AMiRo-OS

#include <amiro/power/adconverter.hpp>

#include <global.hpp>

#include <amiro/Constants.h>

#include <amiro/power/ina219.hpp>

#include <amiro/util/util.h>

#include <chprintf.h>

using namespace amiro;

extern Global global;

void adcVsysErrorCallback(ADCDriver *adcp, adcerror_t err)

{

  if (err == ADC_ERR_WATCHDOG) {

    chSysLockFromIsr();

    if (adcp->thread != NULL) {

      chEvtSignalI(adcp->thread, EVENT_MASK(ADConverter::EVT_WATCHDOG));

      adcp->thread = NULL;

    }

    chSysUnlockFromIsr();

  }

  return;

}

void adcTimerCallback(Thread *tp)

{

  if (tp != NULL) {

    chEvtSignal(tp, EVENT_MASK(ADConverter::EVT_TIMER));

  }

  return;

}

uint16_t

ADConverter::uV2Adc(const uint32_t uV)

{

  // NOTE: The factor 5.33 is an approximation of the voltage divider.

  //       Its value should be 5.0, but due to too large resistors the factor is shifted.

  // TODO: 5.33 should be replaced by a non linear function, which needs to be optained from the system.

  // get the current VDD voltage

  global.ina219[constants::PowerManagement::INA_VDD].update();

  INA219::BusVoltage vdd = global.ina219[constants::PowerManagement::INA_VDD].getVoltage();

  return float(uV)/1000000 / 5.33f / (float(vdd.voltage_uV)/1000000) * 4096;

}

uint32_t ADConverter::adc2uV(const uint16_t adc)

{

  // NOTE: The factor 5.33 is an approximation of the voltage divider.

  //       Its value should be 5.0, but due to too large resistors the factor is shifted.

  // TODO: 5.33 should be replaced by a non linear function, which needs to be optained from the system.

  // get the current VDD voltage

  global.ina219[constants::PowerManagement::INA_VDD].update();

  INA219::BusVoltage vdd = global.ina219[constants::PowerManagement::INA_VDD].getVoltage();

  return float(adc)/4096 * (float(vdd.voltage_uV)/1000000) * 5.33f * 1000000;

}

ADConverter::ADConverter(ADCDriver& adcdrv, ADCConversionGroup& adccgrp, const uint32_t threshold_uV) :

  driver(adcdrv), conversion_group(adccgrp), watchdog_threshold_uV(threshold_uV)

{

}

ADConverter::~ADConverter()

{

}

msg_t

ADConverter::main()

{

  // initialize a timer event for later use

  evtInit(&this->evt_timer, MS2ST(1));

  this->evt_source = reinterpret_cast<EvtSource*>(&this->evt_timer.et_es);

  this->evt_source->registerOne(&this->evt_listener, EVT_TIMER);

  // initialize the watchdog

  this->enableWatchdog(true);

  this->conversion_group.htr = ADC_HTR(uV2Adc(this->watchdog_threshold_uV));

  this->conversion_group.ltr = 0;

  this->driver.thread = this->thread_ref;

  adcStartConversion(&this->driver, &this->conversion_group, global.adc1_buffer, ARRAY_SIZE(global.adc1_buffer));

  while (!this->shouldTerminate())

  {

    eventmask_t event = this->waitOneEventTimeout(ALL_EVENTS, MS2ST(1000));

    switch (event)

    {

      // watchdog event (fired by ADC interrupt)

      case EVENT_MASK(EVT_WATCHDOG):

      {

        // disable the chargers

        global.bq24103a[constants::PowerManagement::BAT_P7]->enable(false);

        global.bq24103a[constants::PowerManagement::BAT_P8]->enable(false);

        // to avoid multiple interrupts because of noise, wait 1ms before setting the chargers and ADC

        this->enableWatchdog(false);

        evtStart(&this->evt_timer);

        break;

      }

      // timer event

      case EVENT_MASK(EVT_TIMER):

      {

        evtStop(&this->evt_timer);

        // read the current voltage

        this->conversion_group.circular = FALSE;

        adcConvert(&this->driver, &this->conversion_group, global.adc1_buffer, ARRAY_SIZE(global.adc1_buffer));

        this->conversion_group.circular = TRUE;

        this->enableWatchdog(true); // Watchdog was disabled in ISR

        if (global.adc1_buffer[0] > uV2Adc(this->watchdog_threshold_uV))

        {

          chprintf((BaseSequentialStream*)&global.sercanmux1, "%f > 9V detected: now charging\n", ((float)adc2uV(global.adc1_buffer[0]))/1000000.0f);

          global.robot.getPowerStatus().charging_flags.content.vsys_higher_than_9V = true;

          global.bq24103a[constants::PowerManagement::BAT_P7]->enable(true);

          global.bq24103a[constants::PowerManagement::BAT_P8]->enable(true);

          this->conversion_group.htr = ADC_HTR_HT;

          this->conversion_group.ltr = ADC_LTR(uV2Adc(this->watchdog_threshold_uV));

        } else {

          chprintf((BaseSequentialStream*)&global.sercanmux1, "%f < 9V detected: not charging\n", ((float)adc2uV(global.adc1_buffer[0]))/1000000.0f);

          global.robot.getPowerStatus().charging_flags.content.vsys_higher_than_9V = false;

          this->conversion_group.htr = ADC_HTR(uV2Adc(this->watchdog_threshold_uV));

          this->conversion_group.ltr = 0;

        }

        this->driver.thread = this->thread_ref;

        adcStartConversion(&this->driver, &this->conversion_group, global.adc1_buffer, ARRAY_SIZE(global.adc1_buffer));

        break;

      }

      // timeout

      case 0:

      default:

        break;

    }

  }

  return RDY_RESET;

}

void

ADConverter::enableWatchdog(const bool enable)

{

  if (enable) {

    this->conversion_group.cr1 |= ADC_CR1_AWDEN | ADC_CR1_AWDIE;

    this->conversion_group.error_cb = &adcVsysErrorCallback;

  } else {

    this->conversion_group.cr1 &= ~(ADC_CR1_AWDEN | ADC_CR1_AWDIE);

    this->conversion_group.error_cb = NULL;

  }

}