AMiRo-OS

#include <string.h>

#include <amiro/util/util.h>

#include <amiro/bus/spi/HWSPIDriver.hpp>

#include <amiro/accel/lis331dlh.hpp>

#include <chprintf.h>

#include <cmath>  // abs()

#include <amiro/Constants.h>

#include <global.hpp>

namespace amiro {

extern Global global;

LIS331DLH::

LIS331DLH(HWSPIDriver *driver) :

  driver(driver),

  currentFullScaleConfiguration(FS_2G) {

}

LIS331DLH::

~LIS331DLH() {

}

chibios_rt::EvtSource*

LIS331DLH::

getEventSource() {

  return &this->eventSource;

}

int16_t

LIS331DLH::

getAcceleration(const uint8_t axis) {

  return this->accelerations[axis];

}

int16_t

LIS331DLH::

getAccelerationForce(const uint8_t axis) {

  int16_t result;

  switch(this->currentFullScaleConfiguration) {

  default:

  case(FS_2G):

    // Should be this->accelerations[axis] * 0.9765625

    result = this->accelerations[axis];

    break;

  case(FS_4G):

      // Should be this->accelerations[axis] * 1.953125

      result =  this->accelerations[axis] << 1;

    break;

  case(FS_8G):

      // Should be this->accelerations[axis] * 3.90625

      result =  this->accelerations[axis] << 2;

    break;

  }

  return result;

}

msg_t

LIS331DLH::

main() {

  this->setName("Lis331dlh");

  while (!this->shouldTerminate()) {

    updateSensorData();

    this->eventSource.broadcastFlags(0);

    this->waitAnyEventTimeout(ALL_EVENTS, CAN::UPDATE_PERIOD);

  }

  return RDY_OK;

}

void

LIS331DLH::

updateSensorData() {

  const size_t buffer_size = offsetof(LIS331DLH::registers, out_z)

                             - offsetof(LIS331DLH::registers, status_reg)

                             + MEMBER_SIZE(LIS331DLH::registers, out_z)

                             + 1; /* addressing */

  uint8_t buffer[buffer_size];

  uint8_t sreg;

  // this might be three-wire so we need to send ones

  memset(buffer, 0xFFu, buffer_size);

  buffer[0] = offsetof(LIS331DLH::registers, status_reg) | LIS331DLH::SPI_MULT | LIS331DLH::SPI_READ;

  this->driver->exchange(buffer, buffer, buffer_size);

  // assemble data

  sreg = buffer[1];

  if (sreg & LIS331DLH::XDA)

    this->accelerations[LIS331DLH::AXIS_X] = int16_t((buffer[3] << 8) | buffer[2]) >> 4;

  if (sreg & LIS331DLH::YDA)

    this->accelerations[LIS331DLH::AXIS_Y] = int16_t((buffer[5] << 8) | buffer[4]) >> 4;

  if (sreg & LIS331DLH::ZDA)

    this->accelerations[LIS331DLH::AXIS_Z] = int16_t((buffer[7] << 8) | buffer[6]) >> 4;

}

msg_t

LIS331DLH::

configure(LIS331DLHConfig *config) {

  const size_t ctrl_reg_size = offsetof(LIS331DLH::registers, ctrl_reg5)

                               - offsetof(LIS331DLH::registers, ctrl_reg1)

                               + MEMBER_SIZE(LIS331DLH::registers, ctrl_reg5)

                               + 1; /* addressing */

  const size_t int_reg_size = offsetof(LIS331DLH::registers, int1_duration)

                              - offsetof(LIS331DLH::registers, int1_cfg)

                              + MEMBER_SIZE(LIS331DLH::registers, int1_duration) /* linear interrupt config */

                              + MEMBER_SIZE(LIS331DLH::registers, int1_src)

                              + MEMBER_SIZE(LIS331DLH::registers, int1_src) /* 2x size of int1_src */

                              + 1; /* addressing */

  const size_t buffer_size = ctrl_reg_size > int_reg_size ? ctrl_reg_size : int_reg_size;

  uint8_t buffer[buffer_size];

  InterruptConfig *int_cfg = &config->int1_cfg;

  uint8_t i;

  // write interrupt config first

  for (i = 0x00u; i < 2; i++, int_cfg++) {

    // this might be three-wire so we need to send ones

    memset(buffer, 0xFFu, buffer_size);

    if (!i)

      buffer[0] = offsetof(LIS331DLH::registers, int1_cfg);

    else

      buffer[0] = offsetof(LIS331DLH::registers, int2_cfg);

    buffer[5] = buffer[0] + offsetof(LIS331DLH::registers, int1_src) - offsetof(LIS331DLH::registers, int1_cfg);

    buffer[5] |= LIS331DLH::SPI_READ;

    buffer[6] = 0xFFu,

    buffer[0] |= LIS331DLH::SPI_MULT | LIS331DLH::SPI_WRITE;

    buffer[1] = int_cfg->config;

    buffer[2] = 0xFFu; /* skip source register */

    buffer[3] = int_cfg->ths;

    buffer[4] = int_cfg->duration;

    this->driver->write(&buffer[0], 5);

    // read intN_src register to clear IA

    this->driver->exchange(&buffer[5], &buffer[5], 2);

  }

  // write control config

  // this might be three-wire so we need to send ones

  memset(buffer, 0xFFu, buffer_size);

  buffer[0] = offsetof(LIS331DLH::registers, ctrl_reg1) | LIS331DLH::SPI_MULT | LIS331DLH::SPI_WRITE;

  buffer[1] = config->ctrl1;

  buffer[2] = config->ctrl2;

  buffer[3] = config->ctrl3;

  buffer[4] = config->ctrl4;

  buffer[5] = config->ctrl5;

  this->driver->write(buffer, 6);

  // reset hp filter

  buffer[0] = offsetof(LIS331DLH::registers, hp_filter_reset) | LIS331DLH::SPI_WRITE;

  this->driver->write(buffer, 1);

  // Store the full scale configuration for acceleration decoding

  this->currentFullScaleConfiguration = config->ctrl4 & LIS331DLH::FS_8G;

  return RDY_OK;

}

uint8_t

LIS331DLH::

getCheck() {

  const size_t buffer_size = 1 /* addressing */

                             + 1; /* who am i */

  uint8_t buffer[buffer_size];

  // Exchange the data with the LIS331DLH accelerometer

  // Specify the adress and the mode

  buffer[0] = offsetof(LIS331DLH::registers, who_am_i) | LIS331DLH::SPI_READ;

  this->driver->exchange(buffer, buffer, buffer_size);

  // Check

  if (buffer[1] == LIS331DLH::LIS331DLH_ID) {

    return LIS331DLH::CHECK_OK;

  } else {

    return LIS331DLH::CHECK_FAIL;

  }

}

void

LIS331DLH::

printSelfTest(LIS331DLHConfig* config) {

  // Running the build in test from LIS331DLH manual and compare the

  // measured values against table 3

  const uint8_t amountOfMeanValues = 10;

  const uint32_t sleepBetweenMeasurementMs = 500;

  int32_t accel;

  // Choose a defined config, if none is given

  LIS331DLH::LIS331DLHConfig test_accel_run_cfg;

  if (config == NULL) {

    LIS331DLH::LIS331DLHConfig accel_run_cfg_tmp = {

    /* ctrl1    */LIS331DLH::PM_ODR | LIS331DLH::DR_50HZ_37LP | LIS331DLH::ZEN

        | LIS331DLH::YEN | LIS331DLH::XEN,

    /* ctrl2    */0x00u,

    /* ctrl3    */LIS331DLH::INT_LOW | LIS331DLH::I1_CFG_DRY,

    /* ctrl4    */LIS331DLH::BDU_CONT | LIS331DLH::BLE_LE | LIS331DLH::FS_8G

        | LIS331DLH::SIM_4WI,

    /* ctrl5    */LIS331DLH::SLEEP_TO_WAKE_OFF,

    /* int1_cfg */

    {

    /* config   */LIS331DLH::AOI_OR_INT,

    /* ths      */0x00u,

    /* duration */0x00u, },

    /* int2_cfg */

    {

    /* config   */LIS331DLH::AOI_OR_INT,

    /* ths      */0x00u,

    /* duration */0x00u, }, };

    test_accel_run_cfg = accel_run_cfg_tmp;

  } else {

    // Save the given config

    test_accel_run_cfg = *config;

  }

  // 1. Get some standard values

  // Configure for the test

  test_accel_run_cfg.ctrl4 = LIS331DLH::BDU_CONT | LIS331DLH::BLE_LE

      | LIS331DLH::FS_2G | LIS331DLH::SIM_4WI;

  this->configure(&test_accel_run_cfg);

  BaseThread::sleep(MS2ST(sleepBetweenMeasurementMs));

  // Grep some values and build the mean value

  chprintf((BaseSequentialStream*) &global.sercanmux1, "\nACC: Get acc std values\n");

  int32_t stdAccValues[3] = { this->getAcceleration(LIS331DLH::AXIS_X), this

      ->getAcceleration(LIS331DLH::AXIS_Y), this->getAcceleration(

      LIS331DLH::AXIS_Z) };

  for (uint8_t n = 1; n < amountOfMeanValues; ++n) {

    BaseThread::sleep(MS2ST(sleepBetweenMeasurementMs));

    for (uint8_t i = LIS331DLH::AXIS_X; i <= LIS331DLH::AXIS_Z; i++) {

      accel = int32_t(this->getAcceleration(i));

      stdAccValues[i] = (stdAccValues[i] * n + accel) / (n + 1);

      chprintf((BaseSequentialStream*) &global.sercanmux1, "%c%d:%d ", accel < 0 ? '-' : '+',

                accel < 0 ? -accel : accel, stdAccValues[i]);

    }

    chprintf((BaseSequentialStream*) &global.sercanmux1, "\n");

  }

  // 2. Apply negative offset

  // Configure for the test

  test_accel_run_cfg.ctrl4 = LIS331DLH::BDU_CONT | LIS331DLH::BLE_LE

      | LIS331DLH::FS_2G | LIS331DLH::SIM_4WI | LIS331DLH::ST_ENABLE

      | LIS331DLH::STSIGN_NEG;

  this->configure(&test_accel_run_cfg);

  BaseThread::sleep(MS2ST(sleepBetweenMeasurementMs));

  // Grep some values and build the mean value

  chprintf((BaseSequentialStream*) &global.sercanmux1, "\nACC: Get acc neg values\n");

  int16_t negAccValues[3] = { this->getAcceleration(LIS331DLH::AXIS_X), this

      ->getAcceleration(LIS331DLH::AXIS_Y), this->getAcceleration(

      LIS331DLH::AXIS_Z) };

  for (uint8_t n = 1; n < amountOfMeanValues; ++n) {

    BaseThread::sleep(MS2ST(sleepBetweenMeasurementMs));

    for (uint8_t i = LIS331DLH::AXIS_X; i <= LIS331DLH::AXIS_Z; i++) {

      accel = int32_t(this->getAcceleration(i));

      negAccValues[i] = (negAccValues[i] * n + accel) / (n + 1);

      chprintf((BaseSequentialStream*) &global.sercanmux1, "%c%d:%d ", accel < 0 ? '-' : '+',

                accel < 0 ? -accel : accel, negAccValues[i]);

    }

    chprintf((BaseSequentialStream*) &global.sercanmux1, "\n");

  }

  // 2. Apply positive offset

  // Configure for the test

  test_accel_run_cfg.ctrl4 = LIS331DLH::BDU_CONT | LIS331DLH::BLE_LE

      | LIS331DLH::FS_2G | LIS331DLH::SIM_4WI | LIS331DLH::ST_ENABLE

      | LIS331DLH::STSIGN_POS;

  this->configure(&test_accel_run_cfg);

  BaseThread::sleep(MS2ST(sleepBetweenMeasurementMs));

  // Grep some values and build the mean value

  chprintf((BaseSequentialStream*) &global.sercanmux1, "\nACC: Get acc pos values\n");

  int16_t posAccValues[3] = { this->getAcceleration(LIS331DLH::AXIS_X), this

      ->getAcceleration(LIS331DLH::AXIS_Y), this->getAcceleration(

      LIS331DLH::AXIS_Z) };

  for (uint8_t n = 1; n < amountOfMeanValues; ++n) {

    BaseThread::sleep(MS2ST(sleepBetweenMeasurementMs));

    for (uint8_t i = LIS331DLH::AXIS_X; i <= LIS331DLH::AXIS_Z; i++) {

      accel = int32_t(this->getAcceleration(i));

      posAccValues[i] = (posAccValues[i] * n + accel) / (n + 1);

      chprintf((BaseSequentialStream*) &global.sercanmux1, "%c%d:%d ", accel < 0 ? '-' : '+',

                accel < 0 ? -accel : accel, posAccValues[i]);

    }

    chprintf((BaseSequentialStream*) &global.sercanmux1, "\n");

  }

  // Get the amplitude change and compare it to the standard values from LIS331DLH manual table 3

  int32_t amp;

  const int32_t ampXmax = 550, ampYmax = 550, ampZmax = 750;

  const int32_t ampXmin = 120, ampYmin = 120, ampZmin = 140;

  // TEST

  chprintf((BaseSequentialStream*) &global.sercanmux1, "\n\nACC: Testresult\n");

  amp = std::abs(

      stdAccValues[LIS331DLH::AXIS_X] - negAccValues[LIS331DLH::AXIS_X]);

  if (amp < ampXmin || amp > ampXmax)

    chprintf((BaseSequentialStream*) &global.sercanmux1, "ACC: Negative x-axis faulty\n");

  amp = std::abs(

      stdAccValues[LIS331DLH::AXIS_Y] - negAccValues[LIS331DLH::AXIS_Y]);

  if (amp < ampYmin || amp > ampYmax)

    chprintf((BaseSequentialStream*) &global.sercanmux1, "ACC: Negative y-axis faulty\n");

  amp = std::abs(

      stdAccValues[LIS331DLH::AXIS_Z] - negAccValues[LIS331DLH::AXIS_Z]);

  if (amp < ampZmin || amp > ampZmax)

    chprintf((BaseSequentialStream*) &global.sercanmux1, "ACC: Negative z-axis faulty\n");

  amp = std::abs(

      stdAccValues[LIS331DLH::AXIS_X] - posAccValues[LIS331DLH::AXIS_X]);

  if (amp < ampXmin || amp > ampXmax)

    chprintf((BaseSequentialStream*) &global.sercanmux1, "ACC: Positive x-axis faulty\n");

  amp = std::abs(

      stdAccValues[LIS331DLH::AXIS_Y] - posAccValues[LIS331DLH::AXIS_Y]);

  if (amp < ampYmin || amp > ampYmax)

    chprintf((BaseSequentialStream*) &global.sercanmux1, "ACC: Positive y-axis faulty\n");

  amp = std::abs(

      stdAccValues[LIS331DLH::AXIS_Z] - posAccValues[LIS331DLH::AXIS_Z]);

  if (amp < ampZmin || amp > ampZmax)

    chprintf((BaseSequentialStream*) &global.sercanmux1, "ACC: Positive z-axis faulty\n");

  // Write back the original config

  this->configure(config);

}

} /* amiro */