AMiRo-OS

/*

    ChibiOS - Copyright (C) 2006..2017 Giovanni Di Sirio

    Licensed under the Apache License, Version 2.0 (the "License");

    you may not use this file except in compliance with the License.

    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software

    distributed under the License is distributed on an "AS IS" BASIS,

    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

    See the License for the specific language governing permissions and

    limitations under the License.

*/

/**

 * @file    templates/halconf.h

 * @brief   HAL configuration header.

 * @details HAL configuration file, this file allows to enable or disable the

 *          various device drivers from your application. You may also use

 *          this file in order to override the device drivers default settings.

 *

 * @addtogroup HAL_CONF

 * @{

 */

#ifndef HALCONF_H

#define HALCONF_H

#define _CHIBIOS_HAL_CONF_

#define _CHIBIOS_HAL_CONF_VER_6_0_

#include "mcuconf.h"

/**

 * @brief   Enables the PAL subsystem.

 */

#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)

#define HAL_USE_PAL                         TRUE

#endif

/**

 * @brief   Enables the ADC subsystem.

 */

#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)

#define HAL_USE_ADC                         FALSE

#endif

/**

 * @brief   Enables the CAN subsystem.

 */

#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)

#define HAL_USE_CAN                         TRUE

#endif

/**

 * @brief   Enables the cryptographic subsystem.

 */

#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)

#define HAL_USE_CRY                         FALSE

#endif

/**

 * @brief   Enables the DAC subsystem.

 */

#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)

#define HAL_USE_DAC                         FALSE

#endif

/**

 * @brief   Enables the EXT subsystem.

 */

#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)

#define HAL_USE_EXT                         FALSE

#endif

/**

 * @brief   Enables the GPT subsystem.

 */

#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)

#define HAL_USE_GPT                         FALSE

#endif

/**

 * @brief   Enables the I2C subsystem.

 */

#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)

#define HAL_USE_I2C                         FALSE

#endif

/**

 * @brief   Enables the I2S subsystem.

 */

#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)

#define HAL_USE_I2S                         FALSE

#endif

/**

 * @brief   Enables the ICU subsystem.

 */

#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)

#define HAL_USE_ICU                         FALSE

#endif

/**

 * @brief   Enables the MAC subsystem.

 */

#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)

#define HAL_USE_MAC                         FALSE

#endif

/**

 * @brief   Enables the MMC_SPI subsystem.

 */

#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)

#define HAL_USE_MMC_SPI                     FALSE

#endif

/**

 * @brief   Enables the PWM subsystem.

 */

#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)

#define HAL_USE_PWM                         FALSE

#endif

/**

 * @brief   Enables the QSPI subsystem.

 */

#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)

#define HAL_USE_QSPI                        FALSE

#endif

/**

 * @brief   Enables the RTC subsystem.

 */

#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)

#define HAL_USE_RTC                         TRUE

#endif

/**

 * @brief   Enables the SDC subsystem.

 */

#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)

#define HAL_USE_SDC                         FALSE

#endif

/**

 * @brief   Enables the SERIAL subsystem.

 */

#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)

#define HAL_USE_SERIAL                      TRUE

#endif

/**

 * @brief   Enables the SERIAL over USB subsystem.

 */

#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)

#define HAL_USE_SERIAL_USB                  FALSE

#endif

/**

 * @brief   Enables the SPI subsystem.

 */

#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)

#define HAL_USE_SPI                         FALSE

#endif

/**

 * @brief   Enables the UART subsystem.

 */

#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)

#define HAL_USE_UART                        FALSE

#endif

/**

 * @brief   Enables the USB subsystem.

 */

#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)

#define HAL_USE_USB                         FALSE

#endif

/**

 * @brief   Enables the WDG subsystem.

 */

#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)

#define HAL_USE_WDG                         FALSE

#endif

/*===========================================================================*/

/* PAL driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Enables synchronous APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)

#define PAL_USE_CALLBACKS                   TRUE

#endif

/**

 * @brief   Enables synchronous APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)

#define PAL_USE_WAIT                        FALSE

#endif

/*===========================================================================*/

/* ADC driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Enables synchronous APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)

#define ADC_USE_WAIT                        TRUE

#endif

/**

 * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

#define ADC_USE_MUTUAL_EXCLUSION            TRUE

#endif

/*===========================================================================*/

/* CAN driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Sleep mode related APIs inclusion switch.

 */

#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)

#define CAN_USE_SLEEP_MODE                  FALSE

#endif

/**

 * @brief   Enforces the driver to use direct callbacks rather than OSAL events.

 */

#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)

#define CAN_ENFORCE_USE_CALLBACKS           FALSE

#endif

/*===========================================================================*/

/* CRY driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Enables the SW fall-back of the cryptographic driver.

 * @details When enabled, this option, activates a fall-back software

 *          implementation for algorithms not supported by the underlying

 *          hardware.

 * @note    Fall-back implementations may not be present for all algorithms.

 */

#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)

#define HAL_CRY_USE_FALLBACK                FALSE

#endif

/**

 * @brief   Makes the driver forcibly use the fall-back implementations.

 */

#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)

#define HAL_CRY_ENFORCE_FALLBACK            FALSE

#endif

/*===========================================================================*/

/* DAC driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Enables synchronous APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)

#define DAC_USE_WAIT                        TRUE

#endif

/**

 * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

#define DAC_USE_MUTUAL_EXCLUSION            TRUE

#endif

/*===========================================================================*/

/* I2C driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Enables the mutual exclusion APIs on the I2C bus.

 */

#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

#define I2C_USE_MUTUAL_EXCLUSION            TRUE

#endif

/*===========================================================================*/

/* MAC driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Enables the zero-copy API.

 */

#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)

#define MAC_USE_ZERO_COPY                   FALSE

#endif

/**

 * @brief   Enables an event sources for incoming packets.

 */

#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)

#define MAC_USE_EVENTS                      FALSE

#endif

/*===========================================================================*/

/* MMC_SPI driver related settings.                                          */

/*===========================================================================*/

/**

 * @brief   Delays insertions.

 * @details If enabled this options inserts delays into the MMC waiting

 *          routines releasing some extra CPU time for the threads with

 *          lower priority, this may slow down the driver a bit however.

 *          This option is recommended also if the SPI driver does not

 *          use a DMA channel and heavily loads the CPU.

 */

#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)

#define MMC_NICE_WAITING                    FALSE

#endif

/*===========================================================================*/

/* QSPI driver related settings.                                             */

/*===========================================================================*/

/**

 * @brief   Enables synchronous APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(QSPI_USE_WAIT) || defined(__DOXYGEN__)

#define QSPI_USE_WAIT                       TRUE

#endif

/**

 * @brief   Enables the @p qspiAcquireBus() and @p qspiReleaseBus() APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(QSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

#define QSPI_USE_MUTUAL_EXCLUSION           TRUE

#endif

/*===========================================================================*/

/* SDC driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Number of initialization attempts before rejecting the card.

 * @note    Attempts are performed at 10mS intervals.

 */

#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)

#define SDC_INIT_RETRY                      100

#endif

/**

 * @brief   Include support for MMC cards.

 * @note    MMC support is not yet implemented so this option must be kept

 *          at @p FALSE.

 */

#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)

#define SDC_MMC_SUPPORT                     FALSE

#endif

/**

 * @brief   Delays insertions.

 * @details If enabled this options inserts delays into the MMC waiting

 *          routines releasing some extra CPU time for the threads with

 *          lower priority, this may slow down the driver a bit however.

 */

#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)

#define SDC_NICE_WAITING                    FALSE

#endif

/**

 * @brief   OCR initialization constant for V20 cards.

 */

#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)

#define SDC_INIT_OCR_V20                    0x50FF8000U

#endif

/**

 * @brief   OCR initialization constant for non-V20 cards.

 */

#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)

#define SDC_INIT_OCR                        0x80100000U

#endif

/*===========================================================================*/

/* SERIAL driver related settings.                                           */

/*===========================================================================*/

/**

 * @brief   Default bit rate.

 * @details Configuration parameter, this is the baud rate selected for the

 *          default configuration.

 */

#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)

#define SERIAL_DEFAULT_BITRATE              38400

#endif

/**

 * @brief   Serial buffers size.

 * @details Configuration parameter, you can change the depth of the queue

 *          buffers depending on the requirements of your application.

 * @note    The default is 16 bytes for both the transmission and receive

 *          buffers.

 */

#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)

#define SERIAL_BUFFERS_SIZE                 16

#endif

/*===========================================================================*/

/* SERIAL_USB driver related setting.                                        */

/*===========================================================================*/

/**

 * @brief   Serial over USB buffers size.

 * @details Configuration parameter, the buffer size must be a multiple of

 *          the USB data endpoint maximum packet size.

 * @note    The default is 256 bytes for both the transmission and receive

 *          buffers.

 */

#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)

#define SERIAL_USB_BUFFERS_SIZE             256

#endif

/**

 * @brief   Serial over USB number of buffers.

 * @note    The default is 2 buffers.

 */

#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)

#define SERIAL_USB_BUFFERS_NUMBER           2

#endif

/*===========================================================================*/

/* SPI driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Enables synchronous APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)

#define SPI_USE_WAIT                        TRUE

#endif

/**

 * @brief   Enables circular transfers APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)

#define SPI_USE_CIRCULAR                    FALSE

#endif

/**

 * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

#define SPI_USE_MUTUAL_EXCLUSION            TRUE

#endif

/**

 * @brief   Handling method for SPI CS line.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)

#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD

#endif

/*===========================================================================*/

/* UART driver related settings.                                             */

/*===========================================================================*/

/**

 * @brief   Enables synchronous APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)

#define UART_USE_WAIT                       FALSE

#endif

/**

 * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

#define UART_USE_MUTUAL_EXCLUSION           FALSE

#endif

/*===========================================================================*/

/* USB driver related settings.                                              */

/*===========================================================================*/

/**

 * @brief   Enables synchronous APIs.

 * @note    Disabling this option saves both code and data space.

 */

#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)

#define USB_USE_WAIT                        FALSE

#endif

#endif /* HALCONF_H */

/** @} */