amiro-lld / drivers / PCAL6524 / v1 / alld_PCAL6524.h @ 9466e34d
History | View | Annotate | Download (16.462 KB)
| 1 |
/*
|
|---|---|
| 2 |
AMiRo-LLD is a compilation of low-level hardware drivers for the Autonomous Mini Robot (AMiRo) platform.
|
| 3 |
Copyright (C) 2016..2019 Thomas Schöpping et al.
|
| 4 |
|
| 5 |
This program is free software: you can redistribute it and/or modify
|
| 6 |
it under the terms of the GNU Lesser General Public License as published by
|
| 7 |
the Free Software Foundation, either version 3 of the License, or
|
| 8 |
(at your option) any later version.
|
| 9 |
|
| 10 |
This program is distributed in the hope that it will be useful,
|
| 11 |
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| 12 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
| 13 |
GNU Lesser General Public License for more details.
|
| 14 |
|
| 15 |
You should have received a copy of the GNU Lesser General Public License
|
| 16 |
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
| 17 |
*/
|
| 18 |
|
| 19 |
/**
|
| 20 |
* @file alld_PCAL6524.h
|
| 21 |
* @brief GPIO extender macros and structures.
|
| 22 |
*
|
| 23 |
* @addtogroup lld_gpioext
|
| 24 |
* @{
|
| 25 |
*/
|
| 26 |
|
| 27 |
#ifndef AMIROLLD_PCAL6524_H
|
| 28 |
#define AMIROLLD_PCAL6524_H
|
| 29 |
|
| 30 |
#include <amiro-lld.h> |
| 31 |
|
| 32 |
/******************************************************************************/
|
| 33 |
/* CONSTANTS */
|
| 34 |
/******************************************************************************/
|
| 35 |
|
| 36 |
/**
|
| 37 |
* @brief Maximum I2C frequency.
|
| 38 |
*/
|
| 39 |
#define PCAL6524_LLD_I2C_MAXFREQUENCY 1000000 |
| 40 |
|
| 41 |
/**
|
| 42 |
* @brief A falling edge indicats an interrupt.
|
| 43 |
*/
|
| 44 |
#define PCAL6524_LLD_INT_EDGE APAL_GPIO_EDGE_FALLING
|
| 45 |
|
| 46 |
/******************************************************************************/
|
| 47 |
/* SETTINGS */
|
| 48 |
/******************************************************************************/
|
| 49 |
|
| 50 |
/******************************************************************************/
|
| 51 |
/* CHECKS */
|
| 52 |
/******************************************************************************/
|
| 53 |
|
| 54 |
/******************************************************************************/
|
| 55 |
/* DATA STRUCTURES AND TYPES */
|
| 56 |
/******************************************************************************/
|
| 57 |
|
| 58 |
/**
|
| 59 |
* @brief The PCAL6524Driver sruct.
|
| 60 |
*/
|
| 61 |
typedef struct { |
| 62 |
apalI2CDriver_t* i2cd; |
| 63 |
apalI2Caddr_t addr; |
| 64 |
} PCAL6524Driver; |
| 65 |
|
| 66 |
/**
|
| 67 |
* @brief Possible I2C address configurations.
|
| 68 |
*/
|
| 69 |
enum {
|
| 70 |
PCAL6524_LLD_I2C_ADDR_FIXED = 0x0020u, /**< Fixed part of the I2C address. */ |
| 71 |
PCAL6524_LLD_I2C_ADDR_SCL = 0x0020u, /**< ADDR pin connected to SCL. */ |
| 72 |
PCAL6524_LLD_I2C_ADDR_SDA = 0x0021u, /**< ADDR pin connected to SDA. */ |
| 73 |
PCAL6524_LLD_I2C_ADDR_VSS = 0x0022u, /**< ADDR pin connected to VSS. */ |
| 74 |
PCAL6524_LLD_I2C_ADDR_VDD = 0x0023u, /**< ADDR pin connected to VDD. */ |
| 75 |
PCAL6524_LLD_I2C_ADDR_DEVICEID = 0x007Cu, /**< Special address to read device ID information. */ |
| 76 |
}; |
| 77 |
|
| 78 |
/**
|
| 79 |
* @brief Command bit to enable auto-incrementation of command value.
|
| 80 |
* @details Can be added (ORed) to any command value.
|
| 81 |
*/
|
| 82 |
#define PCAL6524_LLD_CMD_AUTOINCREMENT 0x80u |
| 83 |
|
| 84 |
/**
|
| 85 |
* @brief The total number of registers that can be accessed.
|
| 86 |
* @note This is the maximum number of bytes that may be read or written continuously.
|
| 87 |
*/
|
| 88 |
#define PCAL6524_LLD_NUM_REGISTERS 52 |
| 89 |
|
| 90 |
typedef union { |
| 91 |
uint8_t raw[3];
|
| 92 |
struct {
|
| 93 |
uint16_t name : 12;
|
| 94 |
uint16_t part : 9;
|
| 95 |
uint8_t revision : 3;
|
| 96 |
}; |
| 97 |
} pcal6524_lld_deviceid_t; |
| 98 |
|
| 99 |
/**
|
| 100 |
* @brief Control commands for the PCAL6524.
|
| 101 |
*/
|
| 102 |
typedef enum { |
| 103 |
PCAL6524_LLD_CMD_INPUT_P0 = 0x00u, /**< read only */ |
| 104 |
PCAL6524_LLD_CMD_INPUT_P1 = 0x01u, /**< read only */ |
| 105 |
PCAL6524_LLD_CMD_INPUT_P2 = 0x02u, /**< read only */ |
| 106 |
PCAL6524_LLD_CMD_OUTPUT_P0 = 0x04u, /**< read/write */ |
| 107 |
PCAL6524_LLD_CMD_OUTPUT_P1 = 0x05u, /**< read/write */ |
| 108 |
PCAL6524_LLD_CMD_OUTPUT_P2 = 0x06u, /**< read/write */ |
| 109 |
PCAL6524_LLD_CMD_POLARITYINVERSION_P0 = 0x08u, /**< read/write */ |
| 110 |
PCAL6524_LLD_CMD_POLARITYINVERSION_P1 = 0x09u, /**< read/write */ |
| 111 |
PCAL6524_LLD_CMD_POLARITYINVERSION_P2 = 0x0Au, /**< read/write */ |
| 112 |
PCAL6524_LLD_CMD_CONFIGURATION_P0 = 0x0Cu, /**< read/write */ |
| 113 |
PCAL6524_LLD_CMD_CONFIGURATION_P1 = 0x0Du, /**< read/write */ |
| 114 |
PCAL6524_LLD_CMD_CONFIGURATION_P2 = 0x0Eu, /**< read/write */ |
| 115 |
PCAL6524_LLD_CMD_OUTPUTDRIVESTRENGTH_P0A = 0x40u, /**< read/write */ |
| 116 |
PCAL6524_LLD_CMD_OUTPUTDRIVESTRENGTH_P0B = 0x41u, /**< read/write */ |
| 117 |
PCAL6524_LLD_CMD_OUTPUTDRIVESTRENGTH_P1A = 0x42u, /**< read/write */ |
| 118 |
PCAL6524_LLD_CMD_OUTPUTDRIVESTRENGTH_P1B = 0x43u, /**< read/write */ |
| 119 |
PCAL6524_LLD_CMD_OUTPUTDRIVESTRENGTH_P2A = 0x44u, /**< read/write */ |
| 120 |
PCAL6524_LLD_CMD_OUTPUTDRIVESTRENGTH_P2B = 0x45u, /**< read/write */ |
| 121 |
PCAL6524_LLD_CMD_INPUTLATCH_P0 = 0x48u, /**< read/write */ |
| 122 |
PCAL6524_LLD_CMD_INPUTLATCH_P1 = 0x49u, /**< read/write */ |
| 123 |
PCAL6524_LLD_CMD_INPUTLATCH_P2 = 0x4Au, /**< read/write */ |
| 124 |
PCAL6524_LLD_CMD_PUPDENABLE_P0 = 0x4Cu, /**< read/write */ |
| 125 |
PCAL6524_LLD_CMD_PUPDENABLE_P1 = 0x4Du, /**< read/write */ |
| 126 |
PCAL6524_LLD_CMD_PUPDENABLE_P2 = 0x4Eu, /**< read/write */ |
| 127 |
PCAL6524_LLD_CMD_PUPDSELECTION_P0 = 0x50u, /**< read/write */ |
| 128 |
PCAL6524_LLD_CMD_PUPDSELECTION_P1 = 0x51u, /**< read/write */ |
| 129 |
PCAL6524_LLD_CMD_PUPDSELECTION_P2 = 0x52u, /**< read/write */ |
| 130 |
PCAL6524_LLD_CMD_INTERRUPTMASK_P0 = 0x54u, /**< read/write */ |
| 131 |
PCAL6524_LLD_CMD_INTERRUPTMASK_P1 = 0x55u, /**< read/write */ |
| 132 |
PCAL6524_LLD_CMD_INTERRUPTMASK_P2 = 0x56u, /**< read/write */ |
| 133 |
PCAL6524_LLD_CMD_INTERRUPTSTATUS_P0 = 0x58u, /**< read only */ |
| 134 |
PCAL6524_LLD_CMD_INTERRUPTSTATUS_P1 = 0x59u, /**< read only */ |
| 135 |
PCAL6524_LLD_CMD_INTERRUPTSTATUS_P2 = 0x5Au, /**< read only */ |
| 136 |
PCAL6524_LLD_CMD_OUTPUTCONFIGURATION = 0x5Cu, /**< read/write */ |
| 137 |
PCAL6524_LLD_CMD_INTERRUPTEDGE_P0A = 0x60u, /**< read/write */ |
| 138 |
PCAL6524_LLD_CMD_INTERRUPTEDGE_P0B = 0x61u, /**< read/write */ |
| 139 |
PCAL6524_LLD_CMD_INTERRUPTEDGE_P1A = 0x62u, /**< read/write */ |
| 140 |
PCAL6524_LLD_CMD_INTERRUPTEDGE_P1B = 0x63u, /**< read/write */ |
| 141 |
PCAL6524_LLD_CMD_INTERRUPTEDGE_P2A = 0x64u, /**< read/write */ |
| 142 |
PCAL6524_LLD_CMD_INTERRUPTEDGE_P2B = 0x65u, /**< read/write */ |
| 143 |
PCAL6524_LLD_CMD_INTERRUPTCLEAR_P0 = 0x68u, /**< write only */ |
| 144 |
PCAL6524_LLD_CMD_INTERRUPTCLEAR_P1 = 0x69u, /**< write only */ |
| 145 |
PCAL6524_LLD_CMD_INTERRUPTCLEAR_P2 = 0x6Au, /**< write only */ |
| 146 |
PCAL6524_LLD_CMD_INPUTSTATUS_P0 = 0x6Cu, /**< read only */ |
| 147 |
PCAL6524_LLD_CMD_INPUTSTATUS_P1 = 0x6Du, /**< read only */ |
| 148 |
PCAL6524_LLD_CMD_INPUTSTATUS_P2 = 0x6Eu, /**< read only */ |
| 149 |
PCAL6524_LLD_CMD_INDIVIDUALPINOUTPUTCONFIGURATION_P0 = 0x70u, /**< read/write */ |
| 150 |
PCAL6524_LLD_CMD_INDIVIDUALPINOUTPUTCONFIGURATION_P1 = 0x71u, /**< read/write */ |
| 151 |
PCAL6524_LLD_CMD_INDIVIDUALPINOUTPUTCONFIGURATION_P2 = 0x72u, /**< read/write */ |
| 152 |
PCAL6524_LLD_CMD_SWITCHDEBOUNCEENABLE_P0 = 0x74u, /**< read/write */ |
| 153 |
PCAL6524_LLD_CMD_SWITCHDEBOUNCEENABLE_P1 = 0x75u, /**< read/write */ |
| 154 |
PCAL6524_LLD_CMD_SWITCHDEBOUNCECOUNT = 0x76u, /**< read/write */ |
| 155 |
} pcal6524_lld_cmd_t; |
| 156 |
|
| 157 |
/**
|
| 158 |
* @brief Input register bit values.
|
| 159 |
* @details The bits in the input register reflect the incoming logic levels per pin.
|
| 160 |
* If a pin is configured as ouput, the bit reflects th set value or is forced to 0 in case the outpus is configured as open-drain.
|
| 161 |
* If a pin is configured as input with latched interrupts, reading the according port will reset the input value and clear the interrupt.
|
| 162 |
*/
|
| 163 |
typedef enum { |
| 164 |
PCAL6524_LLD_INPUT_LOW = 0b0,
|
| 165 |
PCAL6524_LLD_INPUT_HIGH = 0b1,
|
| 166 |
} pcal6524_lld_input_t; |
| 167 |
|
| 168 |
/**
|
| 169 |
* @brief Output register bit values.
|
| 170 |
* @details Defines the logic level to be driven by output pins.
|
| 171 |
* The default value (after reset) is 0b1 (high),
|
| 172 |
*/
|
| 173 |
typedef enum { |
| 174 |
PCAL6524_LLD_OUTPUT_LOW = 0b0,
|
| 175 |
PCAL6524_LLD_OUTPUT_HIGH = 0b1,
|
| 176 |
} pcal6524_lld_output_t; |
| 177 |
|
| 178 |
/**
|
| 179 |
* @brief Polarity inversion register values.
|
| 180 |
* @details Allows to inverse the logic values written to the input register.
|
| 181 |
* The default value (after reset) is 0b0 (disabled).
|
| 182 |
*/
|
| 183 |
typedef enum { |
| 184 |
PCAL6524_LLD_POLARITYINVERSION_DISABLED = 0b0,
|
| 185 |
PCAL6524_LLD_POLARITYINVERSION_ENABLED = 0b1,
|
| 186 |
} pcal6524_lld_polarityinversion_t; |
| 187 |
|
| 188 |
/**
|
| 189 |
* @brief Configuration regsiter bit values.
|
| 190 |
* @details Configures the direction of the I/O pins to either high-impedance input or output.
|
| 191 |
* The default value (after reset) is 0b1 (input).
|
| 192 |
*/
|
| 193 |
typedef enum { |
| 194 |
PCAL6524_LLD_CONFIGURATION_INPUT = 0b1,
|
| 195 |
PCAL6524_LLD_CONFIGURATION_OUTPUT = 0b0,
|
| 196 |
} pcal6524_lld_configuration_t; |
| 197 |
|
| 198 |
/**
|
| 199 |
* @brief Output drive strength register mask values.
|
| 200 |
* @details Configures maximum current of output pins can be defined via a 2 bit mask per pin.
|
| 201 |
* Toggling multiple output pins simultaneously a peak current may induce noise to supply voltage and ground.
|
| 202 |
* By lowering the maximum current per pin. this effect can be minimized.
|
| 203 |
* The default value (after reset) is 0b11 (factor 1x)
|
| 204 |
*/
|
| 205 |
typedef enum { |
| 206 |
PCAL6524_LL_OUTPUTDRIVESTRENGTH_0_25 = 0b00,
|
| 207 |
PCAL6524_LL_OUTPUTDRIVESTRENGTH_0_5 = 0b01,
|
| 208 |
PCAL6524_LL_OUTPUTDRIVESTRENGTH_0_75 = 0b10,
|
| 209 |
PCAL6524_LL_OUTPUTDRIVESTRENGTH_1 = 0b11,
|
| 210 |
} pcal6524_lld_outputdrivestrength_t; |
| 211 |
|
| 212 |
/**
|
| 213 |
* @brief Input latch register bit values.
|
| 214 |
* @details Allows to latch interrupt and input states per pin, if an interrupt occurred.
|
| 215 |
* The default value (after reset) is 0b0 (disabled).
|
| 216 |
*/
|
| 217 |
typedef enum { |
| 218 |
PCAL6524_LLD_INPUTLATCH_ENABLED = 0b1,
|
| 219 |
PCAL6524_LLD_INPUTLATCH_DISABLED = 0b0,
|
| 220 |
} pcal6524_lld_inputlatch_t; |
| 221 |
|
| 222 |
/**
|
| 223 |
* @brief Pull-up/Pull-down enable register bis values.
|
| 224 |
* @details Configures per pin whether the pull-up/pull-down resistors shall be enabled.
|
| 225 |
* If a pin is configured as open-drain output, the setting in this register are overridden and the resistors are disconnected.
|
| 226 |
* The default value (after reset) is 0b0 (disabled).
|
| 227 |
*/
|
| 228 |
typedef enum { |
| 229 |
PCAL6524_LLD_PUPD_ENABLED = 0b1,
|
| 230 |
PCAL6524_LLD_PUPD_DISABLED = 0b0,
|
| 231 |
} pcal6524_lld_pupdenable_t; |
| 232 |
|
| 233 |
/**
|
| 234 |
* @brief Pull-up/Pull-dpwn selection register bit values.
|
| 235 |
* @details Selects between pull-up and pull-down resistor (100 kΩ) per pin.
|
| 236 |
* Has no effect if the according bit is the pull-up/pull-down enable register is disabled.
|
| 237 |
* The default value (after reset) is 0b1 (pull-up).
|
| 238 |
*/
|
| 239 |
typedef enum { |
| 240 |
PCAL6524_LLD_PUPDSELECTION_PULLUP = 0b1,
|
| 241 |
PCAL6524_LLD_PUPDSELECTION_PULLDOWN = 0b0,
|
| 242 |
} pcal6524_lld_pupdselection_t; |
| 243 |
|
| 244 |
/**
|
| 245 |
* @brief Interrupt mask register bit values.
|
| 246 |
* @details Allows to enable (value 0) or disable (value 1) interrupts per pin.
|
| 247 |
* The default value (after reset) is 0b1 (interrupt disabled).
|
| 248 |
*/
|
| 249 |
typedef enum { |
| 250 |
PCAL6524_LLD_INTERRUPTMASK_ENABLED = 0b0,
|
| 251 |
PCAL6524_LLD_INTERRUPTMASK_DSIABLED = 0b1,
|
| 252 |
} pcal6524_lld_interruptmask_t; |
| 253 |
|
| 254 |
/**
|
| 255 |
* @brief Interrupt status register bit value.
|
| 256 |
* @details Indicates whether an interrupt occurred per pin.
|
| 257 |
* After reset the register is initialized with 0b0 (no interrupt occurred yet).
|
| 258 |
*/
|
| 259 |
typedef enum { |
| 260 |
PCAL6524_LLD_INTERRUPTSTATUS_ACTIVE = 0b1,
|
| 261 |
PCAL6524_LLD_INTERRUPTSTATUS_INACTIVE = 0b0,
|
| 262 |
} pcal6542_lld_interruptstatus_t; |
| 263 |
|
| 264 |
/**
|
| 265 |
* @brief Output port configuration register mask of valid bits.
|
| 266 |
*/
|
| 267 |
#define PCAL6524_LLD_OUTPUTCONFIGURATION_MASK 0x07u |
| 268 |
|
| 269 |
/**
|
| 270 |
* @brief Output port configuration register mask for I/O port 0.
|
| 271 |
*/
|
| 272 |
#define PCAL6524_LLD_OUTPUTCONFIGURATION_MASK_PORT0 0x01u |
| 273 |
|
| 274 |
/**
|
| 275 |
* @brief Output port configuration register mask for I/O port 1.
|
| 276 |
*/
|
| 277 |
#define PCAL6524_LLD_OUTPUTCONFIGURATION_MASK_PORT1 0x02u |
| 278 |
|
| 279 |
/**
|
| 280 |
* @brief Output port configuration register mask for I/O port 2.
|
| 281 |
*/
|
| 282 |
#define PCAL6524_LLD_OUTPUTCONFIGURATION_MASK_PORT2 0x04u |
| 283 |
|
| 284 |
/**
|
| 285 |
* @brief Output port configuration register bit values.
|
| 286 |
* @details Configures all ouput pins per port to be push-pull or open-drain.
|
| 287 |
* The default value (after reset) is 0b0 (push-pull).
|
| 288 |
*/
|
| 289 |
typedef enum { |
| 290 |
PCAL6524_LLD_OUTPUTCONFIGURATION_PUSHPULL = 0b0,
|
| 291 |
PCAL6524_LLD_OUTPUTCONFIGURATION_OPENDRAIN = 0b1,
|
| 292 |
} pcal6524_lld_outputconfiguration_t; |
| 293 |
|
| 294 |
/**
|
| 295 |
* @brief Interrupt edge register mask values.
|
| 296 |
* @details Configures the type of event that would cause an interrupt per pin.
|
| 297 |
* The default value (after reset) is 0b00 (level triggered).
|
| 298 |
*/
|
| 299 |
typedef enum { |
| 300 |
PCAL6524_LLD_INTERRUPTEDGE_LEVELTRIGGERED = 0b00,
|
| 301 |
PCAL6524_LLD_INTERRUPTEDGE_RISINGEDGE = 0b01,
|
| 302 |
PCAL6524_LLD_INTERRUPTEDGE_FALLINGEDGE = 0b10,
|
| 303 |
PCAL6524_LLD_INTERRUPTEDGE_ANYEDGE = 0b11,
|
| 304 |
} pcal6524_lld_interruptedge_t; |
| 305 |
|
| 306 |
/**
|
| 307 |
* @brief Input status register bit values.
|
| 308 |
* @details Reflects the current logic level per pin similar to the input register.
|
| 309 |
* However, values are not latched and reading the register will not reset interrupts.
|
| 310 |
*/
|
| 311 |
typedef enum { |
| 312 |
PCAL6524_LLD_INPUTSTATUS_LOW = 0b0,
|
| 313 |
PCAL6524_LLD_INPUTSTATUS_HIGH = 0b1,
|
| 314 |
} pcal6524_lld_inputstatus_t; |
| 315 |
|
| 316 |
/**
|
| 317 |
* @brief Individual pin output configuration register bit values.
|
| 318 |
* @details Can be used to invert the port-wide push-pull/open-drain configuration via the ouput port configuration register per pin.
|
| 319 |
* the default value (after reset) is 0b0 (not inverted).
|
| 320 |
*/
|
| 321 |
typedef enum { |
| 322 |
PCAL6524_LLD_INDIVIDUALPINOUTPUTCONFIGURATION_PORT = 0b0,
|
| 323 |
PCAL6524_LLD_INDIVIDUALPINOUTPUTCONFIGURATION_INVERTED = 0b1,
|
| 324 |
} pcal6524_lld_individualpinoutputconfiguration_t; |
| 325 |
|
| 326 |
/**
|
| 327 |
* @brief Switch debounce enable register bit values.
|
| 328 |
* @details Allows to enable debounce functionality for I/O ports 0 and 1.
|
| 329 |
* In order to use the debounce feature, an oscillator signal must be applied to pin 0 of port 0.
|
| 330 |
* The default value (after reset) is 0b0 (disabled).
|
| 331 |
*/
|
| 332 |
typedef enum { |
| 333 |
PCAL6524_LLD_SWITCHDEBOUNCE_ENABLED = 0b1,
|
| 334 |
PCAL6524_LLD_SWITCHDEBOUNCE_DISABLED = 0b0,
|
| 335 |
} pcal6524_lld_switchdebounceenable_t; |
| 336 |
|
| 337 |
/******************************************************************************/
|
| 338 |
/* MACROS */
|
| 339 |
/******************************************************************************/
|
| 340 |
|
| 341 |
/******************************************************************************/
|
| 342 |
/* EXTERN DECLARATIONS */
|
| 343 |
/******************************************************************************/
|
| 344 |
|
| 345 |
#ifdef __cplusplus
|
| 346 |
extern "C" { |
| 347 |
#endif
|
| 348 |
uint8_t pcal6524_lld_cmd_groupsize(const pcal6524_lld_cmd_t cmd);
|
| 349 |
|
| 350 |
// apalExitStatus_t pcal6524_lld_read_id(const PCAL6524Driver* const pcal6524d, uint8_t* const data, const apalTime_t timeout);
|
| 351 |
apalExitStatus_t pcal6524_lld_read_reg(const PCAL6524Driver* const pcal6524d, const pcal6524_lld_cmd_t reg, uint8_t* const data, const apalTime_t timeout); |
| 352 |
apalExitStatus_t pcal6524_lld_write_reg(const PCAL6524Driver* const pcal6524d, const pcal6524_lld_cmd_t reg, const uint8_t data, const apalTime_t timeout); |
| 353 |
apalExitStatus_t pcal6524_lld_read_group(const PCAL6524Driver* const pcal6524d, const pcal6524_lld_cmd_t reg, uint8_t* const data, const apalTime_t timeout); |
| 354 |
apalExitStatus_t pcal6524_lld_write_group(const PCAL6524Driver* const pcal6524d, const pcal6524_lld_cmd_t reg, const uint8_t* const data, const apalTime_t timeout); |
| 355 |
apalExitStatus_t pcal6524_lld_read_continuous(const PCAL6524Driver* const pcal6524d, const pcal6524_lld_cmd_t reg, uint8_t* const data, const uint8_t length, const apalTime_t timeout); |
| 356 |
apalExitStatus_t pcal6524_lld_write_continuous(const PCAL6524Driver* const pcal6524d, const pcal6524_lld_cmd_t reg, const uint8_t* const data, const uint8_t length, const apalTime_t timeout); |
| 357 |
#ifdef __cplusplus
|
| 358 |
} |
| 359 |
#endif
|
| 360 |
|
| 361 |
/******************************************************************************/
|
| 362 |
/* INLINE FUNCTIONS */
|
| 363 |
/******************************************************************************/
|
| 364 |
|
| 365 |
#endif /* AMIROLLD_PCAL6524_H */ |
| 366 |
|
| 367 |
/** @} */
|
| 368 |
|