N, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_PUSHPULL) | \ |
| 401 |
PIN_CR(GPIOC_GYRO_SS_N, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_PUSHPULL) | \ |
| 402 |
PIN_CR(GPIOC_PIN15, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 403 |
#define VAL_GPIOCODR (PIN_ODR_HIGH(GPIOC_DRIVE_SENSE1) | \
|
| 404 |
PIN_ODR_LOW(GPIOC_SYS_INT_N) | \ |
| 405 |
PIN_ODR_LOW(GPIOC_PIN2) | \ |
| 406 |
PIN_ODR_HIGH(GPIOC_PATH_DCSTAT) | \ |
| 407 |
PIN_ODR_LOW(GPIOC_PIN4) | \ |
| 408 |
PIN_ODR_LOW(GPIOC_PATH_DCEN) | \ |
| 409 |
PIN_ODR_HIGH(GPIOC_DRIVE_ENC2B) | \ |
| 410 |
PIN_ODR_HIGH(GPIOC_DRIVE_ENC2A) | \ |
| 411 |
PIN_ODR_HIGH(GPIOC_SYS_PD_N) | \ |
| 412 |
PIN_ODR_HIGH(GPIOC_SYS_REG_EN) | \ |
| 413 |
PIN_ODR_HIGH(GPIOC_SYS_UART_RX) | \ |
| 414 |
PIN_ODR_HIGH(GPIOC_SYS_UART_TX) | \ |
| 415 |
PIN_ODR_LOW(GPIOC_PIN12) | \ |
| 416 |
PIN_ODR_HIGH(GPIOC_ACCEL_SS_N) | \ |
| 417 |
PIN_ODR_HIGH(GPIOC_GYRO_SS_N) | \ |
| 418 |
PIN_ODR_LOW(GPIOC_PIN15)) |
| 419 |
|
| 420 |
/*
|
| 421 |
* GPIOD setup:
|
| 422 |
*
|
| 423 |
* PD0 - OSC_IN (input floating)
|
| 424 |
* PD1 - OSC_OUT (input floating)
|
| 425 |
* PD2 - SYS_WARMRST_N (output opendrain high 50MHz)
|
| 426 |
* PD3 - PIN3 (input floating)
|
| 427 |
* PD4 - PIN4 (input floating)
|
| 428 |
* PD5 - PIN5 (input floating)
|
| 429 |
* PD6 - PIN6 (input floating)
|
| 430 |
* PD7 - PIN7 (input floating)
|
| 431 |
* PD8 - PIN8 (input floating)
|
| 432 |
* PD9 - PIN9 (input floating)
|
| 433 |
* PD10 - PIN10 (input floating)
|
| 434 |
* PD11 - PIN11 (input floating)
|
| 435 |
* PD12 - PIN12 (input floating)
|
| 436 |
* PD13 - PIN13 (input floating)
|
| 437 |
* PD14 - PIN14 (input floating)
|
| 438 |
* PD15 - PIN15 (input floating)
|
| 439 |
*/
|
| 440 |
#define VAL_GPIODIGN 0 |
| 441 |
#define VAL_GPIODCRL (PIN_CR(GPIOD_OSC_IN, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 442 |
PIN_CR(GPIOD_OSC_OUT, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 443 |
PIN_CR(GPIOD_SYS_WARMRST_N, PIN_MODE_OUTPUT_50M, PIN_CNF_OUTPUT_OPENDRAIN) | \ |
| 444 |
PIN_CR(GPIOD_PIN3, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 445 |
PIN_CR(GPIOD_PIN4, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 446 |
PIN_CR(GPIOD_PIN5, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 447 |
PIN_CR(GPIOD_PIN6, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 448 |
PIN_CR(GPIOD_PIN7, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 449 |
#define VAL_GPIODCRH (PIN_CR(GPIOD_PIN8, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 450 |
PIN_CR(GPIOD_PIN9, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 451 |
PIN_CR(GPIOD_PIN10, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 452 |
PIN_CR(GPIOD_PIN11, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 453 |
PIN_CR(GPIOD_PIN12, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 454 |
PIN_CR(GPIOD_PIN13, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 455 |
PIN_CR(GPIOD_PIN14, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 456 |
PIN_CR(GPIOD_PIN15, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 457 |
#define VAL_GPIODODR (PIN_ODR_HIGH(GPIOD_OSC_IN) | \
|
| 458 |
PIN_ODR_HIGH(GPIOD_OSC_OUT) | \ |
| 459 |
PIN_ODR_HIGH(GPIOD_SYS_WARMRST_N) | \ |
| 460 |
PIN_ODR_LOW(GPIOD_PIN3) | \ |
| 461 |
PIN_ODR_LOW(GPIOD_PIN4) | \ |
| 462 |
PIN_ODR_LOW(GPIOD_PIN5) | \ |
| 463 |
PIN_ODR_LOW(GPIOD_PIN6) | \ |
| 464 |
PIN_ODR_LOW(GPIOD_PIN7) | \ |
| 465 |
PIN_ODR_LOW(GPIOD_PIN8) | \ |
| 466 |
PIN_ODR_LOW(GPIOD_PIN9) | \ |
| 467 |
PIN_ODR_LOW(GPIOD_PIN10) | \ |
| 468 |
PIN_ODR_LOW(GPIOD_PIN11) | \ |
| 469 |
PIN_ODR_LOW(GPIOD_PIN12) | \ |
| 470 |
PIN_ODR_LOW(GPIOD_PIN13) | \ |
| 471 |
PIN_ODR_LOW(GPIOD_PIN14) | \ |
| 472 |
PIN_ODR_LOW(GPIOD_PIN15)) |
| 473 |
|
| 474 |
/*
|
| 475 |
* GPIOE setup:
|
| 476 |
*
|
| 477 |
* PE0 - PIN0 (input floating)
|
| 478 |
* PE1 - PIN1 (input floating)
|
| 479 |
* PE2 - PIN2 (input floating)
|
| 480 |
* PE3 - PIN3 (input floating)
|
| 481 |
* PE4 - PIN4 (input floating)
|
| 482 |
* PE5 - PIN5 (input floating)
|
| 483 |
* PE6 - PIN6 (input floating)
|
| 484 |
* PE7 - PIN7 (input floating)
|
| 485 |
* PE8 - PIN8 (input floating)
|
| 486 |
* PE9 - PIN9 (input floating)
|
| 487 |
* PE10 - PIN10 (input floating)
|
| 488 |
* PE11 - PIN11 (input floating)
|
| 489 |
* PE12 - PIN12 (input floating)
|
| 490 |
* PE13 - PIN13 (input floating)
|
| 491 |
* PE14 - PIN14 (input floating)
|
| 492 |
* PE15 - PIN15 (input floating)
|
| 493 |
*/
|
| 494 |
#define VAL_GPIOEIGN 0 |
| 495 |
#define VAL_GPIOECRL (PIN_CR(GPIOE_PIN0, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 496 |
PIN_CR(GPIOE_PIN1, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 497 |
PIN_CR(GPIOE_PIN2, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 498 |
PIN_CR(GPIOE_PIN3, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 499 |
PIN_CR(GPIOE_PIN4, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 500 |
PIN_CR(GPIOE_PIN5, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 501 |
PIN_CR(GPIOE_PIN6, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 502 |
PIN_CR(GPIOE_PIN7, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 503 |
#define VAL_GPIOECRH (PIN_CR(GPIOE_PIN8, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 504 |
PIN_CR(GPIOE_PIN9, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 505 |
PIN_CR(GPIOE_PIN10, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 506 |
PIN_CR(GPIOE_PIN11, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 507 |
PIN_CR(GPIOE_PIN12, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 508 |
PIN_CR(GPIOE_PIN13, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 509 |
PIN_CR(GPIOE_PIN14, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 510 |
PIN_CR(GPIOE_PIN15, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 511 |
#define VAL_GPIOEODR (PIN_ODR_LOW(GPIOE_PIN0) | \
|
| 512 |
PIN_ODR_LOW(GPIOE_PIN1) | \ |
| 513 |
PIN_ODR_LOW(GPIOE_PIN2) | \ |
| 514 |
PIN_ODR_LOW(GPIOE_PIN3) | \ |
| 515 |
PIN_ODR_LOW(GPIOE_PIN4) | \ |
| 516 |
PIN_ODR_LOW(GPIOE_PIN5) | \ |
| 517 |
PIN_ODR_LOW(GPIOE_PIN6) | \ |
| 518 |
PIN_ODR_LOW(GPIOE_PIN7) | \ |
| 519 |
PIN_ODR_LOW(GPIOE_PIN8) | \ |
| 520 |
PIN_ODR_LOW(GPIOE_PIN9) | \ |
| 521 |
PIN_ODR_LOW(GPIOE_PIN10) | \ |
| 522 |
PIN_ODR_LOW(GPIOE_PIN11) | \ |
| 523 |
PIN_ODR_LOW(GPIOE_PIN12) | \ |
| 524 |
PIN_ODR_LOW(GPIOE_PIN13) | \ |
| 525 |
PIN_ODR_LOW(GPIOE_PIN14) | \ |
| 526 |
PIN_ODR_LOW(GPIOE_PIN15)) |
| 527 |
|
| 528 |
/*
|
| 529 |
* GPIOF setup:
|
| 530 |
*
|
| 531 |
* PF0 - PIN0 (input floating)
|
| 532 |
* PF1 - PIN1 (input floating)
|
| 533 |
* PF2 - PIN2 (input floating)
|
| 534 |
* PF3 - PIN3 (input floating)
|
| 535 |
* PF4 - PIN4 (input floating)
|
| 536 |
* PF5 - PIN5 (input floating)
|
| 537 |
* PF6 - PIN6 (input floating)
|
| 538 |
* PF7 - PIN7 (input floating)
|
| 539 |
* PF8 - PIN8 (input floating)
|
| 540 |
* PF9 - PIN9 (input floating)
|
| 541 |
* PF10 - PIN10 (input floating)
|
| 542 |
* PF11 - PIN11 (input floating)
|
| 543 |
* PF12 - PIN12 (input floating)
|
| 544 |
* PF13 - PIN13 (input floating)
|
| 545 |
* PF14 - PIN14 (input floating)
|
| 546 |
* PF15 - PIN15 (input floating)
|
| 547 |
*/
|
| 548 |
#define VAL_GPIOFIGN 0 |
| 549 |
#define VAL_GPIOFCRL (PIN_CR(GPIOF_PIN0, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 550 |
PIN_CR(GPIOF_PIN1, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 551 |
PIN_CR(GPIOF_PIN2, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 552 |
PIN_CR(GPIOF_PIN3, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 553 |
PIN_CR(GPIOF_PIN4, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 554 |
PIN_CR(GPIOF_PIN5, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 555 |
PIN_CR(GPIOF_PIN6, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 556 |
PIN_CR(GPIOF_PIN7, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 557 |
#define VAL_GPIOFCRH (PIN_CR(GPIOF_PIN8, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 558 |
PIN_CR(GPIOF_PIN9, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 559 |
PIN_CR(GPIOF_PIN10, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 560 |
PIN_CR(GPIOF_PIN11, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 561 |
PIN_CR(GPIOF_PIN12, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 562 |
PIN_CR(GPIOF_PIN13, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 563 |
PIN_CR(GPIOF_PIN14, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 564 |
PIN_CR(GPIOF_PIN15, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 565 |
#define VAL_GPIOFODR (PIN_ODR_LOW(GPIOF_PIN0) | \
|
| 566 |
PIN_ODR_LOW(GPIOF_PIN1) | \ |
| 567 |
PIN_ODR_LOW(GPIOF_PIN2) | \ |
| 568 |
PIN_ODR_LOW(GPIOF_PIN3) | \ |
| 569 |
PIN_ODR_LOW(GPIOF_PIN4) | \ |
| 570 |
PIN_ODR_LOW(GPIOF_PIN5) | \ |
| 571 |
PIN_ODR_LOW(GPIOF_PIN6) | \ |
| 572 |
PIN_ODR_LOW(GPIOF_PIN7) | \ |
| 573 |
PIN_ODR_LOW(GPIOF_PIN8) | \ |
| 574 |
PIN_ODR_LOW(GPIOF_PIN9) | \ |
| 575 |
PIN_ODR_LOW(GPIOF_PIN10) | \ |
| 576 |
PIN_ODR_LOW(GPIOF_PIN11) | \ |
| 577 |
PIN_ODR_LOW(GPIOF_PIN12) | \ |
| 578 |
PIN_ODR_LOW(GPIOF_PIN13) | \ |
| 579 |
PIN_ODR_LOW(GPIOF_PIN14) | \ |
| 580 |
PIN_ODR_LOW(GPIOF_PIN15)) |
| 581 |
|
| 582 |
/*
|
| 583 |
* GPIOG setup:
|
| 584 |
*
|
| 585 |
* PG0 - PIN0 (input floating)
|
| 586 |
* PG1 - PIN1 (input floating)
|
| 587 |
* PG2 - PIN2 (input floating)
|
| 588 |
* PG3 - PIN3 (input floating)
|
| 589 |
* PG4 - PIN4 (input floating)
|
| 590 |
* PG5 - PIN5 (input floating)
|
| 591 |
* PG6 - PIN6 (input floating)
|
| 592 |
* PG7 - PIN7 (input floating)
|
| 593 |
* PG8 - PIN8 (input floating)
|
| 594 |
* PG9 - PIN9 (input floating)
|
| 595 |
* PG10 - PIN10 (input floating)
|
| 596 |
* PG11 - PIN11 (input floating)
|
| 597 |
* PG12 - PIN12 (input floating)
|
| 598 |
* PG13 - PIN13 (input floating)
|
| 599 |
* PG14 - PIN14 (input floating)
|
| 600 |
* PG15 - PIN15 (input floating)
|
| 601 |
*/
|
| 602 |
#define VAL_GPIOGIGN 0 |
| 603 |
#define VAL_GPIOGCRL (PIN_CR(GPIOG_PIN0, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 604 |
PIN_CR(GPIOG_PIN1, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 605 |
PIN_CR(GPIOG_PIN2, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 606 |
PIN_CR(GPIOG_PIN3, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 607 |
PIN_CR(GPIOG_PIN4, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 608 |
PIN_CR(GPIOG_PIN5, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 609 |
PIN_CR(GPIOG_PIN6, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 610 |
PIN_CR(GPIOG_PIN7, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 611 |
#define VAL_GPIOGCRH (PIN_CR(GPIOG_PIN8, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \
|
| 612 |
PIN_CR(GPIOG_PIN9, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 613 |
PIN_CR(GPIOG_PIN10, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 614 |
PIN_CR(GPIOG_PIN11, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 615 |
PIN_CR(GPIOG_PIN12, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 616 |
PIN_CR(GPIOG_PIN13, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 617 |
PIN_CR(GPIOG_PIN14, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING) | \ |
| 618 |
PIN_CR(GPIOG_PIN15, PIN_MODE_INPUT, PIN_CNF_INPUT_FLOATING)) |
| 619 |
#define VAL_GPIOGODR (PIN_ODR_LOW(GPIOG_PIN0) | \
|
| 620 |
PIN_ODR_LOW(GPIOG_PIN1) | \ |
| 621 |
PIN_ODR_LOW(GPIOG_PIN2) | \ |
| 622 |
PIN_ODR_LOW(GPIOG_PIN3) | \ |
| 623 |
PIN_ODR_LOW(GPIOG_PIN4) | \ |
| 624 |
PIN_ODR_LOW(GPIOG_PIN5) | \ |
| 625 |
PIN_ODR_LOW(GPIOG_PIN6) | \ |
| 626 |
PIN_ODR_LOW(GPIOG_PIN7) | \ |
| 627 |
PIN_ODR_LOW(GPIOG_PIN8) | \ |
| 628 |
PIN_ODR_LOW(GPIOG_PIN9) | \ |
| 629 |
PIN_ODR_LOW(GPIOG_PIN10) | \ |
| 630 |
PIN_ODR_LOW(GPIOG_PIN11) | \ |
| 631 |
PIN_ODR_LOW(GPIOG_PIN12) | \ |
| 632 |
PIN_ODR_LOW(GPIOG_PIN13) | \ |
| 633 |
PIN_ODR_LOW(GPIOG_PIN14) | \ |
| 634 |
PIN_ODR_LOW(GPIOG_PIN15)) |
| 635 |
|
| 636 |
#if !defined(_FROM_ASM_)
|
| 637 |
#ifdef __cplusplus
|
| 638 |
extern "C" { |
| 639 |
#endif
|
| 640 |
void boardInit(void); |
| 641 |
#ifdef __cplusplus
|
| 642 |
} |
| 643 |
#endif
|
| 644 |
#endif /* _FROM_ASM_ */ |
| 645 |
|
| 646 |
#endif /* _BOARD_H_ */ |
| 647 |
|
| 648 |
/** @} */
|