AMiRo-OS

# Doxyfile 1.8.11

# This file describes the settings to be used by the documentation system

# doxygen (www.doxygen.org) for a project.

#

# All text after a double hash (##) is considered a comment and is placed in

# front of the TAG it is preceding.

#

# All text after a single hash (#) is considered a comment and will be ignored.

# The format is:

# TAG = value [value, ...]

# For lists, items can also be appended using:

# TAG += value [value, ...]

# Values that contain spaces should be placed between quotes (\" \").

#---------------------------------------------------------------------------

# Project related configuration options

#---------------------------------------------------------------------------

# This tag specifies the encoding used for all characters in the config file

# that follow. The default is UTF-8 which is also the encoding used for all text

# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv

# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv

# for the list of possible encodings.

# The default value is: UTF-8.

DOXYFILE_ENCODING      = UTF-8

# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by

# double-quotes, unless you are using Doxywizard) that should identify the

# project for which the documentation is generated. This name is used in the

# title of most generated pages and in a few other places.

# The default value is: My Project.

PROJECT_NAME           = AMiRo-OS

# The PROJECT_NUMBER tag can be used to enter a project or revision number. This

# could be handy for archiving the generated documentation or if some version

# control system is used.

PROJECT_NUMBER         = 

# Using the PROJECT_BRIEF tag one can provide an optional one line description

# for a project that appears at the top of each page and should give viewer a

# quick idea about the purpose of the project. Keep the description short.

PROJECT_BRIEF          = 

# With the PROJECT_LOGO tag one can specify a logo or an icon that is included

# in the documentation. The maximum height of the logo should not exceed 55

# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy

# the logo to the output directory.

PROJECT_LOGO           = 

# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path

# into which the generated documentation will be written. If a relative path is

# entered, it will be relative to the location where doxygen was started. If

# left blank the current directory will be used.

OUTPUT_DIRECTORY       = 

# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-

# directories (in 2 levels) under the output directory of each output format and

# will distribute the generated files over these directories. Enabling this

# option can be useful when feeding doxygen a huge amount of source files, where

# putting all generated files in the same directory would otherwise causes

# performance problems for the file system.

# The default value is: NO.

CREATE_SUBDIRS         = NO

# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII

# characters to appear in the names of generated files. If set to NO, non-ASCII

# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode

# U+3044.

# The default value is: NO.

ALLOW_UNICODE_NAMES    = NO

# The OUTPUT_LANGUAGE tag is used to specify the language in which all

# documentation generated by doxygen is written. Doxygen will use this

# information to generate all constant output in the proper language.

# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,

# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),

# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,

# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),

# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,

# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,

# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,

# Ukrainian and Vietnamese.

# The default value is: English.

OUTPUT_LANGUAGE        = English

# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member

# descriptions after the members that are listed in the file and class

# documentation (similar to Javadoc). Set to NO to disable this.

# The default value is: YES.

BRIEF_MEMBER_DESC      = YES

# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief

# description of a member or function before the detailed description

#

# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

# brief descriptions will be completely suppressed.

# The default value is: YES.

REPEAT_BRIEF           = YES

# This tag implements a quasi-intelligent brief description abbreviator that is

# used to form the text in various listings. Each string in this list, if found

# as the leading text of the brief description, will be stripped from the text

# and the result, after processing the whole list, is used as the annotated

# text. Otherwise, the brief description is used as-is. If left blank, the

# following values are used ($name is automatically replaced with the name of

# the entity):The $name class, The $name widget, The $name file, is, provides,

# specifies, contains, represents, a, an and the.

ABBREVIATE_BRIEF       = "The $name class" \

                         "The $name widget" \

                         "The $name file" \

                         is \

                         provides \

                         specifies \

                         contains \

                         represents \

                         a \

                         an \

                         the

# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

# doxygen will generate a detailed section even if there is only a brief

# description.

# The default value is: NO.

ALWAYS_DETAILED_SEC    = NO

# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

# inherited members of a class in the documentation of that class as if those

# members were ordinary class members. Constructors, destructors and assignment

# operators of the base classes will not be shown.

# The default value is: NO.

INLINE_INHERITED_MEMB  = NO

# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path

# before files name in the file list and in the header files. If set to NO the

# shortest path that makes the file name unique will be used

# The default value is: YES.

FULL_PATH_NAMES        = YES

# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.

# Stripping is only done if one of the specified strings matches the left-hand

# part of the path. The tag can be used to show relative paths in the file list.

# If left blank the directory from which doxygen is run is used as the path to

# strip.

#

# Note that you can specify absolute paths here, but also relative paths, which

# will be relative from the directory where doxygen is started.

# This tag requires that the tag FULL_PATH_NAMES is set to YES.

STRIP_FROM_PATH        = 

# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the

# path mentioned in the documentation of a class, which tells the reader which

# header file to include in order to use a class. If left blank only the name of

# the header file containing the class definition is used. Otherwise one should

# specify the list of include paths that are normally passed to the compiler

# using the -I flag.

STRIP_FROM_INC_PATH    = 

# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but

# less readable) file names. This can be useful is your file systems doesn't

# support long names like on DOS, Mac, or CD-ROM.

# The default value is: NO.

SHORT_NAMES            = NO

# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the

# first line (until the first dot) of a Javadoc-style comment as the brief

# description. If set to NO, the Javadoc-style will behave just like regular Qt-

# style comments (thus requiring an explicit @brief command for a brief

# description.)

# The default value is: NO.

JAVADOC_AUTOBRIEF      = NO

# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first

# line (until the first dot) of a Qt-style comment as the brief description. If

# set to NO, the Qt-style will behave just like regular Qt-style comments (thus

# requiring an explicit \brief command for a brief description.)

# The default value is: NO.

QT_AUTOBRIEF           = NO

# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a

# multi-line C++ special comment block (i.e. a block of //! or /// comments) as

# a brief description. This used to be the default behavior. The new default is

# to treat a multi-line C++ comment block as a detailed description. Set this

# tag to YES if you prefer the old behavior instead.

#

# Note that setting this tag to YES also means that rational rose comments are

# not recognized any more.

# The default value is: NO.

MULTILINE_CPP_IS_BRIEF = NO

# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the

# documentation from any documented member that it re-implements.

# The default value is: YES.

INHERIT_DOCS           = YES

# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new

# page for each member. If set to NO, the documentation of a member will be part

# of the file/class/namespace that contains it.

# The default value is: NO.

SEPARATE_MEMBER_PAGES  = NO

# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen

# uses this value to replace tabs by spaces in code fragments.

# Minimum value: 1, maximum value: 16, default value: 4.

TAB_SIZE               = 4

# This tag can be used to specify a number of aliases that act as commands in

# the documentation. An alias has the form:

# name=value

# For example adding

# "sideeffect=@par Side Effects:\n"

# will allow you to put the command \sideeffect (or @sideeffect) in the

# documentation, which will result in a user-defined paragraph with heading

# "Side Effects:". You can put \n's in the value part of an alias to insert

# newlines.

ALIASES                = 

# This tag can be used to specify a number of word-keyword mappings (TCL only).

# A mapping has the form "name=value". For example adding "class=itcl::class"

# will allow you to use the command class in the itcl::class meaning.

TCL_SUBST              = 

# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources

# only. Doxygen will then generate output that is more tailored for C. For

# instance, some of the names that are used will be different. The list of all

# members will be omitted, etc.

# The default value is: NO.

OPTIMIZE_OUTPUT_FOR_C  = YES

# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or

# Python sources only. Doxygen will then generate output that is more tailored

# for that language. For instance, namespaces will be presented as packages,

# qualified scopes will look different, etc.

# The default value is: NO.

OPTIMIZE_OUTPUT_JAVA   = NO

# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

# sources. Doxygen will then generate output that is tailored for Fortran.

# The default value is: NO.

OPTIMIZE_FOR_FORTRAN   = NO

# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

# sources. Doxygen will then generate output that is tailored for VHDL.

# The default value is: NO.

OPTIMIZE_OUTPUT_VHDL   = NO

# Doxygen selects the parser to use depending on the extension of the files it

# parses. With this tag you can assign which parser to use for a given

# extension. Doxygen has a built-in mapping, but you can override or extend it

# using this tag. The format is ext=language, where ext is a file extension, and

# language is one of the parsers supported by doxygen: IDL, Java, Javascript,

# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:

# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:

# Fortran. In the later case the parser tries to guess whether the code is fixed

# or free formatted code, this is the default for Fortran type files), VHDL. For

# instance to make doxygen treat .inc files as Fortran files (default is PHP),

# and .f files as C (default is Fortran), use: inc=Fortran f=C.

#

# Note: For files without extension you can use no_extension as a placeholder.

#

# Note that for custom extensions you also need to set FILE_PATTERNS otherwise

# the files are not read by doxygen.

EXTENSION_MAPPING      = 

# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments

# according to the Markdown format, which allows for more readable

# documentation. See http://daringfireball.net/projects/markdown/ for details.

# The output of markdown processing is further processed by doxygen, so you can

# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in

# case of backward compatibilities issues.

# The default value is: YES.

MARKDOWN_SUPPORT       = YES

# When enabled doxygen tries to link words that correspond to documented

# classes, or namespaces to their corresponding documentation. Such a link can

# be prevented in individual cases by putting a % sign in front of the word or

# globally by setting AUTOLINK_SUPPORT to NO.

# The default value is: YES.

AUTOLINK_SUPPORT       = YES

# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

# to include (a tag file for) the STL sources as input, then you should set this

# tag to YES in order to let doxygen match functions declarations and

# definitions whose arguments contain STL classes (e.g. func(std::string);

# versus func(std::string) {}). This also make the inheritance and collaboration

# diagrams that involve STL classes more complete and accurate.

# The default value is: NO.

BUILTIN_STL_SUPPORT    = NO

# If you use Microsoft's C++/CLI language, you should set this option to YES to

# enable parsing support.

# The default value is: NO.

CPP_CLI_SUPPORT        = NO

# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:

# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen

# will parse them like normal C++ but will assume all classes use public instead

# of private inheritance when no explicit protection keyword is present.

# The default value is: NO.

SIP_SUPPORT            = NO

# For Microsoft's IDL there are propget and propput attributes to indicate

# getter and setter methods for a property. Setting this option to YES will make

# doxygen to replace the get and set methods by a property in the documentation.

# This will only work if the methods are indeed getting or setting a simple

# type. If this is not the case, or you want to show the methods anyway, you

# should set this option to NO.

# The default value is: YES.

IDL_PROPERTY_SUPPORT   = YES

# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

# tag is set to YES then doxygen will reuse the documentation of the first

# member in the group (if any) for the other members of the group. By default

# all members of a group must be documented explicitly.

# The default value is: NO.

DISTRIBUTE_GROUP_DOC   = NO

# If one adds a struct or class to a group and this option is enabled, then also

# any nested class or struct is added to the same group. By default this option

# is disabled and one has to add nested compounds explicitly via \ingroup.

# The default value is: NO.

GROUP_NESTED_COMPOUNDS = NO

# Set the SUBGROUPING tag to YES to allow class member groups of the same type

# (for instance a group of public functions) to be put as a subgroup of that

# type (e.g. under the Public Functions section). Set it to NO to prevent

# subgrouping. Alternatively, this can be done per class using the

# \nosubgrouping command.

# The default value is: YES.

SUBGROUPING            = YES

# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions

# are shown inside the group in which they are included (e.g. using \ingroup)

# instead of on a separate page (for HTML and Man pages) or section (for LaTeX

# and RTF).

#

# Note that this feature does not work in combination with

# SEPARATE_MEMBER_PAGES.

# The default value is: NO.

INLINE_GROUPED_CLASSES = NO

# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions

# with only public data fields or simple typedef fields will be shown inline in

# the documentation of the scope in which they are defined (i.e. file,

# namespace, or group documentation), provided this scope is documented. If set

# to NO, structs, classes, and unions are shown on a separate page (for HTML and

# Man pages) or section (for LaTeX and RTF).

# The default value is: NO.

INLINE_SIMPLE_STRUCTS  = NO

# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or

# enum is documented as struct, union, or enum with the name of the typedef. So

# typedef struct TypeS {} TypeT, will appear in the documentation as a struct

# with name TypeT. When disabled the typedef will appear as a member of a file,

# namespace, or class. And the struct will be named TypeS. This can typically be

# useful for C code in case the coding convention dictates that all compound

# types are typedef'ed and only the typedef is referenced, never the tag name.

# The default value is: NO.

TYPEDEF_HIDES_STRUCT   = NO

# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This

# cache is used to resolve symbols given their name and scope. Since this can be

# an expensive process and often the same symbol appears multiple times in the

# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small

# doxygen will become slower. If the cache is too large, memory is wasted. The

# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range

# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536

# symbols. At the end of a run doxygen will report the cache usage and suggest

# the optimal cache size from a speed point of view.

# Minimum value: 0, maximum value: 9, default value: 0.

LOOKUP_CACHE_SIZE      = 0

#---------------------------------------------------------------------------

# Build related configuration options

#---------------------------------------------------------------------------

# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in

# documentation are documented, even if no documentation was available. Private

# class members and static file members will be hidden unless the

# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.

# Note: This will also disable the warnings about undocumented members that are

# normally produced when WARNINGS is set to YES.

# The default value is: NO.

EXTRACT_ALL            = YES

# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will

# be included in the documentation.

# The default value is: NO.

EXTRACT_PRIVATE        = NO

# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal

# scope will be included in the documentation.

# The default value is: NO.

EXTRACT_PACKAGE        = NO

# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be

# included in the documentation.

# The default value is: NO.

EXTRACT_STATIC         = NO

# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined

# locally in source files will be included in the documentation. If set to NO,

# only classes defined in header files are included. Does not have any effect

# for Java sources.

# The default value is: YES.

EXTRACT_LOCAL_CLASSES  = YES

# This flag is only useful for Objective-C code. If set to YES, local methods,

# which are defined in the implementation section but not in the interface are

# included in the documentation. If set to NO, only methods in the interface are

# included.

# The default value is: NO.

EXTRACT_LOCAL_METHODS  = NO

# If this flag is set to YES, the members of anonymous namespaces will be

# extracted and appear in the documentation as a namespace called

# 'anonymous_namespace{file}', where file will be replaced with the base name of

# the file that contains the anonymous namespace. By default anonymous namespace

# are hidden.

# The default value is: NO.

EXTRACT_ANON_NSPACES   = NO

# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all

# undocumented members inside documented classes or files. If set to NO these

# members will be included in the various overviews, but no documentation

# section is generated. This option has no effect if EXTRACT_ALL is enabled.

# The default value is: NO.

HIDE_UNDOC_MEMBERS     = NO

# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all

# undocumented classes that are normally visible in the class hierarchy. If set

# to NO, these classes will be included in the various overviews. This option

# has no effect if EXTRACT_ALL is enabled.

# The default value is: NO.

HIDE_UNDOC_CLASSES     = NO

# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend

# (class|struct|union) declarations. If set to NO, these declarations will be

# included in the documentation.

# The default value is: NO.

HIDE_FRIEND_COMPOUNDS  = NO

# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any

# documentation blocks found inside the body of a function. If set to NO, these

# blocks will be appended to the function's detailed documentation block.

# The default value is: NO.

HIDE_IN_BODY_DOCS      = NO

# The INTERNAL_DOCS tag determines if documentation that is typed after a

# \internal command is included. If the tag is set to NO then the documentation

# will be excluded. Set it to YES to include the internal documentation.

# The default value is: NO.

INTERNAL_DOCS          = NO

# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file

# names in lower-case letters. If set to YES, upper-case letters are also

# allowed. This is useful if you have classes or files whose names only differ

# in case and if your file system supports case sensitive file names. Windows

# and Mac users are advised to set this option to NO.

# The default value is: system dependent.

CASE_SENSE_NAMES       = NO

# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with

# their full class and namespace scopes in the documentation. If set to YES, the

# scope will be hidden.

# The default value is: NO.

HIDE_SCOPE_NAMES       = YES

# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will

# append additional text to a page's title, such as Class Reference. If set to

# YES the compound reference will be hidden.

# The default value is: NO.

HIDE_COMPOUND_REFERENCE= NO

# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of

# the files that are included by a file in the documentation of that file.

# The default value is: YES.

SHOW_INCLUDE_FILES     = YES

# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each

# grouped member an include statement to the documentation, telling the reader

# which file to include in order to use the member.

# The default value is: NO.

SHOW_GROUPED_MEMB_INC  = NO

# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include

# files with double quotes in the documentation rather than with sharp brackets.

# The default value is: NO.

FORCE_LOCAL_INCLUDES   = NO

# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the

# documentation for inline members.

# The default value is: YES.

INLINE_INFO            = YES

# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the

# (detailed) documentation of file and class members alphabetically by member

# name. If set to NO, the members will appear in declaration order.

# The default value is: YES.

SORT_MEMBER_DOCS       = YES

# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief

# descriptions of file, namespace and class members alphabetically by member

# name. If set to NO, the members will appear in declaration order. Note that

# this will also influence the order of the classes in the class list.

# The default value is: NO.

SORT_BRIEF_DOCS        = NO

# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the

# (brief and detailed) documentation of class members so that constructors and

# destructors are listed first. If set to NO the constructors will appear in the

# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.

# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief

# member documentation.

# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting

# detailed member documentation.

# The default value is: NO.

SORT_MEMBERS_CTORS_1ST = NO

# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy

# of group names into alphabetical order. If set to NO the group names will

# appear in their defined order.

# The default value is: NO.

SORT_GROUP_NAMES       = NO

# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by

# fully-qualified names, including namespaces. If set to NO, the class list will

# be sorted only by class name, not including the namespace part.

# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

# Note: This option applies only to the class list, not to the alphabetical

# list.

# The default value is: NO.

SORT_BY_SCOPE_NAME     = NO

# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper

# type resolution of all parameters of a function it will reject a match between

# the prototype and the implementation of a member function even if there is

# only one candidate or it is obvious which candidate to choose by doing a

# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still

# accept a match between prototype and implementation in such cases.

# The default value is: NO.

STRICT_PROTO_MATCHING  = NO

# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo

# list. This list is created by putting \todo commands in the documentation.

# The default value is: YES.

GENERATE_TODOLIST      = YES

# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test

# list. This list is created by putting \test commands in the documentation.

# The default value is: YES.

GENERATE_TESTLIST      = YES

# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug

# list. This list is created by putting \bug commands in the documentation.

# The default value is: YES.

GENERATE_BUGLIST       = YES

# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)

# the deprecated list. This list is created by putting \deprecated commands in

# the documentation.

# The default value is: YES.

GENERATE_DEPRECATEDLIST= YES

# The ENABLED_SECTIONS tag can be used to enable conditional documentation

# sections, marked by \if <section_label> ... \endif and \cond <section_label>

# ... \endcond blocks.

ENABLED_SECTIONS       = 

# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the

# initial value of a variable or macro / define can have for it to appear in the

# documentation. If the initializer consists of more lines than specified here

# it will be hidden. Use a value of 0 to hide initializers completely. The

# appearance of the value of individual variables and macros / defines can be

# controlled using \showinitializer or \hideinitializer command in the

# documentation regardless of this setting.

# Minimum value: 0, maximum value: 10000, default value: 30.

MAX_INITIALIZER_LINES  = 30

# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at

# the bottom of the documentation of classes and structs. If set to YES, the

# list will mention the files that were used to generate the documentation.

# The default value is: YES.

SHOW_USED_FILES        = YES

# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This

# will remove the Files entry from the Quick Index and from the Folder Tree View

# (if specified).

# The default value is: YES.

SHOW_FILES             = YES

# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces

# page. This will remove the Namespaces entry from the Quick Index and from the

# Folder Tree View (if specified).

# The default value is: YES.

SHOW_NAMESPACES        = YES

# The FILE_VERSION_FILTER tag can be used to specify a program or script that

# doxygen should invoke to get the current version for each file (typically from

# the version control system). Doxygen will invoke the program by executing (via

# popen()) the command command input-file, where command is the value of the

# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided

# by doxygen. Whatever the program writes to standard output is used as the file

# version. For an example see the documentation.

FILE_VERSION_FILTER    = 

# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed

# by doxygen. The layout file controls the global structure of the generated

# output files in an output format independent way. To create the layout file

# that represents doxygen's defaults, run doxygen with the -l option. You can

# optionally specify a file name after the option, if omitted DoxygenLayout.xml

# will be used as the name of the layout file.

#

# Note that if you run doxygen from a directory containing a file called

# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE

# tag is left empty.

LAYOUT_FILE            = 

# The CITE_BIB_FILES tag can be used to specify one or more bib files containing

# the reference definitions. This must be a list of .bib files. The .bib

# extension is automatically appended if omitted. This requires the bibtex tool

# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.

# For LaTeX the style of the bibliography can be controlled using

# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the

# search path. See also \cite for info how to create references.

CITE_BIB_FILES         = 

#---------------------------------------------------------------------------

# Configuration options related to warning and progress messages

#---------------------------------------------------------------------------

# The QUIET tag can be used to turn on/off the messages that are generated to

# standard output by doxygen. If QUIET is set to YES this implies that the

# messages are off.

# The default value is: NO.

QUIET                  = NO

# The WARNINGS tag can be used to turn on/off the warning messages that are

# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES

# this implies that the warnings are on.

#

# Tip: Turn warnings on while writing the documentation.

# The default value is: YES.

WARNINGS               = YES

# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate

# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag

# will automatically be disabled.

# The default value is: YES.

WARN_IF_UNDOCUMENTED   = YES

# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for

# potential errors in the documentation, such as not documenting some parameters

# in a documented function, or documenting parameters that don't exist or using

# markup commands wrongly.

# The default value is: YES.

WARN_IF_DOC_ERROR      = YES

# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that

# are documented, but have no documentation for their parameters or return

# value. If set to NO, doxygen will only warn about wrong or incomplete

# parameter documentation, but not about the absence of documentation.

# The default value is: NO.

WARN_NO_PARAMDOC       = NO

# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when

# a warning is encountered.

# The default value is: NO.

WARN_AS_ERROR          = NO

# The WARN_FORMAT tag determines the format of the warning messages that doxygen

# can produce. The string should contain the $file, $line, and $text tags, which

# will be replaced by the file and line number from which the warning originated

# and the warning text. Optionally the format may contain $version, which will

# be replaced by the version of the file (if it could be obtained via

# FILE_VERSION_FILTER)

# The default value is: $file:$line: $text.

WARN_FORMAT            = "$file:$line: $text"

# The WARN_LOGFILE tag can be used to specify a file to which warning and error

# messages should be written. If left blank the output is written to standard

# error (stderr).

WARN_LOGFILE           = 

#---------------------------------------------------------------------------

# Configuration options related to the input files

#---------------------------------------------------------------------------

# The INPUT tag is used to specify the files and/or directories that contain

# documented source files. You may enter file names like myfile.cpp or

# directories like /usr/src/myproject. Separate the files or directories with

# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING

# Note: If this tag is empty the current directory is searched.

INPUT                  = ../periphery-lld

# This tag can be used to specify the character encoding of the source files

# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses

# libiconv (or the iconv built into libc) for the transcoding. See the libiconv

# documentation (see: http://www.gnu.org/software/libiconv) for the list of

# possible encodings.

# The default value is: UTF-8.

INPUT_ENCODING         = UTF-8

# If the value of the INPUT tag contains directories, you can use the

# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and

# *.h) to filter out the source-files in the directories.

#

# Note that for custom extensions or not directly supported extensions you also

# need to set EXTENSION_MAPPING for the extension otherwise the files are not

# read by doxygen.

#

# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,

# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,

# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,

# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl,

# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js.

FILE_PATTERNS          = *.c \

                         *.cc \

                         *.cxx \

                         *.cpp \

                         *.c++ \

                         *.java \

                         *.ii \

                         *.ixx \

                         *.ipp \

                         *.i++ \

                         *.inl \

                         *.idl \

                         *.ddl \

                         *.odl \

                         *.h \

                         *.hh \

                         *.hxx \

                         *.hpp \

                         *.h++ \

                         *.cs \

                         *.d \

                         *.php \

                         *.php4 \

                         *.php5 \

                         *.phtml \

                         *.inc \

                         *.m \

                         *.markdown \

                         *.md \

                         *.mm \

                         *.dox \

                         *.py \

                         *.pyw \

                         *.f90 \

                         *.f \

                         *.for \

                         *.tcl \

                         *.vhd \

                         *.vhdl \

                         *.ucf \

                         *.qsf \

                         *.as \

                         *.js

# The RECURSIVE tag can be used to specify whether or not subdirectories should

# be searched for input files as well.

# The default value is: NO.

RECURSIVE              = YES

# The EXCLUDE tag can be used to specify files and/or directories that should be

# excluded from the INPUT source files. This way you can easily exclude a

# subdirectory from a directory tree whose root is specified with the INPUT tag.

#

# Note that relative paths are relative to the directory from which doxygen is

# run.

EXCLUDE                = 

# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or

# directories that are symbolic links (a Unix file system feature) are excluded

# from the input.

# The default value is: NO.

EXCLUDE_SYMLINKS       = NO

# If the value of the INPUT tag contains directories, you can use the

# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

# certain files from those directories.

#

# Note that the wildcards are matched against the file with absolute path, so to

# exclude all test directories for example use the pattern */test/*

EXCLUDE_PATTERNS       = 

# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

# (namespaces, classes, functions, etc.) that should be excluded from the

# output. The symbol name can be a fully qualified name, a word, or if the

# wildcard * is used, a substring. Examples: ANamespace, AClass,

# AClass::ANamespace, ANamespace::*Test

#

# Note that the wildcards are matched against the file with absolute path, so to

# exclude all test directories use the pattern */test/*

EXCLUDE_SYMBOLS        = 

# The EXAMPLE_PATH tag can be used to specify one or more files or directories

# that contain example code fragments that are included (see the \include

# command).

EXAMPLE_PATH           = 

# If the value of the EXAMPLE_PATH tag contains directories, you can use the

# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and

# *.h) to filter out the source-files in the directories. If left blank all

# files are included.

EXAMPLE_PATTERNS       = *

# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

# searched for input files to be used with the \include or \dontinclude commands

# irrespective of the value of the RECURSIVE tag.

# The default value is: NO.

EXAMPLE_RECURSIVE      = NO

# The IMAGE_PATH tag can be used to specify one or more files or directories

# that contain images that are to be included in the documentation (see the

# \image command).

IMAGE_PATH             = 

# The INPUT_FILTER tag can be used to specify a program that doxygen should

# invoke to filter for each input file. Doxygen will invoke the filter program

# by executing (via popen()) the command:

#

# <filter> <input-file>

#

# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the

# name of an input file. Doxygen will then use the output that the filter

# program writes to standard output. If FILTER_PATTERNS is specified, this tag

# will be ignored.

#

# Note that the filter must not add or remove lines; it is applied before the

# code is scanned, but not when the output code is generated. If lines are added

# or removed, the anchors will not be placed correctly.

#

# Note that for custom extensions or not directly supported extensions you also

# need to set EXTENSION_MAPPING for the extension otherwise the files are not

# properly processed by doxygen.

INPUT_FILTER           = 

# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

# basis. Doxygen will compare the file name with each pattern and apply the

# filter if there is a match. The filters are a list of the form: pattern=filter

# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how

# filters are used. If the FILTER_PATTERNS tag is empty or if none of the

# patterns match the file name, INPUT_FILTER is applied.

#

# Note that for custom extensions or not directly supported extensions you also

# need to set EXTENSION_MAPPING for the extension otherwise the files are not

# properly processed by doxygen.

FILTER_PATTERNS        = 

# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

# INPUT_FILTER) will also be used to filter the input files that are used for

# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).

# The default value is: NO.

FILTER_SOURCE_FILES    = NO

# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file

# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and

# it is also possible to disable source filtering for a specific pattern using

# *.ext= (so without naming a filter).

# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.

FILTER_SOURCE_PATTERNS = 

# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that

# is part of the input, its contents will be placed on the main page

# (index.html). This can be useful if you have a project on for instance GitHub

# and want to reuse the introduction page also for the doxygen output.

USE_MDFILE_AS_MAINPAGE = 

#---------------------------------------------------------------------------

# Configuration options related to source browsing

#---------------------------------------------------------------------------

# If the SOURCE_BROWSER tag is set to YES then a list of source files will be

# generated. Documented entities will be cross-referenced with these sources.

#

# Note: To get rid of all source code in the generated output, make sure that

# also VERBATIM_HEADERS is set to NO.

# The default value is: NO.

SOURCE_BROWSER         = NO

# Setting the INLINE_SOURCES tag to YES will include the body of functions,

# classes and enums directly into the documentation.

# The default value is: NO.

INLINE_SOURCES         = NO

# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any

# special comment blocks from generated source code fragments. Normal C, C++ and

# Fortran comments will always remain visible.

# The default value is: YES.

STRIP_CODE_COMMENTS    = YES

# If the REFERENCED_BY_RELATION tag is set to YES then for each documented

# function all documented functions referencing it will be listed.

# The default value is: NO.

REFERENCED_BY_RELATION = NO

# If the REFERENCES_RELATION tag is set to YES then for each documented function

# all documented entities called/used by that function will be listed.

# The default value is: NO.

REFERENCES_RELATION    = NO

# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set

# to YES then the hyperlinks from functions in REFERENCES_RELATION and

# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will

# link to the documentation.

# The default value is: YES.

REFERENCES_LINK_SOURCE = YES

# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the

# source code will show a tooltip with additional information such as prototype,

# brief description and links to the definition and documentation. Since this

# will make the HTML file larger and loading of large files a bit slower, you

# can opt to disable this feature.

# The default value is: YES.

# This tag requires that the tag SOURCE_BROWSER is set to YES.

SOURCE_TOOLTIPS        = YES

# If the USE_HTAGS tag is set to YES then the references to source code will

# point to the HTML generated by the htags(1) tool instead of doxygen built-in

# source browser. The htags tool is part of GNU's global source tagging system

# (see http://www.gnu.org/software/global/global.html). You will need version

# 4.8.6 or higher.

#

# To use it do the following:

# - Install the latest version of global

# - Enable SOURCE_BROWSER and USE_HTAGS in the config file

# - Make sure the INPUT points to the root of the source tree

# - Run doxygen as normal

#

# Doxygen will invoke htags (and that will in turn invoke gtags), so these

# tools must be available from the command line (i.e. in the search path).

#

# The result: instead of the source browser generated by doxygen, the links to

# source code will now point to the output of htags.

# The default value is: NO.

# This tag requires that the tag SOURCE_BROWSER is set to YES.

USE_HTAGS              = NO

# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a

# verbatim copy of the header file for each class for which an include is

# specified. Set to NO to disable this.

# See also: Section \class.

# The default value is: YES.

VERBATIM_HEADERS       = YES

# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the

# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the

# cost of reduced performance. This can be particularly helpful with template

# rich C++ code for which doxygen's built-in parser lacks the necessary type

# information.

# Note: The availability of this option depends on whether or not doxygen was

# generated with the -Duse-libclang=ON option for CMake.

# The default value is: NO.

CLANG_ASSISTED_PARSING = NO

# If clang assisted parsing is enabled you can provide the compiler with command

# line options that you would normally use when invoking the compiler. Note that

# the include paths will already be set by doxygen for the files and directories

# specified with INPUT and INCLUDE_PATH.

# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.

CLANG_OPTIONS          = 

#---------------------------------------------------------------------------

# Configuration options related to the alphabetical class index

#---------------------------------------------------------------------------

# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all

# compounds will be generated. Enable this if the project contains a lot of

# classes, structs, unions or interfaces.

# The default value is: YES.

ALPHABETICAL_INDEX     = YES

# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in

# which the alphabetical index list will be split.

# Minimum value: 1, maximum value: 20, default value: 5.

# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

COLS_IN_ALPHA_INDEX    = 5

# In case all classes in a project start with a common prefix, all classes will

# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag

# can be used to specify a prefix (or a list of prefixes) that should be ignored

# while generating the index headers.

# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

IGNORE_PREFIX          = 

#---------------------------------------------------------------------------

# Configuration options related to the HTML output

#---------------------------------------------------------------------------

# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output

# The default value is: YES.

GENERATE_HTML          = YES

# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a

# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of

# it.

# The default directory is: html.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_OUTPUT            = html

# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each

# generated HTML page (for example: .htm, .php, .asp).

# The default value is: .html.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_FILE_EXTENSION    = .html

# The HTML_HEADER tag can be used to specify a user-defined HTML header file for

# each generated HTML page. If the tag is left blank doxygen will generate a

# standard header.

#

# To get valid HTML the header file that includes any scripts and style sheets

# that doxygen needs, which is dependent on the configuration options used (e.g.

# the setting GENERATE_TREEVIEW). It is highly recommended to start with a

# default header using

# doxygen -w html new_header.html new_footer.html new_stylesheet.css

# YourConfigFile

# and then modify the file new_header.html. See also section "Doxygen usage"

# for information on how to generate the default header that doxygen normally

# uses.

# Note: The header is subject to change so you typically have to regenerate the

# default header when upgrading to a newer version of doxygen. For a description

# of the possible markers and block names see the documentation.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_HEADER            = 

# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each

# generated HTML page. If the tag is left blank doxygen will generate a standard

# footer. See HTML_HEADER for more information on how to generate a default

# footer and what special commands can be used inside the footer. See also

# section "Doxygen usage" for information on how to generate the default footer

# that doxygen normally uses.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_FOOTER            = 

# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style

# sheet that is used by each HTML page. It can be used to fine-tune the look of

# the HTML output. If left blank doxygen will generate a default style sheet.

# See also section "Doxygen usage" for information on how to generate the style

# sheet that doxygen normally uses.

# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as

# it is more robust and this tag (HTML_STYLESHEET) will in the future become

# obsolete.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_STYLESHEET        = 

# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined

# cascading style sheets that are included after the standard style sheets

# created by doxygen. Using this option one can overrule certain style aspects.

# This is preferred over using HTML_STYLESHEET since it does not replace the

# standard style sheet and is therefore more robust against future updates.

# Doxygen will copy the style sheet files to the output directory.

# Note: The order of the extra style sheet files is of importance (e.g. the last

# style sheet in the list overrules the setting of the previous ones in the

# list). For an example see the documentation.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_EXTRA_STYLESHEET  = 

# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or

# other source files which should be copied to the HTML output directory. Note

# that these files will be copied to the base HTML output directory. Use the

# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these

# files. In the HTML_STYLESHEET file, use the file name only. Also note that the

# files will be copied as-is; there are no commands or markers available.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_EXTRA_FILES       = 

# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen

# will adjust the colors in the style sheet and background images according to

# this color. Hue is specified as an angle on a colorwheel, see

# http://en.wikipedia.org/wiki/Hue for more information. For instance the value

# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300

# purple, and 360 is red again.

# Minimum value: 0, maximum value: 359, default value: 220.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_COLORSTYLE_HUE    = 220

# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors

# in the HTML output. For a value of 0 the output will use grayscales only. A

# value of 255 will produce the most vivid colors.

# Minimum value: 0, maximum value: 255, default value: 100.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_COLORSTYLE_SAT    = 100

# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the

# luminance component of the colors in the HTML output. Values below 100

# gradually make the output lighter, whereas values above 100 make the output

# darker. The value divided by 100 is the actual gamma applied, so 80 represents

# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not

# change the gamma.

# Minimum value: 40, maximum value: 240, default value: 80.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_COLORSTYLE_GAMMA  = 80

# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML

# page will contain the date and time when the page was generated. Setting this

# to YES can help to show when doxygen was last run and thus if the

# documentation is up to date.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_TIMESTAMP         = NO

# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

# documentation will contain sections that can be hidden and shown after the

# page has loaded.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_DYNAMIC_SECTIONS  = NO

# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries

# shown in the various tree structured indices initially; the user can expand

# and collapse entries dynamically later on. Doxygen will expand the tree to

# such a level that at most the specified number of entries are visible (unless

# a fully collapsed tree already exceeds this amount). So setting the number of

# entries 1 will produce a full collapsed tree by default. 0 is a special value

# representing an infinite number of entries and will result in a full expanded

# tree by default.

# Minimum value: 0, maximum value: 9999, default value: 100.

# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_INDEX_NUM_ENTRIES = 100

# If the GENERATE_DOCSET tag is set to YES, additional index files will be

# generated that can be used as input for Apple's Xcode 3 integrated development

# environment (see: http://developer.apple.com/tools/xcode/), introduced with

# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a

# Makefile in the HTML output directory. Running make will produce the docset in

# that directory and running make install will install the docset in

# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at

# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html

# for more information.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_DOCSET        = NO

# This tag determines the name of the docset feed. A documentation feed provides

# an umbrella under which multiple documentation sets from a single provider

# (such as a company or product suite) can be grouped.

# The default value is: Doxygen generated docs.

# This tag requires that the tag GENERATE_DOCSET is set to YES.

DOCSET_FEEDNAME        = "Doxygen generated docs"

# This tag specifies a string that should uniquely identify the documentation

# set bundle. This should be a reverse domain-name style string, e.g.

# com.mycompany.MyDocSet. Doxygen will append .docset to the name.

# The default value is: org.doxygen.Project.

# This tag requires that the tag GENERATE_DOCSET is set to YES.

DOCSET_BUNDLE_ID       = org.doxygen.Project

# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify

# the documentation publisher. This should be a reverse domain-name style

# string, e.g. com.mycompany.MyDocSet.documentation.

# The default value is: org.doxygen.Publisher.

# This tag requires that the tag GENERATE_DOCSET is set to YES.

DOCSET_PUBLISHER_ID    = org.doxygen.Publisher

# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.

# The default value is: Publisher.

# This tag requires that the tag GENERATE_DOCSET is set to YES.

DOCSET_PUBLISHER_NAME  = Publisher

# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three

# additional HTML index files: index.hhp, index.hhc, and index.hhk. The

# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop

# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on

# Windows.

#

# The HTML Help Workshop contains a compiler that can convert all HTML output

# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML

# files are now used as the Windows 98 help format, and will replace the old

# Windows help format (.hlp) on all Windows platforms in the future. Compressed

# HTML files also contain an index, a table of contents, and you can search for

# words in the documentation. The HTML workshop also contains a viewer for

# compressed HTML files.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_HTMLHELP      = NO

# The CHM_FILE tag can be used to specify the file name of the resulting .chm

# file. You can add a path in front of the file if the result should not be

# written to the html output directory.

# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

CHM_FILE               = 

# The HHC_LOCATION tag can be used to specify the location (absolute path

# including file name) of the HTML help compiler (hhc.exe). If non-empty,

# doxygen will try to run the HTML help compiler on the generated index.hhp.

# The file has to be specified with full path.

# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

HHC_LOCATION           = 

# The GENERATE_CHI flag controls if a separate .chi index file is generated

# (YES) or that it should be included in the master .chm file (NO).

# The default value is: NO.

# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

GENERATE_CHI           = NO

# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)

# and project file content.

# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

CHM_INDEX_ENCODING     = 

# The BINARY_TOC flag controls whether a binary table of contents is generated

# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it

# enables the Previous and Next buttons.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

BINARY_TOC             = NO

# The TOC_EXPAND flag can be set to YES to add extra items for group members to

# the table of contents of the HTML help documentation and to the tree view.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

TOC_EXPAND             = NO

# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and

# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that

# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help

# (.qch) of the generated HTML documentation.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_QHP           = NO

# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify

# the file name of the resulting .qch file. The path specified is relative to

# the HTML output folder.

# This tag requires that the tag GENERATE_QHP is set to YES.

QCH_FILE               = 

# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help

# Project output. For more information please see Qt Help Project / Namespace

# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).

# The default value is: org.doxygen.Project.

# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_NAMESPACE          = org.doxygen.Project

# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt

# Help Project output. For more information please see Qt Help Project / Virtual

# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-

# folders).

# The default value is: doc.

# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_VIRTUAL_FOLDER     = doc

# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom

# filter to add. For more information please see Qt Help Project / Custom

# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-

# filters).

# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_CUST_FILTER_NAME   = 

# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the

# custom filter to add. For more information please see Qt Help Project / Custom

# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-

# filters).

# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_CUST_FILTER_ATTRS  = 

# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this

# project's filter section matches. Qt Help Project / Filter Attributes (see:

# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).

# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_SECT_FILTER_ATTRS  = 

# The QHG_LOCATION tag can be used to specify the location of Qt's

# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the

# generated .qhp file.

# This tag requires that the tag GENERATE_QHP is set to YES.

QHG_LOCATION           = 

# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be

# generated, together with the HTML files, they form an Eclipse help plugin. To

# install this plugin and make it available under the help contents menu in

# Eclipse, the contents of the directory containing the HTML and XML files needs

# to be copied into the plugins directory of eclipse. The name of the directory

# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.

# After copying Eclipse needs to be restarted before the help appears.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_ECLIPSEHELP   = NO

# A unique identifier for the Eclipse help plugin. When installing the plugin

# the directory name containing the HTML and XML files should also have this

# name. Each documentation set should have its own identifier.

# The default value is: org.doxygen.Project.

# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.

ECLIPSE_DOC_ID         = org.doxygen.Project

# If you want full control over the layout of the generated HTML pages it might

# be necessary to disable the index and replace it with your own. The

# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top

# of each HTML page. A value of NO enables the index and the value YES disables

# it. Since the tabs in the index contain the same information as the navigation

# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

DISABLE_INDEX          = NO

# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

# structure should be generated to display hierarchical information. If the tag

# value is set to YES, a side panel will be generated containing a tree-like

# index structure (just like the one that is generated for HTML Help). For this

# to work a browser that supports JavaScript, DHTML, CSS and frames is required

# (i.e. any modern browser). Windows users are probably better off using the

# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can

# further fine-tune the look of the index. As an example, the default style

# sheet generated by doxygen has an example that shows how to put an image at

# the root of the tree instead of the PROJECT_NAME. Since the tree basically has

# the same information as the tab index, you could consider setting

# DISABLE_INDEX to YES when enabling this option.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_TREEVIEW      = NO

# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that

# doxygen will group on one line in the generated HTML documentation.

#

# Note that a value of 0 will completely suppress the enum values from appearing

# in the overview section.

# Minimum value: 0, maximum value: 20, default value: 4.

# This tag requires that the tag GENERATE_HTML is set to YES.

ENUM_VALUES_PER_LINE   = 4

# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used

# to set the initial width (in pixels) of the frame in which the tree is shown.

# Minimum value: 0, maximum value: 1500, default value: 250.

# This tag requires that the tag GENERATE_HTML is set to YES.

TREEVIEW_WIDTH         = 250

# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to

# external symbols imported via tag files in a separate window.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

EXT_LINKS_IN_WINDOW    = NO

# Use this tag to change the font size of LaTeX formulas included as images in

# the HTML documentation. When you change the font size after a successful

# doxygen run you need to manually remove any form_*.png images from the HTML

# output directory to force them to be regenerated.

# Minimum value: 8, maximum value: 50, default value: 10.

# This tag requires that the tag GENERATE_HTML is set to YES.

FORMULA_FONTSIZE       = 10

# Use the FORMULA_TRANPARENT tag to determine whether or not the images

# generated for formulas are transparent PNGs. Transparent PNGs are not

# supported properly for IE 6.0, but are supported on all modern browsers.

#

# Note that when changing this option you need to delete any form_*.png files in

# the HTML output directory before the changes have effect.

# The default value is: YES.

# This tag requires that the tag GENERATE_HTML is set to YES.

FORMULA_TRANSPARENT    = YES

# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see

# http://www.mathjax.org) which uses client side Javascript for the rendering

# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX

# installed or if you want to formulas look prettier in the HTML output. When

# enabled you may also need to install MathJax separately and configure the path

# to it using the MATHJAX_RELPATH option.

# The default value is: NO.

# This tag requires that the tag GENERATE_HTML is set to YES.

USE_MATHJAX            = NO

# When MathJax is enabled you can set the default output format to be used for

# the MathJax output. See the MathJax site (see:

# http://docs.mathjax.org/en/latest/output.html) for more details.

# Possible values are: HTML-CSS (which is slower, but has the best

# compatibility), NativeMML (i.e. MathML) and SVG.

# The default value is: HTML-CSS.

# This tag requires that the tag USE_MATHJAX is set to YES.

MATHJAX_FORMAT         = HTML-CSS

# When MathJax is enabled you need to specify the location relative to the HTML

# output directory using the MATHJAX_RELPATH option. The destination directory

# should contain the MathJax.js script. For instance, if the mathjax directory

# is located at the same level as the HTML output directory, then

# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax

# Content Delivery Network so you can quickly see the result without installing

# MathJax. However, it is strongly recommended to install a local copy of

# MathJax from http://www.mathjax.org before deployment.

# The default value is: http://cdn.mathjax.org/mathjax/latest.

# This tag requires that the tag USE_MATHJAX is set to YES.

MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest

# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax

# extension names that should be enabled during MathJax rendering. For example

# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols

# This tag requires that the tag USE_MATHJAX is set to YES.

MATHJAX_EXTENSIONS     = 

# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces

# of code that will be used on startup of the MathJax code. See the MathJax site

# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an

# example see the documentation.

# This tag requires that the tag USE_MATHJAX is set to YES.

MATHJAX_CODEFILE       = 

# When the SEARCHENGINE tag is enabled doxygen will generate a search box for

# the HTML output. The underlying search engine uses javascript and DHTML and

# should work on any modern browser. Note that when using HTML help

# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)

# there is already a search function so this one should typically be disabled.

# For large projects the javascript based search engine can be slow, then

# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to

# search using the keyboard; to jump to the search box use <access key> + S

# (what the <access key> is depends on the OS and browser, but it is typically

# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down

# key> to jump into the search results window, the results can be navigated

# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel

# the search. The filter options can be selected when the cursor is inside the

# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>

# to select a filter and <Enter> or <escape> to activate or cancel the filter

# option.

# The default value is: YES.

# This tag requires that the tag GENERATE_HTML is set to YES.