AMiRo-OS

/*

AMiRo-OS is an operating system designed for the Autonomous Mini Robot (AMiRo) platform.

Copyright (C) 2016..2019  Thomas Schöpping et al.

This program is free software: you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation, either version 3 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program.  If not, see <http://www.gnu.org/licenses/>.

*/

#include <amiroos.h>

#if ((AMIROOS_CFG_TESTS_ENABLE == true) && defined(AMIROLLD_CFG_DW1000) && (AMIROLLD_CFG_DW1000 == 1)) || defined(__DOXYGEN__)

#include <aos_debug.h>

#include <chprintf.h>

#include <aos_thread.h>

#include <math.h>

#include <module.h>

#include <alld_DW1000.h>

#include <v1/deca_instance_v1.h>

/******************************************************************************/

/* LOCAL DEFINITIONS                                                          */

/******************************************************************************/

//#define UNIT_TEST_SNIPPETS_DW1000   // switch between unit test and demo apps

#define SWS1_SHF_MODE 0x02  //short frame mode (6.81M)

#define SWS1_CH5_MODE 0x04  //channel 5 mode

#define SWS1_ANC_MODE 0x08  //anchor mode

#define SWS1_A1A_MODE 0x10  //anchor/tag address A1

#define SWS1_A2A_MODE 0x20  //anchor/tag address A2

#define SWS1_A3A_MODE 0x40  //anchor/tag address A3

#define SWS1_USB2SPI_MODE 0x78  //USB to SPI mode

#define S1_SWITCH_ON  (1)

#define S1_SWITCH_OFF (0)

/******************************************************************************/

/* EXPORTED VARIABLES                                                         */

/******************************************************************************/

/******************************************************************************/

/* LOCAL TYPES                                                                */

/******************************************************************************/

/******************************************************************************/

/* LOCAL VARIABLES                                                            */

/******************************************************************************/

uint8_t s1switch = 0;

int instance_anchaddr = 0;

int dr_mode = 0;

int chan, tagaddr, ancaddr;

int instance_mode = ANCHOR;

DW1000Driver* spiDrv;

/******************************************************************************/

/* LOCAL FUNCTIONS                                                            */

/******************************************************************************/

/*! @brief Change the SPI speed configuration  on the fly */

void setHighSpeed_SPI(bool speedValue){

  spiStop(&MODULE_HAL_SPI_UWB);

  //  spiAcquireBus(&MODULE_HAL_SPI_UWB);

  if (speedValue == FALSE){

    spiStart(&MODULE_HAL_SPI_UWB, &moduleHalSpiUwbLsConfig);  // low speed spi configuration

  }

  else{

    spiStart(&MODULE_HAL_SPI_UWB, &moduleHalSpiUwbHsConfig); // high speed spi configuration

  }

}

/* void setHighSpeed_SPI(bool speedValue){

  spiStop(spiDrv->spid);

  //  spiAcquireBus(&MODULE_HAL_SPI_UWB);

  if (speedValue == FALSE){

    spiStart(spiDrv->spid, &moduleHalSpiUwbLsConfig);  // low speed spi configuration

  }

  else{

    spiStart(spiDrv->spid, &moduleHalSpiUwbHsConfig); // high speed spi configuration

  }

} */

/*! @brief Manually set the chip select pin of the SPI */

void port_SPIx_set_chip_select(void){

  apalGpioWrite(moduleGpioSpiChipSelect.gpio, APAL_GPIO_HIGH);

}

/*! @brief Manually reset the chip select pin of the SPI */

void port_SPIx_clear_chip_select(void){

  apalGpioWrite(moduleGpioSpiChipSelect.gpio, APAL_GPIO_LOW);

}

/*! @brief Manually reset the DW1000 module  */

void reset_DW1000(void){

  // Set the pin as output

  palSetPadMode(moduleGpioDw1000Reset.gpio->port, moduleGpioDw1000Reset.gpio->pad, APAL_GPIO_DIRECTION_OUTPUT);

  //drive the RSTn pin low

  apalGpioWrite(moduleGpioDw1000Reset.gpio, APAL_GPIO_LOW);

  //put the pin back to tri-state ... as input

//  palSetPadMode(moduleGpioDw1000Reset.gpio->port, moduleGpioDw1000Reset.gpio->pad, APAL_GPIO_DIRECTION_INPUT); // TODO:

  aosThdMSleep(2);

}

/*! @brief Configure instance tag/anchor/etc... addresses

 *

 * */

void addressconfigure(uint8_t s1switch, uint8_t mode){

  uint16_t instAddress ;

  instance_anchaddr = (((s1switch & SWS1_A1A_MODE) << 2) + (s1switch & SWS1_A2A_MODE) + ((s1switch & SWS1_A3A_MODE) >> 2)) >> 4;

  if(mode == ANCHOR) {

    if(instance_anchaddr > 3) {

      instAddress = GATEWAY_ANCHOR_ADDR | 0x4 ; //listener

    }

    else {

      instAddress = GATEWAY_ANCHOR_ADDR | (uint16_t)instance_anchaddr;

    }

  }

  else{

    instAddress = (uint16_t)instance_anchaddr;

  }

  instancesetaddresses(instAddress);

}

/*! @brief returns the use case / operational mode

 *

 * */

int decarangingmode(uint8_t s1switch){

  int mode = 0;

  if(s1switch & SWS1_SHF_MODE)  {

    mode = 1;

  }

  if(s1switch & SWS1_CH5_MODE) {

    mode = mode + 2;

  }

  return mode;

}

/*! @brief Check connection setting and initialize DW1000 module

 *

 **/

uint32_t inittestapplication(uint8_t s1switch){

  uint32_t devID ;

  int result;

  setHighSpeed_SPI(FALSE);          //low speed spi max. ~4M

  devID = instancereaddeviceid() ;

  if(DWT_DEVICE_ID != devID) {

    port_SPIx_clear_chip_select();

    Sleep(1);

    port_SPIx_set_chip_select();

    Sleep(7);

    devID = instancereaddeviceid() ;

    if(DWT_DEVICE_ID != devID){

      return(-1) ;  // SPI not working or Unsupported Device ID

    }    

    dwt_softreset();//clear the sleep bit - so that after the hard reset below the DW does not go into sleep

  }

    reset_DW1000();  //reset the DW1000 by driving the RSTn line low

  if((s1switch & SWS1_ANC_MODE) == 0){

    instance_mode = TAG;

  }

  else{

    instance_mode = ANCHOR;

  }

  result = instance_init(spiDrv) ; // TODO

//  result = instance_init() ;

  if (0 > result){

    return(-1) ;

  }

  setHighSpeed_SPI(TRUE);               // high speed spi max. ~ 20M

  devID = instancereaddeviceid() ;

  if (DWT_DEVICE_ID != devID){

    return(-1) ;

  }

  addressconfigure(s1switch, (uint8_t)instance_mode) ;

  if((instance_mode == ANCHOR) && (instance_anchaddr > 0x3)){

    instance_mode = LISTENER;

  }

  instancesetrole(instance_mode) ;       // Set this instance role

  dr_mode = decarangingmode(s1switch);

  chan = chConfig[dr_mode].channelNumber ;

  instance_config(&chConfig[dr_mode], &sfConfig[dr_mode]) ;

  return devID;

}

/*! @brief Main Entry point to Initialization of UWB DW1000 configuration

 *

 * */

#pragma GCC optimize ("O3")

int UWB_Init(void){

  /*! Software defined Configurartion for TAG, ANC, and other settings as needed */

  s1switch = S1_SWITCH_OFF << 1 // is_switch_on(TA_SW1_2) << 2  // (on = 6.8 Mbps, off = 110 kbps)

                              | S1_SWITCH_OFF << 2  // (on = CH5, off = CH2)

                              | S1_SWITCH_OFF << 3  // (on = Anchor, off = TAG)

                              | S1_SWITCH_OFF << 4  // (configure Tag or anchor ID no.)

                              | S1_SWITCH_OFF << 5  // (configure Tag or anchor ID no.)

                              | S1_SWITCH_OFF << 6  // (configure Tag or anchor ID no.)

                              | S1_SWITCH_OFF << 7; // Not use in this demo

  port_DisableEXT_IRQ();           //disable ScenSor IRQ until we configure the device

  if((s1switch & SWS1_USB2SPI_MODE) == SWS1_USB2SPI_MODE){

    return 1;

  }

  else{

    //run RTLS application

    if(inittestapplication(s1switch) == (uint32_t)-1) {

      return 0; //error

    }

    aosThdMSleep(5);

  }

  port_EnableEXT_IRQ();           //enable ScenSor IRQ before starting

  return 0;

}

/******************************************************************************/

/* EXPORTED FUNCTIONS                                                         */

/******************************************************************************/

aos_utresult_t utAlldDw1000Func(BaseSequentialStream* stream, aos_unittest_t* ut) {

  aosDbgCheck(ut->data != NULL);

  aos_utresult_t result = {0, 0};

  /*! Unit Test snippets for DW1000.

     * @Note: Passed all 4 unit tests. Event IRQ should be tested separately

     */

#ifdef UNIT_TEST_SNIPPETS_DW1000

  uint32_t actual_deviceId;

  chprintf(stream, "init DW1000...\n");

  dwt_initialise(DWT_LOADUCODE, (DW1000Driver*) ut->data);

  aosThdMSleep(5);

  port_DisableEXT_IRQ();

  setHighSpeed_SPI(false);

  chprintf(stream, "expected device ID (LS SPI): 0xDECA0130 \n");

  aosThdMSleep(5);

  actual_deviceId = instancereaddeviceid();

  chprintf(stream, "actual read ID: 0x%x\n", actual_deviceId);

  aosThdMSleep(5);

  if(DWT_DEVICE_ID != actual_deviceId) //if the read of device ID fails, the DW1000 could be asleep

  {

    port_SPIx_clear_chip_select();  //CS low

    aosThdMSleep(1);   //200 us to wake up then waits 5ms for DW1000 XTAL to stabilise

    port_SPIx_set_chip_select();  //CS high

    aosThdMSleep(7);

    actual_deviceId = instancereaddeviceid() ;

    // SPI not working or Unsupported Device ID

    if(DWT_DEVICE_ID != actual_deviceId){

      chprintf(stream, "SPI not working or Unsupported Device ID\n");

      chprintf(stream, "actual device ID is: 0x%x\n", actual_deviceId);

      chprintf(stream, "expected device ID: 0xDECA0130 \n");

      aosThdMSleep(5);

      //          return(-1) ;

    }

    //clear the sleep bit - so that after the hard reset below the DW does not go into sleep

    dwt_softreset();

  }

  /*! Low speed SPI unit test result */

  if (actual_deviceId == DWT_DEVICE_ID){

    aosUtPassed(stream, &result);

  } else {

    aosUtFailed(stream, &result);

  }

  reset_DW1000();

  chprintf(stream, " Initialise instance for DW1000 \n");

  aosThdSleep(5);

  int x_init = instance_init((DW1000Driver*) ut->data) ;   // TODO

//  int x_init = instance_init() ;

  if (0 != x_init){

    chprintf(stream, "Init error with return value: %d \n", x_init);

    aosThdSleep(5);

  }

  else {

    chprintf(stream, "Init success with return value: %d \n", x_init);

    aosThdSleep(5);

  }

  /* Initialization unit test result */

  if (x_init == 0){

    aosUtPassed(stream, &result);

  } else {

    aosUtFailed(stream, &result);

  }

  setHighSpeed_SPI(true);

  chprintf(stream, "expected device ID (HS SPI): 0xDECA0130\n");

  actual_deviceId = instancereaddeviceid();

  chprintf(stream, "actual read ID: 0x%x\n", actual_deviceId);

  aosThdMSleep(5);

  /* High speed SPI unit test result */

  if (actual_deviceId == DWT_DEVICE_ID){

    aosUtPassed(stream, &result);

  } else {

    aosUtFailed(stream, &result);

  }

  port_EnableEXT_IRQ();

  reset_DW1000();

  chprintf(stream, " Initialise the configuration for UWB application \n");

  aosThdSleep(5);

  int uwb_init = UWB_Init();

  if (0 != uwb_init){

    chprintf(stream, "UWB config error with return value: %d \n", uwb_init);

    aosThdSleep(5);

  }

  else {

    chprintf(stream, "UWB config success with return value: %d \n", uwb_init);

    aosThdSleep(5);

  }

  /* UWB configuration unit test.

   * If all the four unit tests are passed, the module is ready to run.

   * Note that the interrupt IRQn should be tested separately.

   */

  if (uwb_init == 0){

    aosUtPassed(stream, &result);

  } else {

    aosUtFailed(stream, &result);

  }

  /************** End of UNIT_TEST_SNIPPETS_DW1000*****************/

#else

  // RUN THE STATE MACHINE DEMO APP

  chprintf(stream, " Initialise the State Machine \n");

  aosThdSleep(2);

  /* Initialize UWB system with the configuration provided in module_uwb_conf.c */

  int uwb_init = UWB_Init();

  if (0 != uwb_init){

    chprintf(stream, "UWB config error with return value: %d \n", uwb_init);

  }

  else {

    chprintf(stream, "UWB config success with return value: %d \n", uwb_init);

  }

  aosThdSleep(1);

  chprintf(stream, " Running the RTLS demo application \n");

  aosThdSleep(1);

  /* Run the localization system demo app as a thread */

  while(1){

    instance_run();

//    aosThdUSleep(10);

  }

#endif  /*  UNIT_TEST_SNIPPETS_DW1000 */

  return result;

}

#endif /* (AMIROOS_CFG_TESTS_ENABLE == true) && defined(AMIROLLD_CFG_DW1000) && (AMIROLLD_CFG_DW1000 == 1) */